Strain-partitioning and mechanics of deformation during oblique indentation: Inferences from the SE external Dinarides post- middle Miocene evolution

2021 ◽  
Author(s):  
Nil Feliu ◽  
Vedad Demir ◽  
Liviu Matenco ◽  
Milica Mrdak ◽  
Slobodan Radusinović ◽  
...  
Keyword(s):  
Middle Miocene ◽  
Tectonic Setting ◽  
Strike Slip ◽  
Plate Boundaries ◽  
Strain Partitioning ◽  
Tectonic Events ◽  
Kinematic Analyses ◽  
Thrust Sheets ◽  
Partitioning Pattern ◽  
External Dinarides

<p>Late-stage orogenic evolution often leads to multiple segmented slab systems, where the relative motion along oblique plate boundaries partitions the crustal strain into strike-slip and reverse faulting. The strain partitioning patterns and mechanics of deformation are thought to be closely related to the rheology inherited from previous tectonic events that affected various orogenic areas. The SE External Dinarides is one place to study such strain partitioning in a less understood tectonic setting. The Dinarides orogenic build-up is characterised by top SW thrusting during Late Cretaceous to Oligocene times. Subsequently, the N to NE indentation of the Adria microplate took place in this area after an early - middle Miocene period of generalized extension and was characterised by N-S to NNE-SSW oriented contraction, which is oblique to the inherited NW-SE oriented structural grain. We have studied the interplay between various structures creating strain partitioning during the Adria indentation in a SE External Dinarides region situated between the Trebinje city in SE Bosnia and Herzegovina and the Tivat city of SW Montenegro.</p><p>The post- middle Miocene orogenic evolution is characterised by regional NNW-SSE to N-S dextral strike-slip faulting associated with strain partitioning by the reactivation of NW-SE inherited rheological weak zones (former thrusts, nappe contacts or rheologically weak sediments). Kinematic analyses along individual structures define the strain partitioning pattern by a number of fault groups. The kinematically constrained mechanics of deformation (correlated to strain partition groups) in focus areas depict a gradual SE-ward transfer of deformation in the external thrust sheets of Montenegro. Such migration of deformation is done by an interplay between strike-slip, high-angle reverse faults and thrusts, which are locally associated with moderate block rotations (CW and CCW). The overall analysis demonstrates that oblique motions in advanced orogenic stages do not constrain a single paleostress field, and therefore they should be analysed by an improved kinematic approach aimed to understand strain partitioning and their effects superposed over an inherited structural grain.</p>

Neotectonics and large-scale geomorphology of Canada

1993 ◽  
Vol 17 (2) ◽  
pp. 248-264 ◽  
Author(s):  
John Adams ◽  
John J. Clague
Keyword(s):  
Large Scale ◽  
Late Quaternary ◽  
Strike Slip ◽  
Laurentide Ice Sheet ◽  
Continental Margins ◽  
Plate Boundaries ◽  
The West ◽  
Late Mesozoic ◽  
Tectonic Events ◽  
Mountain Systems

Canada includes active convergent and strike-slip plate boundaries, several major mountain systems, two passive continental margins, and a stable craton. Neotectonic activity, as indicated by earthquake occurrence, is highest along the west coast and lowest in the interior of the country. Correlations between tectonics and physiography are strongest in the west. Here, the landscape bears a strong imprint of convergent and strike-slip plate regimes. Late Mesozoic and early Cenozoic tectonic events established the setting in which the present physiography of western Canada developed, but the landscape acquired its present form much more recently, in Pliocene and Quaternary time. In contrast, the neotectonic imprint in eastern and northern Canada is enigmatic, and although major concentrations of earthquakes in many areas are associated with reactivated, early Phanerozoic structures, there has been only limited late Quaternary faulting. The vast Canadian craton, despite its very low seismicity, is deforming isostatically at a moderate rate due to melting of the Laurentide Ice Sheet thousands of years ago.

