scholarly journals Investigation of the Solidity Ratio in a Horizontal Wind Turbine

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Süleyman Tekşin ◽  
Mert Kurt
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Horizontal Wind ◽  
Speed Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Generator System ◽  
Wind Speeds ◽  
Solidity Ratio ◽  
Different Diameters ◽  
Work Done

A wind turbine-generator system; Parameters such as wind speed, turbine blade diameter, number of blades, turbine height, tip speed ratio and solidity ratio are affected. In this study, horizontal axis wind turbine with diameter of 130 cm and blade solidity ratio values of 7%, 8,6% and 9,8% were constructed and the tests were made according to different blade speed ratios. The required blades were obtained from PVC pipes of different diameters. The experimental study was actualized in Erciyes University Mechanical Engineering, Engines Laboratory. For each profile, blade rotational speeds and wind speeds at various distances have been studied. It has been determined that the wind speed is reduced by the distance difference and accordingly the number of blade speed is decreased visibly. In the wing profiles with different blade solidity ratios resulting from the work done, the wing structure with the solidity ratio of 8.6% gave the best performance. CL and CD coefficients of the profiled specimens were analyzed by FLUENTTM, a program of computational fluid dynamics. One of the factors that should be taken into consideration in the production of wind turbines is the blade solidity ratio.

scholarly journals PENGARUH KECEPATAN ANGIN DAN VARIASI JUMLAH SUDU TERHADAP UNJUK KERJA TURBIN ANGIN POROS HORIZONTAL

2013 ◽  
Vol 3 (1) ◽  
Author(s):  
Firman Aryanto ◽  
Made Mara ◽  
Made Nuarsa
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Mechanical Energy ◽  
Performance Testing ◽  
Horizontal Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Maximum Speed ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds

The wind turbine is a device that converts wind energy into mechanical energy and then converted into electrical energy through a generator. Horizontal axis wind turbines can increase the efficiency to get the maximum power coefficient. One was using the blade numerous. Maximum efisiensi system will increase the number of watts (power) generated so as to obtain a certain number of watts by simply using the number of windmills lessThe object of this research is the performance testing horizontal axis wind turbine with wind speed variation and variation in terms of the number of blade Efisiensi system (𝜂 )  and Tip Speed Ratio (TSR). Research conducted with the wind coming from the source to the Wind Tunnel fan to direct wind. Wind speed is used there are three variations of the 3 m/s, 3.5 m/s, and 4 m/s and varying the amount of blade that is 3, 4, 5 and 6 blade.The results showed that the best 𝜂  values obtained at a maximum wind speed of 4 m / s and the number of blade 5 with a value of 3.07% 𝜂, whereas 𝜂 smallest value obtained at wind speeds of 3 m/s and the number of blade 3 that the value of 0.05% 𝜂. For TSR maximum value at a maximum speed of 4 m/s occurred in the number of blade 5 is equal to λ = 2.11, while the lowest value at wind speeds of 3 m/s resulting in blade number 3 is equal to λ = 1.49.

Optimal Design of Horizontal Axis Wind Turbine Blades

2008 ◽  
Author(s):  
Ohad Gur ◽  
Aviv Rosen
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Design Method ◽  
Turbine Blades ◽  
Horizontal Axis ◽  
Optimization Strategy ◽  
Wind Turbine Blades ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Design Variables

The optimal aerodynamic design of Horizontal Axis Wind Turbine (HAWT) is investigated. The Blade-element/Momentum model is used for the aerodynamic analysis. In the first part of the paper a simple design method is derived, where the turbine blade is optimized for operation at a specific wind speed. Results of this simple optimization are presented and discussed. Besides being optimized for operation at a specific wind speed, without considering operation at other wind speeds, the simple model is also limited in the choice of design goals (cost functions), design variables and constraints. In the second part of the paper a comprehensive design method that is based on a mixed numerical optimization strategy, is presented. This method can handle almost any combination of: design goal, design variables, and constraints. Results of this method are presented, compared with the results of the simple optimization, and discussed.

scholarly journals Parametric study of a horizontal axis wind turbine with similar characteristics to those of the Villonaco wind power plant

2021 ◽  
Vol 2 (2) ◽  
pp. 51
Author(s):  
Santiago Sánchez ◽  
Victor Hidalgo ◽  
Martin Velasco ◽  
Diana Puga ◽  
P. Amparo López-Jiménez ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Energy Production ◽  
Electrical Energy ◽  
Horizontal Axis ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Electrical Energy Production ◽  
Python Programming ◽  
Selection Of

