Study of selected properties of red maple wood (Acer rubrum) from the experimental plot of the forest arboretum in Rogów

2021 ◽  
Vol 115 ◽  
pp. 5-17
Author(s):  
Paweł Kozakiewicz ◽  
Kaja McKinney
Keyword(s):  
Mechanical Properties ◽  
Acer Rubrum ◽  
Physical And Mechanical Properties ◽  
Acoustic Properties ◽  
Experimental Plant ◽  
Natural Occurrence ◽  
Experimental Plot ◽  
Red Maple ◽  
Trunk Diameter ◽  
Static Modulus

Study of selected properties of red maple wood (Acer rubrum) form the experimental plot of the forest arboretum in Rogów. As part of the work, investigation on the dendrometric, physical and mechanical properties of red maple trees and its wood from the Forest Experimental Plant in Rogów has been carried out. The obtained results of the research on the species experimentally introduced in Rogów were compared with the features of the Acer rubrum from the area of natural occurrence in North America. The results of the investigation showed that the trees from the Arboretum area have a lower height, a much smaller trunk diameter and their physical and mechanical properties are weaker than the maple wood grown in native conditions. Despite the above statements, the significant influence of the location of the wood in the trunk (distance to the core) on its density, acoustic properties and static modulus of elasticity, bending and compression strength along the fibers are noted.

scholarly journals Growth of Three Shade Tree Genera as Influenced by Irrigation and Nitrogen Rates

1983 ◽  
Vol 1 (1) ◽  
pp. 5-6
Author(s):  
R.D. Wright ◽  
E.B. Hale
Keyword(s):  
Shoot Growth ◽  
Acer Rubrum ◽  
Tree Height ◽  
First Year ◽  
Red Maple ◽  
Trunk Diameter ◽  
The Third ◽  
Growing Seasons ◽  
N Rates ◽  
Nitrogen Rates

The influence of N rates and irrigation on shoot growth and trunk diameter were evaluated for red maple (Acer rubrum, L. ‘October Glory’), pin oak (Quercus palustris Muenchh) and dogwood (Cornus florida L. ‘Barton’). Irrigation increased shoot growth and trunk diameter for all 3 species during the first 2 growing seasons. Tree height and trunk diameter at the end of the third growing season were also greater for irrigated trees. Increasing the N levels from 168 to 329 Kg N/ha (150 to 300 lb N/A) resulted in a decrease in trunk diameter the first year and a decrease in shoot growth the second year in ‘October Glory’ maple. No significant differences in oak growth due to N rate were observed. Shoot growth and trunk diameter for dogwood were greater at 329 kg N/ha (300 lb N/A) than at 168 kg N/ha (150 lb N/A) only the first year. Neither height or trunk diameter at end of the third year were significantly increased from applying the higher level of N for any of the genera.

The radial variation of the selected physical and mechanical properties of Norway spruce (Picea abies (L.) H. Karst) wood from the provenance area in Głuchów

2019 ◽  
Vol 105 ◽  
pp. 133-143
Author(s):  
KAROLINA ZAWADZKA ◽  
PAWEŁ KOZAKIEWICZ
Keyword(s):  
Mechanical Properties ◽  
Picea Abies ◽  
Norway Spruce ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Research Area ◽  
Radial Variation ◽  
Static Modulus ◽  
Spruce Wood ◽  
Static Modulus Of Elasticity

The radial variation of the selected physical and mechanical properties of Norway spruce (Picea abies (L.) H. Karst) wood from the provenance area in Głuchów. Spruce wood (Picea abies (L.) H. Karst) is one of the main species used in building constructions. Due to the wide occurrence, it is important to test various origins and in this way select those with the best material properties. Wood was obtained from one habitat from a provenance experimental area in Głuchów from 40-year-old trees. For the study, trees from three different origins were selected: Nowe Ramuki, Bliżyn and Rycerka Praszywka II (origin from respectively northern, central and southern Poland - seedlings came from these places). Spruce wood from Bliżyn, which is the closest to the proven research area in Głuchów, reached the highest average values in all studied traits (density, ultrasonic wave velocity, dynamic and static modulus of elasticity and static bending strength) and was characterized by the highest variability of these features. Regardless of the origin, the above-mentioned features of the wood showed a clear upward trend going from the pith to the to the side of the trunk.

scholarly journals Branch Union Morphology Affects Decay Following Pruning

2006 ◽  
Vol 32 (2) ◽  
pp. 74-79
Author(s):  
Edward Gilman ◽  
Jason Grabosky
Keyword(s):  
Growth Rate ◽  
Acer Rubrum ◽  
Indirect Evidence ◽  
Decayed Wood ◽  
Red Maple ◽  
Branch Diameter ◽  
Protection Zone ◽  
Trunk Diameter ◽  
Lateral Buds ◽  
Pruning Techniques

