scholarly journals The western termination of the South Pyrenean Triangle Zone; a structural and geophysical characterization.

Author(s):  
Pablo Santolaria ◽  
Concepción Ayala ◽  
Emilio L. Pueyo ◽  
Félix M. Rubio ◽  
Ruth Soto ◽  
...  

<p>The presence of multiple evaporite levels strongly influence the structural style and kinematics of fold-and-thrust belts. Particularly (but not exclusively) in their fronts, it is common for these décollements to favor the formation of triangle zones. In the central portion of the Pyrenees, the South Pyrenean Triangle Zone represents the frontal part of this chain, that involves the Oligocene-Miocene Ebro Basin foreland deposits. We have focused on its western termination, characterized by a salt-cored anticline that laterally passes to a backthrust which dies out to the west. These structures are detached on the Upper Eocene-Lower Oligocene syntectonic evaporite Barbastro Formation (and lateral equivalents) that acted as a multidetachment unit. To the north, the south-directed Pyrenean thrust unit detached on Middle-Upper Triassic evaporites to finally glide along the Upper Eocene-Lower Oligocene décollement horizons.</p><p>In this contribution, we present a detailed structural and stratigraphic model of this triangle zone termination, constructed accordingly to two major approaches (1) constraining the geometry and structural architecture based on surface geology, interpretation of seismic lines (>900 km) and wells and, (2) obtaining the 3D density distribution of the detachment level (Barbastro Fm. and lateral equivalents as well as deeper, Triassic evaporites) using gravity stochastic inversion by means of more than 7000 gravity stations and 1500 actual density data from surface rocks. All in all, this multidisciplinary approach allows us to characterize the western termination of the South Pyrenean Triangle zone as the transition from a ramp-dominated and multiple triangle zone to a detachment-dominated one whose geometry, kinematics, and location were controlled by the distribution and heterogeneity of the Upper Eocene-Lower Oligocene syntectonic décollements and the southern pinch-out of the basal detachment of this unit.</p>


The Aquitaine Basin, situated in southwest France, with an area of about 60 000 km 2 , has the form of a triangle which opens towards the Atlantic (Bay of Biscay) and is limited to the north by the Hercynian basement of Brittany and the Massif Central, and to the south by the Pyrenean Tertiary orogenic belt. Beneath the Tertiary sequence (2 km thick, and which outcrops over much of the basin) a Mesozoic series, up to 10 km thick, rests generally on a tectonized Hercynian basement but locally it covers narrow (NW-SE-trending) post-orogenic trenches of Stephano-Permian age. The Mesozoic history can be subdivided into four major structural-sedimentary episodes: (1) during a Triassic taphrogenic phase a continental-evaporitic complex developed with associated basic magmatism; (2) throughout the Jurassic, a vast lagoonal platform developed, initially (Lower Lias) as a thick evaporitic sequence followed by a uniform shale-carbonate unit, indicating a relative structural stability; (3) the end of the Jurassic and the Lower Cretaceous saw a fragmentation of this platform, due to an interplay between the Iberian and European tectonic plates, resulting in an ensemble of strongly subsident sub-basins; (4) during the Upper Cretaceous and until the end of the Neogene, the evolution of the Aquitaine Basin was influenced by the Pyrenean orogenic phase, with the development, towards the south, of a trench infilled by flysch which, from the Upper Eocene, is succeeded by a thick post-orogenic molasse complex. The main hydrocarbon objectives in the basin are situated in the Jurassic platform (e.g. the Lacq giant gas field) and the Cretaceous sub-basins (e.g. the Cazaux and Parentis oil fields). To date, production has been about 4 x 10 7 m 3 of oil, and about 15 x 10 10 m 3 of gas since the first gas discovery (St Marcet) in 1939.



