Characterization of hydrochars produced by hydrothermal carbonization of rice husk

Abstract. Biochar is the carbon-rich product obtained when biomass, such as wood, manure or leaves, is heated in a closed container with little or no available air. In more technical terms, biochar is produced by so-called thermal decomposition of organic material under limited supply of oxygen (O2), and at relatively low temperatures (<700 °C). Hydrochar differentiates from biochar because it is produced in an aqueous environment, at lower temperatures and longer retention times. This work describes the production of hydrochar from rice husks using a simple, safe and environmentally-friendly experimental set-up, previously used for degradation of various wastewaters. Hydrochars were obtained at 200°C and 300°C and at residence times ranging from 2 to 16 h. All samples were then characterized in terms of yield, surface area, pH, conductivity and elemental analysis and two of them were selected for further testing with respect to heating values and heavy metal content.

Download Full-text

Characterization of hydrochars produced by hydrothermal carbonization of rice husk

Solid Earth ◽

10.5194/se-5-477-2014 ◽

2014 ◽

Vol 5 (1) ◽

pp. 477-483 ◽

Cited By ~ 72

Author(s):

D. Kalderis ◽

M. S. Kotti ◽

A. Méndez ◽

G. Gascó

Keyword(s):

Surface Area ◽

Hydrothermal Carbonization ◽

Aqueous Environment ◽

Residence Times ◽

Fixed Carbon ◽

Heating Value ◽

Carbon Recovery ◽

Set Up ◽

Technical Terms

Abstract. Biochar is the carbon-rich product obtained when biomass, such as wood, manure or leaves, is heated in a closed container with little or no available air. In more technical terms, biochar is produced by so-called thermal decomposition of organic material under limited supply of oxygen (O2), and at relatively low temperatures (< 700 °C). Hydrochar differentiates from biochar because it is produced in an aqueous environment, at lower temperatures and longer retention times. This work describes the production of hydrochar from rice husks using a simple, safe and environmentally friendly experimental set-up, previously used for degradation of various wastewaters. Hydrochars were obtained at 200 °C and 300 °C and at residence times ranging from 2 to 16 h. All samples were then characterized in terms of yield, surface area, pH, conductivity and elemental analysis, and two of them were selected for further testing with respect to heating values and heavy metal content. The surface area was low for all hydrochars, indicating that porous structure was not developed during treatment. The hydrochar obtained at 300 °C and 6 h residence times showed a predicted higher heating value of 17.8 MJ kg−1, a fixed carbon content of 46.5% and a fixed carbon recovery of 113%, indicating a promising behaviour as a fuel.

Download Full-text

Rapid, Refined, and Robust Method for Expression, Purification, and Characterization of Recombinant Human Amyloid-beta M1-42

10.26434/chemrxiv.7725002.v1 ◽

2019 ◽

Author(s):

Priya Prakash ◽

Travis Lantz ◽

Krupal P. Jethava ◽

Gaurav Chopra

Keyword(s):

Amyloid Beta ◽

Western Blots ◽

Force Microscopy ◽

E Coli ◽

Atomic Force ◽

Set Up ◽

Short Time

Amyloid plaques found in the brains of Alzheimer’s disease (AD) patients primarily consists of amyloid beta 1-42 (Ab42). Commercially, Ab42 is synthetized using peptide synthesizers. We describe a robust methodology for expression of recombinant human Ab(M1-42) in Rosetta(DE3)pLysS and BL21(DE3)pLysS competent E. coli with refined and rapid analytical purification techniques. The peptide is isolated and purified from the transformed cells using an optimized set-up for reverse-phase HPLC protocol, using commonly available C18 columns, yielding high amounts of peptide (~15-20 mg per 1 L culture) in a short time. The recombinant Ab(M1-42) forms characteristic aggregates similar to synthetic Ab42 aggregates as verified by western blots and atomic force microscopy to warrant future biological use. Our rapid, refined, and robust technique to purify human Ab(M1-42) can be used to synthesize chemical probes for several downstream in vitro and in vivo assays to facilitate AD research.

Download Full-text

Isolation and characterization of oleochemical compounds from watermelon seed

International Journal of Novel Trends in Pharmaceutical Sciences ◽

10.26452/ijntps.v10i4.1377 ◽

2020 ◽

Vol 10 (4) ◽

pp. 79-82

Author(s):

Madhubhushan M ◽

Seshaiah S ◽

Chandrudu J ◽

Sagar R ◽

Akila CR

Keyword(s):

Cutting Tool ◽

Citrullus Lanatus ◽

Fatty Esters ◽

Mineral Oils ◽

Light Yellow ◽

Isolation And Characterization ◽

The Common ◽

Set Up ◽

Natural Gradation

The common watermelon item (Citrullus lanatus) seeds were gained from castoffs verdant nourishments for use by decorating, sun ventilation and pulverizing. Light yellow-toned oil was gotten by dissolvable withdrawal using oil atmosphere and the going with traits were gotten using oil ether: pH, refractive rundown, thickness, dissolvable miscibility, coagulating temperature, fire nature, express gravity, streak point and warmth of consuming. With a shallow level of unsaturation, stepped level of smoothness, and proximity of raised degree of the sensible proportion of free unsaturated fats. The low assessment of the solidifying temperature of the oil offered a hint that the oil can be managed in various areas paying little heed to the qualification in temperature. The following level of linoleic destructive of the oil offers a hint of natural gradation of solidarity. Fatty esters are increasing expanding significance as a biodegradable swap for mineral oils. In some request regions, for example, cutting tool oil, gearbox, pressure-driven oils, and greases for raw petroleum creation, the oleochemical items are set up. Nonetheless, certain particular wellsprings of fatty esters are hitherto to be abused for this comparative reason. This exploration subsequently tests into one of the less used wellsprings of fatty esters in watermelon. The oil from the kernels demonstrations a top-notch yield presents significant utilitarian gatherings for change and thus was utilized to set up an assortment of oleochemicals which demonstrated excellence materials in contrast with the routinely utilized oils feed frameworks for oleochemicals after portrayal. The photopolymers acquired indicated piercing vinyl protons for consistent polymerize.

Download Full-text