<p class="JAREAbstract">The present paper focuses on the selection of parameters that maximize electrical energy production of a horizontal axis wind turbine using Python programming language. The study takes as reference turbines of Villonaco wind field in Ecuador. For this aim, the Blade Element Momentum (BEM) theory was implemented, to define rotor geometry and power curve. Furthermore, wind speeds were analyzed using the Weibull probability distribution and the most probable speed was 10.50 m/s. The results were compared with mean annual energy production of a Villonaco’s wind turbine to validate the model. Turbine height, rated wind speed and rotor radius were the selected parameters to determine the influence in generated energy. Individual increment in rotor radius and rated wind speed cause a significant increase in energy produced. While the increment in turbine’s height reduces energy generated by 0.88%.</p>

scholarly journals Small Wind Turbine Blade Design and Optimization

Symmetry ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 18 ◽  
Author(s):  
Hani Muhsen ◽  
Wael Al-Kouz ◽  
Waqar Khan
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Optimization Process ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Design And Optimization ◽  
Low Wind Speed ◽  
Low Performance ◽  
Turbine Blade Design

This work aims at designing and optimizing the performance of a small Horizontal-Axis-Wind-Turbine to obtain a power coefficient (CP) higher than 40% at a low wind speed of 5 m/s. Two symmetric in shape airfoils were used to get the final optimized airfoil. The main objective is to optimize the blade parameters that influence the design of the blade since the small turbines are prone to show low performance due to the low Reynolds number as a result of the small size of the rotor and the low wind speed. Therefore, the optimization process will select different airfoils and extract their performance at the design conditions to find the best sections which form the optimal design of the blade. The sections of the blade in the final version mainly consist of two different sections belong to S1210 and S1223 airfoils. The optimization process goes further by investigating the performance of the final design, and it employs the blade element momentum theory to enhance the design. Finally, the rotor-design was obtained, which consists of three blades with a diameter of 4 m, a hub of 20 cm radius, a tip-speed ratio of 6.5 and can obtain about 650 W with a Power coefficient of 0.445 at a wind-speed of 5.5 m/s, reaching a power of 1.18 kW and a power coefficient of 0.40 at a wind-speed of 7 m/s.

Numerical Investigation on Vertical Axis Wind Turbine in Search for an Efficient Design

2015 ◽  
Author(s):  
Mosfequr Rahman ◽  
Mohammad Bashar ◽  
Gustavo Molina ◽  
Valentin Soloiu ◽  
Travis Salyers
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Lift Coefficient ◽  
Vertical Axis ◽  
Speed Ratio ◽  
Technological Advancement ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
The World ◽  
Alternative Sources

The continuous improvement of this world is based on technological advancement. And the technological advancement is directly related to the utilization of energy. The demand of energy is creeping up every day due to increase of population, industrial and agricultural advancement. But the conventional energy sources are becoming limited which is ultimately making them more expensive. In addition to this, everyone is concerned about global climate change. This whole scenario is pushing the world to find the alternative sources of energy. Alternative sources involve natural phenomena such as sunlight, wind, tides, plant growth, and geothermal heat. Solar and Wind power are the most popular among the various sources of renewable energy. Wind alone can fulfill most of the energy requirement of the world by its efficient conversion in to energy. Though Horizontal Axis Wind Turbine (HAWT) is more popular but needs high wind speed to extract energy from the wind. On the Other hand Vertical Axis Wind Turbine (VAWT) can run at low wind speed, independent of wind direction and can be installed anywhere with cheapest cost. The main objective of this research is to improve the design and performance of VAWT to make it more attractive, efficient, durable and sustainable. For a VAWT, the blades perform the main role to extract energy from the wind. Airfoil is considered as the blade for this new design of VAWT. Airfoil has some good aerodynamic characteristics, matches with the characteristics of Savonious type VAWT, such as good stall characteristics and little roughness affect, relatively high drag and low lift coefficient. Three dimensional CAD models of various simple airfoils have been designed in Solidworks. Using these airfoils CFD simulation has been performed for five different VAWT designed models. Moving mesh and fluid flow simulation have been performed using CFD software FLUENT. The findings of these numerical simulations provided pressure contour, velocity contour, drag coefficient, lift coefficient, torque coefficient and power coefficient for all these models. From the results it can be concluded that NACA7510 airfoil VAWT model gives the better performance at higher Tip Speed Ratio (λ) than other models.

