scholarly journals A LiDAR application for the study of taxiway surface evenness and slope

2014 ◽  
Vol II-5 ◽  
pp. 65-72 ◽  
Author(s):  
M. Barbarella ◽  
M. R. De Blasiis ◽  
M. Fiani ◽  
M. Santoni
Keyword(s):  
High Speed ◽  
Laser Scanning ◽  
Survey Method ◽  
Surface Model ◽  
Static Mode ◽  
Use Of Time ◽  
Pavement Roughness ◽  
Topographic Survey ◽  
Isolated Points ◽  
Very High

Pavement roughness evaluation of airport runways/taxiways and scheduling of maintenance operations should be done according to well-defined procedures. Survey of geometric features of airport pavements is performed to verify the flow of water from the surface and to assure a level of roughness that allows the airplane to maneuver in the safest and most comfortable conditions. <br><br> In particular the evaluation of longitudinal and transversal evenness of the runway and taxiway is carried out through topographic survey. The tachymetric survey has been carried out according to traditional topographic technique, which allows the evaluation of geometric position of isolated points with very high accuracy, but it is not very productive. Moreover it returns the pavement surface model through only few measured points. An alternative survey method, characterized by a good accuracy, high speed of acquisition and very high surveyed point density, is Terrestrial Laser Scanning (TLS), in static mode. In this paper we describe our experience aimed to validate the use of time-of-flight (TOF) TLS, based on a survey on a 200 m length segment of an international airport taxiway. From the acquired data we extracted the parameters of interest, especially the slope, and compared them with the values obtained from the traditional topographic survey. We also developed a proprietary software package to evaluate the slope and to analyze the statistical data. The software allows users to manage the flow of a semi-automatic calculation.

scholarly journals Process Evaluation for Smart Concrete Road Construction:Road Surface and Thickness Evaluation Using High-Speed LiDAR Technology

Automation ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 31-47
Author(s):  
Patric Skalecki ◽  
Maximilian Sesselmann ◽  
Sabrina Rechkemmer ◽  
Thorsten Britz ◽  
Andreas Großmann ◽  
...  
Keyword(s):  
Layer Thickness ◽  
High Speed ◽  
Laser Scanning ◽  
Classical Method ◽  
Early Stage ◽  
Quality Criteria ◽  
Point Clouds ◽  
Base Layer ◽  
Surface Model ◽  
The Road

The enhancement of new quality criteria in highway construction is a key aspect to improving the construction process and lifetime of road. In particular, mobile laser scanning systems are nowadays able to provide realistic 3D elevation profiles of a road to detect anomalies. In this context, this study utilizes a high-accuracy high-speed mobile mapping vehicle and evaluates a weighted longitudinal profile as an improved measure for evenness analysis. For comparison a classical method with a rolling straight edge was evaluated on the same road section and observed effects are discussed. The second focus is the areal reconstruction of the road thickness. For this purpose, a modern method was developed to spatially synchronize two high-speed laser scans using reference boxes next to the road, to transfer the point clouds into a surface model and to calculate the layer thickness. This procedure was conceptually validated by some pointwise measurements of the layer thickness. With this information, imperfections in the base layer could be detected automatically over a wide area at an early stage and countermeasures might be initiated before constructing the highway.

Structural changes in silicon-on-insulator material during post-implantation annealing

1986 ◽  
Vol 44 ◽  
pp. 736-737
Author(s):  
C. O. Jung ◽  
S. J. Krause ◽  
S.R. Wilson
Keyword(s):  
Integrated Circuits ◽  
Oxide Layer ◽  
High Speed ◽  
Structural Changes ◽  
Device Fabrication ◽  
Silicon On Insulator ◽  
High Quality ◽  
Radiation Hardened ◽  
Post Implantation ◽  
Very High

Silicon-on-insulator (SOI) structures have excellent potential for future use in radiation hardened and high speed integrated circuits. For device fabrication in SOI material a high quality superficial Si layer above a buried oxide layer is required. Recently, Celler et al. reported that post-implantation annealing of oxygen implanted SOI at very high temperatures would eliminate virtually all defects and precipiates in the superficial Si layer. In this work we are reporting on the effect of three different post implantation annealing cycles on the structure of oxygen implanted SOI samples which were implanted under the same conditions.

Five-Dimensional Microscopy using Widefield-Deconvolution: Practical Considerations and Biological Applications

1996 ◽  
Vol 54 ◽  
pp. 268-269
Author(s):  
W.F. Marshall ◽  
K. Oegema ◽  
J. Nunnari ◽  
A.F. Straight ◽  
D.A. Agard ◽  
...  
Keyword(s):  
Confocal Microscopy ◽  
High Speed ◽  
Laser Scanning ◽  
Ccd Camera ◽  
Image Plane ◽  
Time Lapse ◽  
Laser Scanning Confocal Microscopy ◽  
Three Dimensions ◽  
Excitation Light ◽  
Cooled Ccd

The ability to image cells in three dimensions has brought about a revolution in biological microscopy, enabling many questions to be asked which would be inaccessible without this capability. There are currently two major methods of three dimensional microscopy: laser-scanning confocal microscopy and widefield-deconvolution microscopy. The method of widefield-deconvolution uses a cooled CCD to acquire images from a standard widefield microscope, and then computationally removes out of focus blur. Using such a scheme, it is easy to acquire time-lapse 3D images of living cells without killing them, and to do so for multiple wavelengths (using computer-controlled filter wheels). Thus, it is now not only feasible, but routine, to perform five dimensional microscopy (three spatial dimensions, plus time, plus wavelength).Widefield-deconvolution has several advantages over confocal microscopy. The two main advantages are high speed of acquisition (because there is no scanning, a single optical section is acquired at a time by using a cooled CCD camera) and the use of low excitation light levels Excitation intensity can be much lower than in a confocal microscope for three reasons: 1) longer exposures can be taken since the entire 512x512 image plane is acquired in parallel, so that dwell time is not an issue, 2) the higher quantum efficiently of a CCD detect over those typically used in confocal microscopy (although this is expected to change due to advances in confocal detector technology), and 3) because no pinhole is used to reject light, a much larger fraction of the emitted light is collected. Thus we can typically acquire images with thousands of photons per pixel using a mercury lamp, instead of a laser, for illumination. The use of low excitation light is critical for living samples, and also reduces bleaching. The high speed of widefield microscopy is also essential for time-lapse 3D microscopy, since one must acquire images quickly enough to resolve interesting events.

YSS HAP72

Alloy Digest ◽  
2019 ◽  
Vol 68 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Tool Steel ◽  
High Speed ◽  
High Wear Resistance ◽  
Bend Strength ◽  
Temperature Performance ◽  
Very High

Abstract YSS HAP72 is a powder metallurgy high-speed tool steel with a very high wear resistance. This datasheet provides information on composition, hardness, and bend strength. It also includes information on high temperature performance. Filing Code: TS-779. Producer or source: Hitachi Metals America Ltd.

Very High-Speed Report File System

1992 ◽  
Author(s):  
Timothy J. Salo ◽  
John D. Cavanaugh ◽  
Michael K. Spengler
Keyword(s):  
High Speed ◽  
File System ◽  
Very High
Sign in / Sign up

Export Citation Format

Share Document