2017 ◽  
Vol 5 (1) ◽  
pp. SD81-SD98 ◽  
Author(s):  
Majid Shahpasandzadeh ◽  
Hemin Koyi ◽  
Faramarz Nilfouroushan

The switch in direction of convergence between Central Iran and the Eurasian Plate is believed to have a significant impact on the structural style in the Alborz Mountains, in the north of Iran. To understand the deformation pattern and investigate the influence of the South Caspian Basin kinematics since the middle Miocene on the structural styles and active tectonics of the Alborz Mountains, a series of scaled analogue models were prepared, in which passively layered loose sand simulating the sedimentary units were subjected to orthogonal and subsequently oblique shortening by a rigid indenter. Model results indicate that during the shortening, an arcuate-shaped foreland-vergent imbricate stack forms in front of the indenter. The orthogonal shortening is characterized by a prevailing right-lateral and left-lateral oblique-slip motion in the east and west of the model, respectively. This shift in kinematics contradicts the proposed preneotectonic (orthogonal) model of the Alborz. However, during oblique shortening, model results show that deformation is mainly accommodated by left-lateral transpression within the sand wedge and internal deformation. Oblique shortening is consistently accommodated by continued left-lateral motion on the west-northwest-trending oblique thrusts, whereas the east–west-trending thrusts and the preexisting east-northeast-trending right-lateral oblique thrusts reactivate as left-lateral oblique faults. Precise monitoring of the model surface also illustrates partitioning of shortening into the foreland-vergent left-lateral thrusting in the south and hinterland-vergent back thrusting in the north. These model results are generally consistent with field observations and GPS data of structure and kinematics of the Alborz Mountains.



2002 ◽  
Vol 173 (6) ◽  
pp. 523-532 ◽  
Author(s):  
Bernard Peybernès ◽  
Marie-José Fondecave-Wallez ◽  
Pierre-Jean Combes

Abstract Recently, have been evidenced in central/eastern French Pyrenees sub-marine polygenic breccias (Comus/Baixas Breccias), assigned to Upper Danian-Lower Selandian (P1c-P3) by means of planktonic foraminifera found either within their matrix, or within associated microrhythmic hemipelagites. These ante-Upper Eocene breccias, which are posterior to the HT-LP « Pyrenean » metamorphism (Mid.-Cretaceous in age and characterized by dipyre-bearing marbles and hornfelses) and to the Upper to Uppermost Cretaceous foldings, are only restricted to the Cretaceous orogenic axis of the range [Internal Metamorphic Zone (IMZ) and North-Pyrenean Zone (NPZ)]. They are dated in about 20 layers known from Mediterranean coast to Garonne valley. The breccias define in this part of Pyrenees a wide and long (more than 200 km) W-E trough (subdivided into several meridian palaeocanyons) inherited from former karstic topographies and separated by mountains with a steep topography, flanked to the South and the North of continental areas (covered by « Vitrollian » fluvio-lacustrine deposits). It was important to evidence if this marine breccia-filled « trough », Palaeocene in age, could extend westwards, West of Garonne, in Comminges/Barousse and Bigorre, where, laterally, the « Vitrollian » continental areas are replaced by outer-shelf marine sediments (clinoform carbonates), both covering the Sub-Pyrenean Zone (SPZ) and the High Primary Range (HPR) (Gavarnie-Mont-Perdu thrust sheet). In fact, the presence of those breccias has been already suggested (but without micropalaeontologic arguments) by Mattauer [in Choukroune, 1969 and 1976] in the Lourdes area (Bigorre). The topic of this paper is to characterize and to assign to the lower part of Palaeocene (63-59 Ma interval) several significant outcrops (St-Béat, Bramevaque/Troubat/Gembrié, Lortet, Medous/Bagnères-de-Bigorre and Lourdes/Pibeste) of these marine breccias (some of them previously used as black/yellow marbles called « Brèche romaine de St-Béat », « Portor des Pyrénées » or « Marbres de Medous ») recently identified from Garonne to Gave-de-Pau (fig. 1). Although quite poor in argillaceous hemipelagites, most of the breccias (which contain Mesozoic clasts) are now well dated by sections of « globigerinids » (= superfamily of Globerinacea) observed within their matrix. Other marine Palaeocene breccias also exist, more to the South (col de Gembre) along segments of the North-Pyrenean Fault, but they only rework Palaeozoic clasts. The « globigerinid » assemblage checked within all the Palaeocene breccias of Comminges/Bigorre includes, as more to the east, the following taxa: Globanomalina compressa, Gl. ehrenbergi, Gl. imitata, Parasubbotina varianta, P. variospira, Igorina pusilla, Morozovella angulata, M. praeangulata, Praemurica spiralis, Pr. inconstans and Woodringina hornestownensis. This assemblage is also laterally present within the marine carbonate sequences of the SPZ – HCR cover (« Lasseube Limestones » from the Nay/Pont Labau area, « Globigerinid-bearing Limestones » from the Gavarnie-Mont-Perdu thrust sheet), regions which are peripheric to the Pyrenean Lower/Mid. Cretaceous orogen (IMZ, NPZ) because exempt of major angular unconformity between Maastrichtian and Danian marine deposits (only a short gap of Lower/Lowermost Danian underlines the K/T boundary). On the contrary, the herein studied regions, belonging to this orogen, are characterized by a clear unconformity (both angular and cartographic) along a well-marked ravining surface inherited from erosional processes and karstification. The substratum of these breccias is strongly folded, cleaved and sometimes metamorphic and its younger formation seems to be Mid.– Cretaceous in age at least. Thus, it is very probable that the ante-Palaeocene unconformity seals compressional/transpressional structures (followed by emersions) assigned to the Uppermost Cretaceous phase (palinspastic transect, fig. 5). Danian/Selandian marine breccias and their already folded Mesozoic substratum are later tectonically reactived together by the « Pyrenean » compressions, Upper Eocene in age. If the elements of these breccias sometimes correspond to marbles induced by the Mid.-Cretaceous thermometamorphism (as around the famous « Etang de Lherz », more to the East, where lherzolites are also reworked in similar Danian/Selandian breccias), their matrix locally contain neogenic phyllites (never dipyre !) which could be related to a light (hydrothermal ?) post-breccia metamorphism. The clasts are generally angular, showing a very short transport from emerged steep topographies separating the different elementary canyons of the trough. The last problem is to determine the eventual westwards extension in the Bearn and Basque Pyrenees (fig. 6), particularly in the « Chaînons Béarnais » Zone which belonged to the North-Iberian palaeomargin (Iberian Plate) of the future range during Lower/Mid.-Cretaceous times. At this first level of micropalaeontologic investigations, it seems that several breccias (Lauriolle, Etchebar, Bosmendiette etc …), previously interpreted by several authors (synthesis in James and Canerot [1999]) as Aptian and « diapiric » (collapse) breccias, should be assigned to marine Palaeocene deposits because containing (in their matrix and associated hemipelagites) Danian-Selandian planktonic foraminifera similar to the Comminges/Bigorre ones.