Branch diameter relative to the trunk diameter (aspect ratio) affected the extent of discolored and decayed wood in the trunk of seedling-propagated red maple (Acer rubrum L.) after branch removal. More discoloration resulted from removing codominant stems than removing branches that were small compared to the trunk. Removing limbs that originated from lateral buds resulted in the same amount of discoloration and decay as removing suppressed limbs that were once the leader. This result provides indirect evidence that a small codominant stem suppressed by pruning techniques designed to slow its growth rate can result in a branch protection zone at the union. There was no relation between the presence of a bark inclusion and decay 4 years after making pruning cuts.

scholarly journals Cyclanilide Differentially Affects Branching in Red Maple Cultivars and Hybrids

2011 ◽  
Vol 29 (1) ◽  
pp. 35-38
Author(s):  
Michael V. Mickelbart
Keyword(s):  
Large Scale ◽  
Acer Rubrum ◽  
Branch Length ◽  
Red Maple ◽  
Trunk Diameter ◽  
Transport Inhibitor ◽  
Total Branch Length ◽  
Auxin Transport Inhibitor ◽  
Second Year ◽  
Tree Production

Abstract Development of the canopy is an important aspect of ornamental shade tree production. Branching can be induced by pruning the apical meristem, but this process is time consuming and costly to growers. Cyclanilide is an auxin transport inhibitor that has been successfully used to eliminate apical dominance and increase branching in a number of tree species. In this study, we tested the effects of cyclanilide application in two years on branching, canopy form, and trunk diameter. Cyclanilide did not cause phytotoxicity symptoms in any cultivar at any rate. Two cultivars, Celebration® (Acer × freemanii A.E. Murray ‘Celzam’) and Sienna Glen® (Acer × freemanii ‘Sienna’) Freeman maples responded to cyclanilide treatments with increased primary and secondary shoots, whereas Red Sunset® red maple (Acer rubrum L. ‘Franksred’) and Autumn Blaze® Freeman maple (Acer × freemanii A.E. Murray ‘Jeffersred’) did not respond to any treatments. Responsive cultivars had approximately double the number of growing points and larger total branch length after second year applications, but this did not result in an increase in trunk caliper. Despite the increased number of shoots produced, overall canopy ratings did not differ among treatments. Cyclanilide had a limited affect on branching in red and Freeman maple whips. Furthermore, if growers choose to utilize this product, they should be aware that cultivar response is likely to vary, and initial testing should be done before making large-scale applications.

scholarly journals Effects of Root Pruning on Container-Grown Maple and Oak

2014 ◽  
Vol 32 (4) ◽  
pp. 208-214
Author(s):  
Donna Fare
Keyword(s):  
Acer Rubrum ◽  
Soil Surface ◽  
Height Growth ◽  
Diameter Growth ◽  
Root Pruning ◽  
Red Maple ◽  
Field Plot ◽  
Trunk Diameter ◽  
Reduced Height ◽  
Similar Growth

Two experiments were conducted on container-grown plants that were actively growing in spring to evaluate the effects of root pruning prior to repotting or planting in a field plot. In experiment 1, severe root pruning significantly reduced height and trunk diameter growth for both ‘Summer Red’ maple (Acer rubrum L) and overcup oak (Quercus lyrata Walt.) after repotting into a larger container. Shoot and root dry weights were less with plants severely root pruned compared to plants that were not root pruned or had been lightly root pruned. Overcup oaks that received no root pruning or were lightly root pruned did not differ in height or trunk growth 24 weeks after study initiation. However, overcup oaks severely root pruned had brown foliage within 10 days of repotting and within 2 months had extensive dieback, which resulted in negative height growth by the end of the study. In experiment 2, ‘Autumn Flame’ red maple that received no root pruning had similar growth to plants that had light root pruning, but was greater than plants that received moderate or severe root pruning during the first growing season in the field. Autumn Flame red maples severely root pruned prior to field planting had 65% less height growth than plants receiving no root pruning during year 1. After four years, shoot and trunk diameter growth was similar among treatments. The number of circling roots at the soil surface decreased as the amount of root pruning increased.

scholarly journals Styrene-lined and Copper-coated Containers Affect Production and Landscape Establishment of Red Maple

HortScience ◽  
1996 ◽  
Vol 31 (3) ◽  
pp. 353-356 ◽  
Author(s):  
Thomas J. Brass ◽  
Gary J. Keever ◽  
D. Joseph Eakes ◽  
Charles H. Gilliam
Keyword(s):  
Acer Rubrum ◽  
Growing Season ◽  
First Year ◽  
Red Maple ◽  
Copper Hydroxide ◽  
Fibrous Root ◽  
Trunk Diameter ◽  
Root Regeneration ◽  
Black Plastic ◽  
Landscape Establishment