The 25 October, 2018 Zakynthos (Greece) earthquake: seismic activity at the transition between a transform fault and a subduction zone.

2020 ◽  
Author(s):  
P Papadimitriou ◽  
V Kapetanidis ◽  
A Karakonstantis ◽  
I Spingos ◽  
K Pavlou ◽  
...  
Keyword(s):  
Spatial Clustering ◽  
Accretionary Prism ◽  
Velocity Model ◽  
Strike Slip ◽  
Double Difference ◽  
Strain Partitioning ◽  
Transform Fault ◽  
Fault Plane Solutions ◽  
The North ◽  
Waveform Modelling

Summary The properties of the Mw = 6.7 earthquake that took place on 25 October 2018, 22:54:51 UTC, ∼50 km SW of the Zakynthos Island, Greece, are thoroughly examined. The main rupture occurred on a dextral strike-slip, low-angle, east-dipping fault at a depth of 12 km, as determined by teleseismic waveform modelling. Over 4000 aftershocks were manually analysed for a period of 158 days. The events were initially located with an optimal 1D velocity model and then relocated with the double-difference method to reveal details of their spatial distribution. The latter spreads in an area spanning 80 km NNW-SSE and ∼55 km WSW-ENE. Certain parts of the aftershock zone present strong spatial clustering, mainly to the north, close to Zakynthos Island, and at the southernmost edge of the sequence. Focal mechanisms were determined for 61 significant aftershocks using regional waveform modelling. The results revealed characteristics similar to the mainshock, with few aftershocks exhibiting strike-slip faulting at steeper dip angles, possibly related to splay faults on the accretionary prism. The slip vectors that correspond to the east-dipping planes are compatible with the long-term plate convergence and with the direction of coseismic displacement on the Zakynthos Island. Fault-plane solutions in the broader study area were inverted for the determination of the regional stress-field. The results revealed a nearly horizontal, SW-NE to E-W-trending S1 and a more variable S3 axis, favouring transpressional tectonics. Spatial clusters at the northern and southern ends of the aftershock zone coincide with the SW extension of sub-vertical along-dip faults of the segmented subducting slab. The mainshock occurred in an area where strike-slip tectonics, related to the Cephalonia Transform Fault and the NW Peloponnese region, gradually converts into reverse faulting at the western edge of the Hellenic subduction. Plausible scenarios for the 2018 Zakynthos earthquake sequence include a rupture on the subduction interface, provided the slab is tilted eastwards in that area, or the reactivation of an older east-dipping thrust as a low-angle strike-slip fault that contributes to strain partitioning.

Structural analysis of Bic fault, a thrust-related strike-slip fault of the external domain of the Taconic Orogen, Appalachians, Quebec, and metallogenic implications

1991 ◽  
Vol 28 (5) ◽  
pp. 788-799 ◽  
Author(s):  
P. Rhéaume ◽  
K. Schrijver
Keyword(s):  
Strike Slip ◽  
Strike Slip Fault ◽  
Thrust Sheet ◽  
Kink Bands ◽  
Strain Ellipsoid ◽  
Adjacent Part ◽  
External Domain ◽  
Dextral Strike Slip Fault ◽  
Thrust Sheets ◽  
Stage 1

The Bic fault is exposed along the shoreline of the St. Lawrence River, 21 km southwest of Rimouski, for 210 m at Cap à l'Orignal and for 100 m at Cap Enragé. The fault brings in contact two major thrust sheets, the Des Seigneuries and the Des Iles, Cambrian lithologies of the former overlying Ordovician rocks of the latter. In the Taconic Orogen, such contacts are normally thrust faults, but the Bic fault is a dextral strike-slip fault, striking east–west and dipping southward. A study of a narrow zone straddling the fault and an adjacent part of the Des Seigneuries thrust sheet has led to the recognition of four successive stages of deformation, all compatible with a northeast–southwest-trending strain ellipsoid. The two first stages are most important: stage 1 brought about regional folding and faulting, whereas stage 2 was characterized by the development of various structural elements (C–S fabrics, stretching lineation, Riedel shears, and kink bands) exclusive to the fault zone. We infer that (i) in the study area, the Bic fault constituted a lateral ramp along which the Des Seigneuries thrust sheet slid horizontally westward; and (ii) emplacement of Ba–Pb–Zn deposits took place slightly after this movement, probably during regional uplift of the orogen in Late Ordovician to Early Silurian time. The latter hypothesis tends to be corroborated by model lead ages of galena in two deposits.