2006 ◽  
Vol 177 (5) ◽  
pp. 267-282 ◽  
Author(s):  
Ana Crespo-Blanc ◽  
Dominique Frizon de Lamotte

Abstract The Betics and Rif cordillera constitute the northern and southern segments of the Gibraltar arc. Two different fold-and-thrust belts, deriving from the South Iberian and Maghrebian paleomargins respectively, developed in front of this orogenic system. By contrast, the Flysch Trough units and the overlying Alboran crustal domain (internal zones), which are situated in the uppermost part of the orogenic wedge, are common to both branches of the arc. The Flyschs Trough units constitute an inactive accretionary prism, derived from a deep elongated trough. From three large-scale profiles and some lithostratigraphic features of the involved sedimentary sequences, the Betic and Rif external domains are compared, mainly from a structural point of view. Although they are generally considered to show major similarities, the Betic and Rif external domains are in fact strikingly different, mainly concerning the structural style, deformation timing and metamorphism: a) the thick-skinned structure in the External Rif domain vs thin-skinned in the Subbetic domain; b) the pre-Oligocene and Miocene stacking in the External Rif domain vs the exclusively Miocene one in the Subbetic domain, and c) the metamorphism present only in part of the External Rif domain (low-grade greenschists facies). By contrast, it was not possible to establish any difference in structural style and deformation timing between the Flysch units outcropping in both branches of the Gibraltar arc.



2018 ◽  
Vol 58 (1) ◽  
pp. 190
Author(s):  
Francois Bache ◽  
Paul Walshe ◽  
Juergen Gusterhuber ◽  
Sandra Menpes ◽  
Mattilda Sheridan ◽  
...  