scholarly journals Comparison of Computational Fluid Dynamics and Experimental Power Output of a Micro Horizontal-Axis Wind Turbine

2017 ◽  
Vol 7 (2 (S)) ◽  
pp. 11
Author(s):  
Sanjay Nikhade ◽  
Suhas Kongre ◽  
S. B. Thakre ◽  
S. S. Khandare
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Wind Turbine ◽  
Cfd Simulation ◽  
Horizontal Axis ◽  
Speed Ratio ◽  
Power Performance ◽  
Horizontal Axis Wind Turbine ◽  
Computational Fluid Dynamics Cfd

This paper presents a combined experimental and Computational Fluid Dynamics (CFD) simulation of Micro wind Turbine with 2.28 meters rotor Diameter is performed using the FLUENT 16.2 WORKBENCH. A Micro Horizontal Axis Three Blade Wind Turbine was designed, developed and tested for power performance on new airfoil AFN2016 Designed. The three blades were fabricated from glass fiber with a rotor swept area of 3.14 sq.m for the 1-meter length of the blade and angle of attack experimentally determined to be 5º.The blade is designed for tip speed ratio (TSR) of 7. The power out measured for wind speed from 3.0m/s to 9.0 m/s. The comparison of the CFD and experimental results on the relationship between the power obtained and the wind speed of the wind turbine at the wind from 3-9 m/s. It can be clearly seen that the experimental data match quite well again with the numerical analysis and they both demonstrated that the power of wind turbine increasing with wind speed increases.

Basic Design and Blade Structural Analysis of a Small Horizontal-Axis Wind Turbine for Low Wind Speeds

2020 ◽  
Author(s):  
A. R. Krishnanunni ◽  
N. Datta ◽  
H. S. Chambhare ◽  
D. Swaroop
Keyword(s):  
Structural Analysis ◽  
Wind Turbine ◽  
Horizontal Axis ◽  
Weather Data ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Basic Design ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds ◽  
Low Wind Speeds

Abstract The basic design and blade structural analysis of a 250 W rooftop-mounted horizontal-axis wind turbine for low wind speeds is presented. A simplified non-dimensional design is first undertaken to optimize the aerodynamic performance. The non-dimensional power curve vs. the design tip speed ratio is computed with the open-source wind turbine design software QBlade. SD7062 airfoil is chosen for the blade section; and its aerodynamic efficiency is obtained for various angles of attack using XFLR5. The design process also gives the optimal chord length and pitch distribution, leading to the blade geometry. The 22-month weather data at the site has been analyzed to obtain the best-fit Weibull distribution. The blade sizing is based on the maximum power coefficient before the stall regulation happens. An attempt is made to enhance the power capture by using a concentrator, whose aerodynamic efficacy is analyzed. The blades are fabricated from Glass Fiber Reinforced Plastic, which reduces both weight and cost. The configuration for the laminate is finalized after several bending and tensile tests of five distinct GFRP samples. This is followed by the structural analysis of the blade. The root stresses and tip deflection are analyzed for extreme-wind conditions, along with the free vibration frequencies.

scholarly journals Exergy and Energy Analysis of a CHP System with a Gas Turbine and a Horizontal Axis Wind Turbine

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Nima Norouzi
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Combustion Chamber ◽  
Gas Turbine ◽  
Pitch Angle ◽  
Speed Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Operational Costs ◽  
Chp System

The combined heating and power (CHP) system is among the most effective ways to increase energy and exergy efficiencies, reduce fuel consumption, and reduce operational costs. In this study, the combination of an electricity and heat CHP system with the prime movers of a gas turbine and a horizontal axis wind turbine under the strategy of providing electric charge has been investigated. This study aims to evaluate the effect of the wind turbine on the system. The Blade Element Momentum Theory (BEM) is used to model the wind turbine under different wind speeds, pitch angle, and tip speed ratios to show their effect on the gas turbine system under different combustion chamber temperatures and pressure ratios. The results show that the proposed CHP system has significant advantages over the separate production system. It is shown that the best operating condition for the wind turbine is at the wind speed of 12 m/s, the pitch angle of 5°, and the tip speed ratio of 3. Moreover, the wind speed and tip speed ratio effects become considerable at the high-pressure ratios of more than ten and the combustion chamber temperature below 1250°C on the total system's exergy efficiency. Also, compared to the separate production mode, operational costs and fuel consumption are reduced by about 55% and 60%, respectively. Finally, taking into account the interest rate, the payback period will be equal to 5.4 years.