Growth response of two red maple cultivars (Acer rubrum L. `October Glory' and `Northwood') to styrene lining or copper hydroxide coating of 23.3-liter black plastic containers was evaluated. After the first growing season, plants were left in their original container, repotted into 51.2-liter nontreated containers, or transplanted into the landscape. Copper hydroxide effectively reduced circling of roots of both cultivars at the medium–container interface during the first year of production, but was less effective during the second growing season. Repotting from copper-treated containers into 51.2-liter containers or transplanting into the landscape resulted in more fibrous root development and enhanced root regeneration outside the original rootball relative to transplanting from nontreated containers. However, when copper hydroxide was applied to styrene lining, root regeneration after transplanting was reduced. Roots of plants grown in styrene-lined containers covered the medium–container interface more thoroughly than those in nonlined containers, but height, trunk diameter, and root regeneration were similar. `October Glory' had a larger trunk diameter, more branching, and better root regeneration than `Northwood'.

scholarly journals Strength coefficient estimation by indirect methods

2021 ◽  
Vol 1 (3) ◽  
pp. 28-35
Author(s):  
Arkadii N. Avdeev ◽  
Elena L. Sosnovskaia ◽  
Aleksandr Iu. Bolotnev
Keyword(s):  
Mechanical Properties ◽  
Modulus Of Elasticity ◽  
Physical And Mechanical Properties ◽  
Acoustic Properties ◽  
Mining Operations ◽  
Indirect Methods ◽  
Strength Coefficient ◽  
Coefficient Estimation ◽  
Non Destructive ◽  
Gas Bearing

Introduction. In exploration, construction, and mining operations it is necessary to assess the physical and mechanical properties of rocks. However, laboratory rock tests are expensive, time-consuming, and require a large number of quality rock samples. There is a problem of rapid evaluation of physical and mechanical properties by indirect, non-destructive methods. The problem is considered on the example of one of the basic properties, the strength coefficient according to Protodiakonov's scale. Research methodology included the analysis of the main indirect methods of determining the strength coefficient based on strength, elastic and acoustic properties of rocks on the grounds of statistical empirical relationships of V. V. Rzhevskii, G. Ia. Novik, L. I. Baron; K. L. Ter-Mikaelian, A. I. Beron, and M. M. Protodiakonov. The most promising methods based on non-destructive laboratory tests of modulus of elasticity and longitudinal wave velocity are selected. Results and conclusions. The strength coefficient was calculated by several methods on the example of siliceous sandstones, selected from the exploration well of the gas-bearing field. The results were compared with each other and with cadastral references and materials. The most optimal for calculations were the dependences of V. V. Rzhevskii, G. Ia. Novik, and L. I. Baron when evaluating the strength coefficient by the modulus of elasticity, and the dependences of A. I. Beron and L. I. Baron when calculating based on acoustic characteristics.

scholarly journals Container Size and Initial Trunk Diameter Effects Growth of Acer rubrum L. During Production

2006 ◽  
Vol 24 (1) ◽  
pp. 18-22
Author(s):  
Donna C. Fare
Keyword(s):  
Acer Rubrum ◽  
Dry Weight ◽  
Growing Season ◽  
Height Growth ◽  
Diameter Growth ◽  
Red Maple ◽  
Trunk Diameter ◽  
Growing Seasons ◽  
Shoot Dry Weight ◽  
Bare Root

Abstract Two studies were conducted to determine container size and liner (young bare root trees) trunk diameter effects on growth of Acer rubrum L. ‘Franksred’, Red Sunset™ red maple. In experiment 1, maples liners with initial mean trunk diameters of 12.2 mm (0.5 in), 15.9 mm (0.6 in), and 22.3 mm (0.9 in) were potted in 26.5 liter (#7), 37.8 liter (#10), and 56.8 liter (#15) containers and grown for 18 months (2 growing seasons). Height and trunk diameter growth at the end of each growing season were affected by both the initial liner trunk diameter and container size. During year 1, liners with an initial trunk diameter of 12.2 mm (0.5 in) increased 28 and 70% more in height growth compared to liners initially 15.9 mm (0.6 in) and 22.3 mm (0.9) in trunk diameter, respectively. Twenty three percent more height growth occurred with maples in 37.8 liter (#10) and 56.8 liter (#15) containers compared to those in 26.5 liter (#7) containers. Trunk diameter growth increased 50% more with 12.2 mm (0.5 in) liners compared to 22.3 mm (0.9 in) liners. A 25% increase in trunk diameter growth occurred with liners potted in 56.8 liter (#15) compared to 26.5 liter (#7) containers. At the end of the second growing season, final tree size was similar with liners that were initially 12.2 mm (0.5 in) and 15.9 mm (0.6 in) liners in trunk diameter to those initially 22.3 mm (0.9 in) when potted into 37.8 liter (#10) and 56.8 liter (#15) containers. In experiment 2, maple liners with trunk diameters 17.5 mm (0.7 in), 20.5 mm (0.8 in), and 29.0 mm (1.1 in) were potted in container sizes 26.5 liter (#7), 37.8 liter (#10), and 56.8 liter (#15) and grown for 18 months (2 growing seasons). Liners grown in 56.8 liter (#15) containers had 92% more height growth and 48% more trunk diameter growth than with liners in 26.5 liter (#7) containers. At termination, the shoot dry weight was 41% larger with maples in 56.8 liter (#15) containers compared to those grown in 26.5 liter (#7) containers.