The Neoproterozoic to Late Paleozoic-aged Amadeus Basin is a large (~170 000 km2) east–west-trending basin, bounded to the south by the Musgrave Province and to the north by the Arunta Block of the Northern Territory. Commercial oil and gas production is established in the northern part of the basin but the southern part is still a frontier exploration area. Vintage and new seismic reflection data have been used with well data along the south-eastern Amadeus Basin to construct a new structural and depositional model. Three major phases of deformation controlling deposition have been identified. The first phase is characterised by a SW–NE trending structural fabric and is thought to be older than the deposition of the first sediments identified above basement (Heavitree and Bitter Springs formations). The second phase corresponds to the Petermann Orogeny (580–540 Ma) and trends in a NW–SE orientation. The third phase is the Alice Springs Orogeny (450–300 Ma) and is oriented W–E to WNW–ESE in this part of the basin. This tectono-stratigraphic model involving three distinct phases of deformation potentially explains several critical observations: the lack of Heavitree reservoir at Mt Kitty-1, limited salt movements before the Petermann Orogeny (~300 Ma after its deposition) and salt-involved structures that can be either capped by the Petermann Unconformity and overlying Cambrian to Devonian sediments, or can reach the present day surface. Finally, this model, along with availability of good quality seismic data, opens new perspectives for the hydrocarbon exploration of the Amadeus Basin. Each of the tectonic phases impacts the primary petroleum system and underpins play-based exploration.



2014 ◽  
Vol 2 (4) ◽  
pp. SM29-SM38 ◽  
Author(s):  
Simon A. Stewart

“Triangle zone” geometry is well established in thrust tectonics, where the leading edge of a frontal thrust branches backward onto a hinterland-directed roof thrust, and the triangle zone thus formed defines the thrust system’s leading edge. Similar geometries occur in extension and inversion settings, where a triangle zone can form between a deep-seated master fault and a roof fault or backthrust located in a hanging-wall detachment. In basement-controlled extension, triangle zone development can occur when the shear strength of the master fault plane in the zone above a hanging-wall detachment cutoff exceeds that of a new or reactivated antithetic fault detaching on the hanging-wall dip slope. This structural style is characterized by pronounced hanging-wall synclines linked to detached extensional faults higher up the hanging-wall dip slopes. The same principles apply during early phases of inversion tectonics. The part of the master fault that is above the hanging-wall detachment cutoff may constitute a buttress that causes displacement to backthrust along any available detachment into accommodation structures such as emergent ramps. This structural style is characterized by compressional structures within the graben while there is minor or even no sign of inversion on the graben margin faults. These geometries could be accounted for by other processes, for example, localized deep-seated fault-controlled structures within graben, or salt redistribution. However, fieldwork and analog models demonstrate the admissibility of triangle zone kinematics across a range of tectonic settings in the presence of detachment layers that are thin relative to the overall stratigraphy — typically tens to hundreds of meters in thickness. These models can guide seismic interpretation of unusual fold structures in extensional and inverted graben. Seismic interpretation examples were evaluated from the North Sea and Saudi Arabia.



1962 ◽  
Vol S7-IV (6) ◽  
pp. 857-866
Author(s):  
J. Paquet

Abstract The Sierra Espuna massif of Murcia is composed of tectonic units of which only the upper four were studied. In the south, the Morron de Totana unit exhibits a series of beds almost continuous from the Permo-Triassic to the upper Eocene-lower Oligocene. It is overlapped to the northeast by the Prat Mayor unit, characterized by middle Cretaceous glauconites, upper Cretaceous limestone with Microcodium beds, and lagoonal to continental Paleogene deposits. Overlapping the Prat Mayor is the Perona unit, characterized by Pliensbachian (lower Liassic) marl-sandstone and ferruginous rocks. The El Bosque unit covers the others and is thought to have a more southerly origin than the preceding three. These units have been previously included in a single structural complex.



Lithosphere ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 868-883 ◽  
Author(s):  
Y. Levy ◽  
T.K. Rockwell ◽  
J.H. Shaw ◽  
A. Plesch ◽  
N.W. Driscoll ◽  
...  

