scholarly journals Conversion of Industrial Food Wastes Cranberry Pomace into Foods Blending with Rice Flour Using Single-screw Extrusion Process

2022 ◽  
Vol 5 (1) ◽  
pp. 44
Author(s):  
Pranabendu Mitra ◽  
Sagar Khanvilkar ◽  
Sai Kumar Samudrala ◽  
Kaushal Sunil Shroff
Keyword(s):  
Moisture Content ◽  
Physicochemical Properties ◽  
Water Solubility ◽  
Value Added ◽  
Rice Flour ◽  
Extrusion Process ◽  
Expansion Ratio ◽  
Screw Extruder ◽  
Single Screw ◽  
Single Screw Extruder

The main objective of this study was to convert the cranberry pomace into value-added extruded cereals/snacks blending with rice flour using a single screw extruder based on the physicochemical properties of extrudates because utilization of the byproduct cranberry pomace would be necessary for the growth of cranberry juice processing industries and the extruded snacks/cereals with higher fiber and antioxidant and less carbohydrate would be required to fulfill the consumers’ demand. The six different formulations by blending 0, 5, 10, 15, 20 and 25% cranberry pomace with 100, 95, 90, 85, 80 and 75% of rice flour, respectively, were extruded using a single screw extruder. The temperature (150℃), screw speed (270 rpm), feed rate (20 Kg/hr) and feed moisture content (35%) were constant during extrusion. The physicochemical properties of the extrudates were characterized to determine the desirable formulations. The results indicated that radial expansion ratio (1.11-1.67), the solid density (0.71-0.76 g/mL), piece density (0.20-0.63 g/mL), porosity (14.49-72.38%), hardness (23-157.73 N), crispness (4.17-13.5), moisture content (3.22-4.39%), water activity (0.14-0.36) and the water solubility (7.07-30.80%) of rice flour and cranberry pomace blend extrudates were varied depending on the combinations of the rice flour and cranberry pomace. The results revealed that up to 20% cranberry pomace could be added with 75-80% rice flour to develop high fiber and antioxidant with less carbohydrate cereal/snack products. The utilization of cranberry pomace combining with rice flour through extrusion process can provide a unique opportunity to generate healthier snacks and cereals that have higher fiber and antioxidant and low carbohydrate.

scholarly journals Technological properties of precooked flour containing coffee powder and rice by thermoplastic extrusion

2013 ◽  
Vol 33 (1) ◽  
pp. 7-13 ◽  
Author(s):  
Reginaldo Ferreira da Silva ◽  
Rosemary Gualberto Fonseca Alvarenga Pereira ◽  
José Luis Ramirez Ascheri ◽  
Diego Palmiro Ramirez Ascheri
Keyword(s):  
Water Solubility ◽  
Extrusion Process ◽  
Human Consumption ◽  
Technological Properties ◽  
Screw Extruder ◽  
The Third ◽  
Single Screw ◽  
Single Screw Extruder ◽  
Production And Consumption ◽  
Coffee Powder

Although Brazil is a country of tradition in both the production and consumption of coffee, the most of the coffee is consumed as a beverage, which reduces greatly the competitiveness on international market, for reducing the chances of supplying the product under other forms of consumption. Owing to that, the aim of this study was developing a precooked mixed flour containing coffee powder and rice for use in coffee flavored products. Mixtures of rice and coffee in the proportions of 900:100, 850:150 and 800:200 g, respectively, were processed in a single screw extruder (Brabender DS-20, Duisburg, German) and the effect of the extrusion process on the variables moisture content (16%, 18% and 20%) and temperature in the third extruding zone (140 °C, 160 °C and 180 °C) was studied. The results for expansion index ranged from 2.91 to 11.11 mm in diameter; the water absorption index from 4.59 to 6.33 g gel/g sample and the water solubility index varied from 4.05% to 8.57%. These results showed that, despite coffee powder influenced the variables studied, the expanded product after milling resulted in a extruded mixture with good absorption and water solubility indices, which favors the use of the precooked mixed flour for human consumption.

Effect of different extrusion methods on physicochemical properties and qualities of noodles based on rice flour

2021 ◽  
pp. 108201322110692
Author(s):  
Nispa Seetapan ◽  
Bootsrapa Leelawat ◽  
Nattawut Limparyoon ◽  
Rattana Yooberg
Keyword(s):  
Moisture Content ◽  
Rice Flour ◽  
Extrusion Process ◽  
Scanning Electron Micrographs ◽  
Twin Screw Extruder ◽  
Capillary Rheometer ◽  
Screw Extruder ◽  
Scanning Calorimetry ◽  
Twin Screw ◽  
Thermomechanical Processes

Rice noodles have been manufactured in the food industry using different extrusion methods, such as traditional and modern extrusions, which affect the noodle structure and qualities. Therefore, the effects of the extrusion process on qualities of rice noodles using the same blend of rice flour and crosslinked starch were evaluated. In this study, a capillary rheometer was used as an alternative approach to simulate the traditional extrusion method in which the noodles are obtained by continuously pressing the pregelatinized noodle dough through a die. For modern extrusion, a twin-screw extruder was employed to obtain the noodles in a one-step process. The optimal range of moisture content used in the formulation was studied. Upon cooking, the noodles showed a decrease in cooking time and cooking loss with increasing moisture content in the formulation. All cooked noodles showed comparable tensile strength, but those extruded by a twin-screw extruder had substantially greater elongation. Scanning electron micrographs revealed that the noodles prepared using the extruder had a denser starch matrix, while those obtained from a capillary rheometer showed the aggregation of starch fragments relevant to the existence of starch gelatinization endotherm from differential scanning calorimetry. This indicated that the extrusion process using the twin-screw extruder provided a more uniform starch transformation, i.e., more starch granule disruption and gelatinization, thus giving the noodles a more coherent structure and better extensibility after cooking. The obtained results suggested that different thermomechanical processes used in the noodle industry gave the extruded rice noodles different qualities respective to their different microstructures.