scholarly journals Landscape Establishment for Baldcypress, Red Maple, and Chaste tree is Delayed for Trees Transplanted from Larger Containers1

2017 ◽  
Vol 35 (2) ◽  
pp. 43-57
Author(s):  
Lauren M. Garcia Chance ◽  
Michael A. Arnold ◽  
Leonardo Lombardini ◽  
W. Todd Watson ◽  
Sean T. Carver ◽  
...  
Keyword(s):  
Growth Rates ◽  
Acer Rubrum ◽  
Taxodium Distichum ◽  
Red Maple ◽  
Photosynthetic Gas Exchange ◽  
Trunk Diameter ◽  
Growing Seasons ◽  
Transplant Shock ◽  
Agnus Castus ◽  
Chaste Tree

Abstract With container-grown trees offered to the public in an increasing array of sizes, it is important to determine the effects of different sizes of container stock on transplant establishment. Clonal replicates of Vitex agnus-castus, Acer rubrum var. drummondii, and Taxodium distichum grown under common nursery conditions in five container sizes, 3.5, 11.7, 23.3, 97.8, or 175.0 L (#1, #3, #7, #25, or #45, respectively), were transplanted to a sandy clay loam field. Physiological stress was measured using xylem water potential and photosynthetic gas exchange rates. Height, trunk diameter, and canopy spread were monitored post-transplant for three growing seasons and root growth was sampled for the first two growing seasons. Trees of all three species from smaller-sized containers, 23.3 L (#7) or less, exhibited reduced transplant shock, decreased establishment time and increased growth rates in comparison to larger-sized containers, apart from increased mortality in 3.5 L (#1) A. rubrum and slower growth in 3.5 L (#1) T. distichum compared to those transplanted from 11.7 L (#3) or 23.3 L (#7) containers Reduced stress levels and increased growth rates corresponded in timing with greater change in root extension of smaller container-grown trees. At the end of three growing seasons, no statistical differences in height or trunk diameter were present for V. agnus-castus container sizes. With a modest wait, consumers may find that smaller container-grown trees will overcome transplant stress more quickly and exhibit growth rates that surpass those of larger container-grown trees. Index words: Acer rubrum, Taxodium distichum, Vitex agnus-castus, container-grown trees, transplant shock, transplant establishment, photosynthesis, transpiration, water stress. Species used in this study: Chaste tree (Vitex agnus-castus L. [an unnamed white flowering clone]); red maple (Acer rubrum L. var. dummondii [Hook. & Arn. ex Nutt.] Sarg. ‘Maroon'); bald cypress (Taxodium distichum (L.) Rich. [test clone TX8DD38]).

scholarly journals Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Limin Peng ◽  
Boqi Song ◽  
Junfeng Wang ◽  
Dong Wang
Keyword(s):  
Mechanical Properties ◽  
Composite Material ◽  
Sound Absorption ◽  
Natural Fiber ◽  
Wood Fiber ◽  
Physical And Mechanical Properties ◽  
Polyester Fiber ◽  
Acoustic Properties ◽  
Absorbing Material ◽  
Press Time

A sound-absorbing composite material made of wood fiber and polyester fiber was produced using polyester foam technology and wood-based composite technology. This study investigated the physical and mechanical properties and the effects of the airflow resistivity of the materials and the depth of the cavities behind on sound-absorbing performance of the composite material. The results showed that the composite of best physical and mechanical properties and sound absorption was made with a 150°C hot-pressing temperature, 10 min hot-press time, 3 : 1 the ratio of wood fiber to polyester fiber, foaming agent content of 8%, and the nominal density of 0.2 g/cm3; the composite material yielded superior sound absorption property with the airflow resistivity of 1.98 × 105 Pa·s/m2; the acoustic absorption peak moved to lower frequencies when length of the cavities was increased.

Sign in / Sign up

Export Citation Format

Share Document