Abstract Active fold-and-thrust belts can potentially accommodate large-magnitude earthquakes, so understanding the structure in such regions has both societal and scientific importance. Recent studies have provided evidence for large earthquakes in the Western Transverse Ranges of California, USA. However, the diverse set of conflicting structural models for this region highlights the lack of understanding of the subsurface geometry of faults. A more robust structural model is required to assess the seismic hazard of the Western Transverse Ranges. Toward this goal, we developed a forward structural model using Trishear in MOVE® to match the first-order structure of the Western Transverse Ranges, as inferred from surface geology, subsurface well control, and seismic stratigraphy. We incorporated the full range of geologic observations, including vertical motions from uplifted fluvial and marine terraces, as constraints on our kinematic forward modeling. Using fault-related folding methods, we predicted the geometry and sense of slip of the major faults at depth, and we used these structures to model the evolution of the Western Transverse Ranges since the late Pliocene. The model predictions are in good agreement with the observed geology. Our results suggest that the Western Transverse Ranges comprises a southward-verging imbricate thrust system, with the dominant faults dipping as a ramp to the north and steepening as they shoal from ∼16°–30° at depth to ∼45°–60° near the surface. We estimate ∼21 km of total shortening since the Pliocene in the eastern part of the region, and a decrease of total shortening west of Santa Barbara down to 7 km near Point Conception. The potential surface area of the inferred deep thrust ramp is up to 6000 km2, which is of sufficient size to host the large earthquakes inferred from paleoseismic studies in this region.



1890 ◽  
Vol 7 (9) ◽  
pp. 403-409 ◽  
Author(s):  
A. Irving

Few students of Geology can doubt that the elevation of the Weald has been the most important factor concerned in determining the present surface-geology of the south-east of England. It has been constantly before my own mind in all my studies of Tertiary Geology for the last ten years, as the problem to the solution of which many other preliminary questions required answers. In my first paper on Tertiary Geology, read before the Geologists' Association in 1883, I pointed out that the presence of Eocene pebble-beds in the Woolwich and Reading series and in the Bagshot series afforded strong evidence of the encroachment of the sea upon the Upper Chalk in Eocene times. This conclusion is accepted by our greatest authority on Tertiary Geology, Prof. Prestwicb. The fact alone furnishes a strong presumption that the elevation of the Weald had commenced before the close of the Eocene period; while the many outliers of the Woolwich and Reading beds at high altitudes on the N. Downs, taken along with the general absence of the London Clay there, seems to tell us that the initial elevation of the Weald hill-range had gone far enough for this to form a shore to the area of deposition of the London Clay. I have shown further, in a former volume of the Geol. Mag., that, though there is no absolute proof, there are grounds for believing, that certain outliers of sands on the N. Downs (at Chipstead, Headley, and north of Netley Heath) are more likely to turn out to be of Upper Eocene age, than of any age to which they had been hitherto assigned by different writers.



2017 ◽  
Vol 5 (1) ◽  
pp. SD39-SD54 ◽  
Author(s):  
Eloi Carola ◽  
Oriol Ferrer ◽  
Oskar Vidal-Royo ◽  
Josep Anton Muñoz

Southern Pyrenean frontal thrusts are usually blind or partially covered by syn- and post-tectonic sediments of the Ebro Foreland hampering their interpretation. We have investigated the geometry and evolution of the Súria Anticline, a frontal structure of the Southern Pyrenees, which is characterized by the presence of multiple buried and blind thrusts displaying a complex triangle zone and several fishtail structures at depth. To characterize the geometry and structural evolution, a combination of surface geology, subsurface data interpretation, and analog modeling have been integrated into a unique 3D geologic model. The surface geology of this area depicts a rather simple structure, characterized by a north-directed backthrust and a gentle anticline, both striking west–southwest/east–northeast. In contrast, geophysical data indicate that the subsurface structure is more complex, exhibiting several northward- and southward-directed thrusts and folds detaching on the Pyrenean foreland Eocene evaporites. Integration of surface (geologic maps and dip measurements) and subsurface data (seismic and wells) allowed us to reconstruct the 3D structure of this area. To produce a more robust kinematic model, we used an experimental approach to investigate the evolution of frontal structures in folds and thrust belts on evaporitic detachments. Different viscous layer configurations were tested in a series of sandbox models comparing them with the evolution of the Súria Anticline. Taking into account the deformation and that seismic quality is in general poor, the experimental results allow us to better characterize the structures developed in this area. Our structural evolution is characterized by an early stage of salt inflation and fold nucleation. With increasing shortening, the structure evolved to a detachment anticline eventually developing a northward-directed thrust that broke through the northern anticline limb. The present-day geometry developed in a later stage of fold reactivation, when a new regional fold formed, and tightened the preexisting structure.



Sign in / Sign up

Export Citation Format

Share Document