Aerodynamic Design and Optimization of a Small Scale Wind Turbine

2014 ◽  
Author(s):  
G. Kröger ◽  
U. Siller ◽  
J. Dabrowski
Keyword(s):  
Wind Turbine ◽  
Power Output ◽  
Rotor Blade ◽  
Residential Buildings ◽  
Speed Ratio ◽  
Small Scale ◽  
Substantial Part ◽  
Optimized Design ◽  
Horizontal Axis Wind Turbine ◽  
Wind Speeds

Small scale wind turbines can meet a substantial part of the electricity demand of residential buildings and facilities in isolated areas. It is a curious fact, however, that for many of these systems the actual power output has been dramatically overestimated. This can be partially explained by the very high rated wind speeds at which the design power output applies. The current work depicts the pathway to an aerodynamically optimized design of a small scale horizontal axis wind turbine in the 1kW class, optimized for wind speeds between 3.5 m/s and 5.5 m/s, a typical range of the energetic average of urban wind speeds. The aerodynamic stability of the blade has been a particular focus leading to a nearly constant efficiency over a range of wind speeds. The rotating speed of the system is adjusted to the optimal tip speed ratio at wind speeds up to maximum power via active control of the aerodynamic torque of the rotor blades. This is realized by adapting the generator torque to the current wind speed guaranteeing optimal efficiency and power output. The rotor blade optimization has been conducted unconventionally, in a turbomachinery-inspired 3D-blade design optimization campaign, using high-fidelity compressible CFD. This approach is described in detail, focussing on geometry parametrization and the numerical model with reasonable boundary conditions. Finally, the aerodynamic performance of the rotor blade is assessed at different wind speeds and pitching angles.

SHAPING OF AN AUTONOMOUS POWER SYSTEM FOR GUARANTEED POWER SUPPLY WITH THE PREDOMINANCE WIND ENERGY

2018 ◽  
pp. 28-50
Author(s):  
S. G. Ignatiev ◽  
S. V. Kiseleva
Keyword(s):  
Energy Storage ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Demand ◽  
Diesel Generator ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Optimization of the autonomous wind-diesel plants composition and of their power for guaranteed energy supply, despite the long history of research, the diversity of approaches and methods, is an urgent problem. In this paper, a detailed analysis of the wind energy characteristics is proposed to shape an autonomous power system for a guaranteed power supply with predominance wind energy. The analysis was carried out on the basis of wind speed measurements in the south of the European part of Russia during 8 months at different heights with a discreteness of 10 minutes. As a result, we have obtained a sequence of average daily wind speeds and the sequences constructed by arbitrary variations in the distribution of average daily wind speeds in this interval. These sequences have been used to calculate energy balances in systems (wind turbines + diesel generator + consumer with constant and limited daily energy demand) and (wind turbines + diesel generator + consumer with constant and limited daily energy demand + energy storage). In order to maximize the use of wind energy, the wind turbine integrally for the period in question is assumed to produce the required amount of energy. For the generality of consideration, we have introduced the relative values of the required energy, relative energy produced by the wind turbine and the diesel generator and relative storage capacity by normalizing them to the swept area of the wind wheel. The paper shows the effect of the average wind speed over the period on the energy characteristics of the system (wind turbine + diesel generator + consumer). It was found that the wind turbine energy produced, wind turbine energy used by the consumer, fuel consumption, and fuel economy depend (close to cubic dependence) upon the specified average wind speed. It was found that, for the same system with a limited amount of required energy and high average wind speed over the period, the wind turbines with lower generator power and smaller wind wheel radius use wind energy more efficiently than the wind turbines with higher generator power and larger wind wheel radius at less average wind speed. For the system (wind turbine + diesel generator + energy storage + consumer) with increasing average speed for a given amount of energy required, which in general is covered by the energy production of wind turbines for the period, the maximum size capacity of the storage device decreases. With decreasing the energy storage capacity, the influence of the random nature of the change in wind speed decreases, and at some values of the relative capacity, it can be neglected.

Sign in / Sign up

Export Citation Format

Share Document