scholarly journals Alternating asymmetric topography of the Alaska range along the strike-slip Denali fault: Strain partitioning and lithospheric control across a terrane suture zone

Tectonics ◽  
2014 ◽  
Vol 33 (8) ◽  
pp. 1519-1533 ◽  
Author(s):  
Paul G. Fitzgerald ◽  
Sarah M. Roeske ◽  
Jeffery A. Benowitz ◽  
Steven J. Riccio ◽  
Stephanie E. Perry ◽  
...  
Keyword(s):  
Strike Slip ◽  
Suture Zone ◽  
Strain Partitioning ◽  
Alaska Range ◽  
Denali Fault

scholarly journals GEODYNAMICS AND MAGMATISM OF THE PACIFIC-TYPE TRANSFORM MARGINS. ASPECTS AND DISCRIMINANT DIAGRAMS

2021 ◽  
pp. 3-24
Author(s):  
A.V. Grebennikov ◽  
◽  
A.I. Khanchuk ◽  
Keyword(s):  
Continental Margin ◽  
Tectonic Setting ◽  
Island Arc ◽  
Igneous Rocks ◽  
High Alumina ◽  
Plate Boundaries ◽  
Spreading Ridge ◽  
Convergent Margins ◽  
Oceanic Plate ◽  
Plate Movement

Transform margins represent lithospheric plate boundaries with horizontal sliding of oceanic plate, which in time and space replaced the subduction related convergent margins. This happened due to: spreading ridge–trench intersection (California; Queen Charlotte–Northern Cordilleran, West of the Antarctic Peninsula, and probably the Late Miocene–Pleistocene Southernmost South America) or ridge death along continental margin (Baja California); change in the direction of oceanic plate movement (Western Aleutian–Komandorsk; Southernmost tip of the Andes); and island arc-continent collision (New Guinea Island). Post-subduction magmatism is related to a slab window that resulted either from the spreading ridge collision (subduction) with a continental margin or slab tear formation, or slab break-off after subduction cessation due to other reasons. Igneous magmatic series formed in consequence of these events show diversity of tholeiitic (sub-alkaline), alkaline or calc-alkaline, high-alumina and adakitic rocks. The comprehensive geochemical dataset (more than 2400 analyses) on igneous rocks of the model transform and convergent geodynamic settings allowed to substantiate the most informative triple diagrams for the petrogenic oxides TiO2 × 10 – Fe2O3Tot – MgO and trace elements Nb – La– Yb. Mostly approved for the rock compositions with SiO2 < 63 wt. %, the new plots are capable of distinguishing igneous rocks formed above zones of subduction at an island arc and continental margin (related to convergent margins), from those formed in the tectonic setting of transform margins along continents or island arcs.

scholarly journals Evolution of the Yangtze River network, southeastern Tibet: Insights from thermochronology and sedimentology

Lithosphere ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 3-18
Author(s):  
Loraine Gourbet ◽  
Rong Yang ◽  
Maria Giuditta Fellin ◽  
Jean-Louis Paquette ◽  
Sean D. Willett ◽  
...  
Keyword(s):  
Tibetan Plateau ◽  
Yangtze River ◽  
Middle Miocene ◽  
Strike Slip ◽  
The Tibetan Plateau ◽  
Fluvial Incision ◽  
Upper Yangtze River ◽  
Southeastern Margin ◽  
The Upper Yangtze River ◽  
Southeastern Tibet