scholarly journals Characteristics of nanoclay reinforced starch biocomposites through the extrusion process

2018 ◽  
Vol 204 ◽  
pp. 00008
Author(s):  
Heru Suryanto ◽  
Alfian Widi Rahmawan ◽  
Solichin ◽  
Sahana Rizki Tata ◽  
Uun Yanuhar
Keyword(s):  
Tensile Strength ◽  
Functional Group ◽  
Extrusion Process ◽  
Cassava Starch ◽  
Diffraction Peak ◽  
Screw Extruder ◽  
Materials Engineering ◽  
Single Screw ◽  
Single Screw Extruder ◽  
Composite Properties

The development of materials engineering has led to many significant discoveries one of which is biocomposite with its diverse applications. The addition of reinforcing materials in biopolymers improves the composite properties. This study aimed at investigating the effect of adding nanoclay on the tensile strength, morphology, functional group, and structure of extruded biocomposites with cassava starch matrix. This experimental research involved different concentrations of nanoclay i.e. 0%, 2.5%, 5%, 7.5%. The extrusion process was performed using a single screw extruder at 120°C. The samples were characterized by tensile testing, XRD, and SEM. The biocomposite reinforced with 5% nanoclay had the highest tensile strength of 10.8 MPa. The highest diffraction peak at 2θ of 19.4° appeared in the sample added with 5% nanoclay. The addition of excessive amounts of nanoclay can hinder the formation of exfoliated structures.

The Effect of Screw Speed on Extrusion Quality of the Single-Screw Extruder

2014 ◽  
Vol 941-944 ◽  
pp. 1715-1719
Author(s):  
Yuan Lou Gao ◽  
Xin Wang ◽  
Li Zhou
Keyword(s):  
Extrusion Process ◽  
Screw Extruder ◽  
Screw Speed ◽  
Element Analysis ◽  
Outlet Pressure ◽  
Single Screw ◽  
Single Screw Extruder ◽  
Multi Phase Flow ◽  
Multi Phase

This paper adopts the method of multi-phase flow to simulate the extrusion process of single-screw extruder based on different screw speed by using the finite element analysis software, and get the conclusion that the screw speed has a significant effect on the extrusion quality and outlet pressure of the single-screw extruder. With the increase of the screw speed, the extrusion quality of the single-screw extruder gets worse and the outlet pressure of the single-screw extruder increases.

scholarly journals Cassava and turmeric flour blends as new raw materials to extruded snacks

2014 ◽  
Vol 38 (1) ◽  
pp. 68-75 ◽  
Author(s):  
Alessandra Mussato Spinello ◽  
Magali Leonel ◽  
Martha Maria Mischan ◽  
Ezequiel Lopes do Carmo
Keyword(s):  
Water Solubility ◽  
Raw Materials ◽  
Low Cost ◽  
Extrusion Process ◽  
Intermediate Water ◽  
Screw Extruder ◽  
Food Ingredients ◽  
Single Screw Extruder ◽  
Flour Blends ◽  
Central Composite

Short cooking time and ability to blend varieties of food ingredients have made extrusion cooking a medium for low-cost and nutritionally improved food products. The effect of moisture, extrusion temperature and amount of turmeric flour mixed with cassava flour on physical characteristic of puffed snacks was evaluated in this work. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Results showed effect of extrusion parameters on dependents variables. High expansion, low browning, low water solubility index, intermediate water absorption index and high crispness desirable characteristics to puffed snacks are obtained in conditions of 12% moisture, 5% turmeric flour, 105º C of temperature and 250 rpm of screw speed. These paper point to the potential still unexplored of the use of flours of cassava and turmeric as raw materials in the development of extruded puffed snacks.

scholarly journals Optimisation of extrusion variables for the production of corn snack products enriched with defatted hemp cake

2017 ◽  
Vol 35 (No. 6) ◽  
pp. 507-516 ◽  
Author(s):  
Jozinović Antun ◽  
Ačkar Đurđica ◽  
Jokić Stela ◽  
Babić Jurislav ◽  
Balentić Jelena Panak ◽  
...  
Keyword(s):  
Physical Properties ◽  
Colour Change ◽  
Extrusion Process ◽  
Expansion Ratio ◽  
Process Conditions ◽  
Supercritical Co2 Extraction ◽  
Screw Extruder ◽  
Single Screw Extruder ◽  
Extruded Products ◽  
Snack Products

The effects of defatted hemp cake added to corn grits (at ratios of 0, 5, and 10% DM), the moisture content of the mixtures (15, 20, and 25%) and the temperature in the extruder ejection zone (150, 165, and 180°C) on the physical properties of extruded products have been investigated. Statistical optimization of investigated extrusion conditions using the response surface methodology was performed. The hemp cake was completely defatted by means of a supercritical CO2 extraction. The extrusion was performed on a laboratory single screw extruder and regulated by the following parameters: temperature in the dosing and compression zone (120 and 150°C), screw compression ratio (4 : 1), round die (4 mm). The change of extrusion process conditions significantly affected the physical properties of produced snacks. The expansion ratio ranged between 1.38 and 3.11, bulk density between 0.14 and 0.49 g/cm3, hardness between 18.15 and 70.62 N, fracturability from 3.65 to 10.38 mm, and the total colour change between 3.25 and 24.73.

Sign in / Sign up

Export Citation Format

Share Document