Abstract We performed apatite and zircon (U-Th)/He dating on a granitic pluton that has been offset by ∼10 km by motion on the sinistral strike-slip Xiangcheng fault in SW Sichuan, SE Tibetan plateau, where the Shuoqu River incises a deep valley before joining the upper Yangtze River. Mean ZHe cooling ages range from 49.5 ± 2.2 Ma to 68.6 ± 6.0 Ma. Samples located above 3870 m yield mean apatite (U-Th)/He ages ranging from 30.6 ± 1.4 Ma to 40.6 ± 2.7 Ma, whereas samples at lower elevations range from 9.8 ± 1.3 Ma to 14.6 ± 2.7 Ma. In the same region, Cenozoic continental sediments are exposed on the flanks of deep valleys. They consist of unsorted conglomerates and sandstones that partly fill a paleotopography. The sediments were deposited during an episode of rapid sedimentation, followed by incision that varies between 0.5 and 1.2 km. Thermal and exhumational modeling of the granite thermochronometric data indicates rapid cooling during the middle Miocene that was likely related to fluvial incision. Our findings suggest that the upper Yangtze River and its tributary (Shuoqu) were connected by the middle Miocene. Our modeling also supports the idea that the exhumation pattern during the Cenozoic in the southeastern margin of the Tibetan Plateau is spatially and temporally heterogeneous.

Inherited discontinuities and Neogene structure: the Gulf of Suez and the northwestern edge of the Red Sea

1986 ◽  
Vol 317 (1539) ◽  
pp. 129-139 ◽  
Keyword(s):  
Red Sea ◽  
Strike Slip ◽  
Stress System ◽  
Gulf Of Suez ◽  
Vertical Movements ◽  
Tectonic Events ◽  
Zigzag Pattern ◽  
Vertical Displacements ◽  
Intracontinental Deformation ◽  
Extensional Model

The Gulf of Suez and the northern Red Sea rifts are the result of intracontinental deformation during Neogene times. The initiation and the development of the rift are controlled by (i) four main trends of faults: N140°-N150°; NS to N 20°; sub E -W ; and N40°-60°; (ii) a zigzag faulting pattern; (iii) two main tectonic events. The first is characterized by strike-slip displacements inducing the formation of antithetic tilted blocks. The geometry of the blocks changes according to their orientation. Complex structures can result from the com bination of several trends. Vertical movements are weak. The second is characterized by synthetic normal movements forming a horst and graben pattern. Vertical displacements are important and induce the generation of the axial trough and uplift of the shoulders of the rift. The zigzag pattern of the faults that govern the Rift and the initial strike-slip displacements cannot result from a simple extensional model but imply a reactivation of inherited discontinuities in the Miocene stress system induced by the northern convergent boundaries of the African and Arabic plates. The major trends of faults that control the Neogene structure have been active in this area since Palaeozoic or even Proterozoic times.

East-directed imbrication and oblique-slip faulting in the Humber Arm Allochthon of western Newfoundland: structural and tectonic significance

1985 ◽  
Vol 22 (9) ◽  
pp. 1351-1360 ◽  
Author(s):  
William Bosworth
Keyword(s):  
Structural Features ◽  
Strike Slip ◽  
Thrust Faults ◽  
High Angle ◽  
Structural Geometry ◽  
Tectonic Significance ◽  
Thrust Sheets ◽  
Internal Deformation ◽  
Fold Formation ◽  
Slip Motion

Many of the dominant outcrop-scale structural features in the lower, clastic thrust sheets of the Humber Arm Allochthon were not generated during the westerly emplacement of the allochthonous terranes of western Newfoundland. Two general groups of structures are abundant in the Humber Arm rocks: (1) east-verging folds accompanied by a weakly to moderately developed slaty cleavage and cut by west-dipping thrust faults; and (2) northeast–southwest-striking high-angle faults, with predominantly normal oblique-slip motion and with larger faults down-stepping to the northwest. Evidence of the earlier, west-directed thrusting (refolded and downward-facing folds, folded thrusts, etc.) is uncommon in the Humber Arm area. Slaty cleavage-generation structures, however, appear to overprint the phacoidal fabrics of the mélange zones that exist between and within thrust slices of the allochthon, making the mélange fabrics the most readily identified features associated with the initial east over west imbrication and emplacement of the allochthon.These observations suggest that the original detachment of the rocks of the Humber Arm Supergroup from their basement (early Taconian deformation) occurred with only limited internal deformation. Mélange zones presently define some or all of the early surfaces of movement. The fully assembled and emplaced allochthonous terrane was subsequently reimbricated on a smaller scale through east-directed thrusting, at which time the allochthon was more pervasively deformed (regional slaty cleavage and fold formation). This may represent late Taconian back thrusting or Acadian shortening. The youngest deformation of the Humber Arm region appears to have been a regional extensional event, with a significant northeast–southwest strike-slip component of movement. This may correlate with the development of Carboniferous strike-slip basins in the present Gulf of St. Lawrence and western Newfoundland. Much of the present structural geometry in the Humber Arm region, including the contacts between ophiolitic and clastic thrust sheets, may have originated during these later two deformational sequences, rather than as a consequence of the initial emplacement history.

Kinematic reconstructions of the Western Mediterranean area since Triassic time: possible scenarios and their implications for the Apennines

2020 ◽  
Author(s):  
Eline Le Breton
Keyword(s):  
Tectonic Evolution ◽  
Driving Forces ◽  
Tectonic Setting ◽  
Mediterranean Area ◽  
Magnetic Anomalies ◽  
Western Mediterranean ◽  
Plate Boundaries ◽  
The Past ◽  
The North ◽  
Kinematic Evolution

&lt;p&gt;The Western Mediterranean-Alpine belt is remarkable for its tectonic complexity, i.e. strong arcuation of plate boundaries, fast trench retreat, upper-plate extension and switch of subduction/collision polarity around the Adriatic plate (Adria). The kinematic evolution of the Western Mediterranean area is enigmatic due to the intermittently motion of small continental plates (Adria, Iberia and Sardinia-Corsica) that are caught between two major plates (Africa and Europe), converging since Cretaceous time. Reconstructing the past motion of these micro-plates is challenging due to the strong deformation of their boundaries but is key to understand the geodynamic evolution of the whole area.&lt;/p&gt;&lt;p&gt;The Neogene tectonic evolution is well constrained using magnetic anomalies and transform zones in the Atlantic Ocean for the motion of Europe, Iberia and Africa, and by reconstructing the amount of convergence along fold-and-thrust belts (Apennines, Alps, Dinarides, Provence) and coeval divergence along extensional basins (Liguro-Provencal and Tyrrhenian basins, Sicily Channel Rift Zone) for the motion of Adria and Sardinia-Corsica. Those reconstructions show that Adria had a slight independent motion from Africa and rotated counter-clockwise of about 5&amp;#186; relative to Europe since 20 Ma. However, uncertainties increase and debates arise as one goes back in time. The main debates concern the past motion of Iberia and where its motion relative to Europe is being accommodated in Mesozoic time. Different kinematic scenarios have been proposed depending on the interpretation of paleomagnetic dataset of Iberia, magnetic anomalies in the North Atlantic, and geological-geophysical record of deformation in the Pyrenees and between Iberia and Sardinia-Corsica. Those scenarios have different implications for the tectonic evolution of the Apennines, especially for the Permian-Triassic paleo-tectonic setting of Sardinia, Calabria and Adria, and for the extent and timing of closure of the Liguro-Piemont Ocean. It is important to discuss those implications to better understand subduction processes in the Apennines and their driving forces.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document