scholarly journals Dielectric Analysis Model for Measurement of Soil Moisture Water Content Using Electrical Capacitance Volume Tomography

2020 ◽  
Author(s):  
Mukhlisin Muhammad ◽  
Saputra Almushfi
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Dielectric Analysis ◽  
Electrical Capacitance ◽  
Analysis Model ◽  
Electrical Capacitance Volume Tomography

Effectiveness of Electrical Capacitance Volume Tomography Method in Soil Water Content Measurement

2013 ◽  
Vol 65 (2) ◽  
Author(s):  
Siti Fatin Mohd. Razali ◽  
Johari Abd. Wahab ◽  
Muhammad Mukhlisin ◽  
Ishak Arshad ◽  
Zawawi Samba Mohamed
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Soil Water Content ◽  
Electrical Capacitance ◽  
Content Measurement ◽  
Electrical Capacitance Volume Tomography ◽  
Tomography Method

Electrical Capacitance Volume Tomography (ECVT) for industrial and medical applications-An Overview

2015 ◽  
Vol 11 (1) ◽  
pp. 2897-2908
Author(s):  
Mohammed S.Aljohani
Keyword(s):  
Imaging Technique ◽  
Three Dimensional ◽  
Biological Processes ◽  
Electrical Capacitance ◽  
Image Reconstruction Techniques ◽  
Phase Dynamics ◽  
Non Invasive ◽  
Electrical Capacitance Volume Tomography ◽  
And Performance ◽  
Optimization And Performance

Tomography is a non-invasive, non-intrusive imaging technique allowing the visualization of phase dynamics in industrial and biological processes. This article reviews progress in Electrical Capacitance Volume Tomography (ECVT). ECVT is a direct 3D visualizing technique, unlike three-dimensional imaging, which is based on stacking 2D images to obtain an interpolated 3D image. ECVT has recently matured for real time, non-invasive 3-D monitoring of processes involving materials with strong contrast in dielectric permittivity. In this article, ECVT sensor design, optimization and performance of various sensors seen in literature are summarized. Qualitative Analysis of ECVT image reconstruction techniques has also been presented.

scholarly journals Column flotation monitoring based on electrical capacitance volume tomography: A preliminary study

2017 ◽  
Author(s):  
Didied Haryono ◽  
Sri Harjanto ◽  
Harisma Nugraha ◽  
Mahfudz Al Huda ◽  
Warsito Purwo Taruno
Keyword(s):  
Column Flotation ◽  
Electrical Capacitance ◽  
Electrical Capacitance Volume Tomography ◽  
Preliminary Study

EFFECT OF DEFICIT IRRIGATION ON YIELD, RELATIVE LEAF WATER CONTENT, LEAF PROLINE ACCUMULATION AND CHLOROPHYLL STABILITY INDEX OF COTTON–MAIZE CROPPING SEQUENCE

2013 ◽  
Vol 50 (3) ◽  
pp. 407-425 ◽  
Author(s):  
T. SAMPATHKUMAR ◽  
B. J. PANDIAN ◽  
P. JEYAKUMAR ◽  
P. MANICKASUNDARAM
Keyword(s):  
Soil Moisture ◽  
Water Stress ◽  
Water Content ◽  
Deficit Irrigation ◽  
Stability Index ◽  
Moisture Gradient ◽  
Proline Content ◽  
Leaf Water Content ◽  
Chlorophyll Stability Index ◽  
Soil Moisture Gradient

SUMMARYWater stress induces some physiological changes in plants and has cumulative effects on crop growth and yield. Field experiments were conducted to study the effect of deficit irrigation (DI) on yield and some physiological parameters in cotton and maize in a sequential cropping system. Creation of soil moisture gradient is indispensable to explore the beneficial effects of partial root zone drying (PRD) irrigation and it could be possible only through alternate deficit irrigation (ADI) practice in paired row system of drip layout that is commonly practiced in India. In the present study, PRD and DI concepts (creation of soil moisture gradient) were implemented through ADI at two levels of irrigation using drip system. Maize was sown after cotton under no till condition without disturbing the raised bed and drip layout. Relative leaf water content (RLWC) and chlorophyll stability index (CSI) of cotton and maize were reduced under water stress. A higher level of leaf proline content was observed under severe water-stressed treatments in cotton and maize. RLWC and CSI were highest and leaf proline content was lowest in mild water deficit (ADI at 100% crop evapotranspiration once in three days) irrigation in cotton and maize. The same treatments registered higher values for crop yields, net income and benefit cost ratio for both the crops.

Soil moisture variation drives canopy water content dynamics across the western U.S.

2021 ◽  
Vol 253 ◽  
pp. 112233
Author(s):  
Drew S. Lyons ◽  
Solomon Z. Dobrowski ◽  
Zachary A. Holden ◽  
Marco P. Maneta ◽  
Anna Sala
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Moisture Variation ◽  
Canopy Water ◽  
Soil Moisture Variation

scholarly journals Characterizing Soil Physical Properties for Soil Moisture Monitoring with the North Carolina Environment and Climate Observing Network

2012 ◽  
Vol 29 (7) ◽  
pp. 933-943 ◽  
Author(s):  
Weinan Pan ◽  
R. P. Boyles ◽  
J. G. White ◽  
J. L. Heitman
Keyword(s):  
North Carolina ◽  
Soil Moisture ◽  
Physical Properties ◽  
Soil Properties ◽  
Water Content ◽  
Bulk Density ◽  
Soil Physical Properties ◽  
The North ◽  
Wide Range ◽  
Soil Moisture Monitoring

Abstract Soil moisture has important implications for meteorology, climatology, hydrology, and agriculture. This has led to growing interest in development of in situ soil moisture monitoring networks. Measurement interpretation is severely limited without soil property data. In North Carolina, soil moisture has been monitored since 1999 as a routine parameter in the statewide Environment and Climate Observing Network (ECONet), but with little soils information available for ECONet sites. The objective of this paper is to provide soils data for ECONet development. The authors studied soil physical properties at 27 ECONet sites and generated a database with 13 soil physical parameters, including sand, silt, and clay contents; bulk density; total porosity; saturated hydraulic conductivity; air-dried water content; and water retention at six pressures. Soil properties were highly variable among individual ECONet sites [coefficients of variation (CVs) ranging from 12% to 80%]. This wide range of properties suggests very different behavior among sites with respect to soil moisture. A principal component analysis indicated parameter groupings associated primarily with soil texture, bulk density, and air-dried water content accounted for 80% of the total variance in the dataset. These results suggested that a few specific soil properties could be measured to provide an understanding of differences in sites with respect to major soil properties. The authors also illustrate how the measured soil properties have been used to develop new soil moisture products and data screening for the North Carolina ECONet. The methods, analysis, and results presented here have applications to North Carolina and for other regions with heterogeneous soils where soil moisture monitoring is valuable.

scholarly journals Growth and physiological response of two biomass sorghum (Sorghum bicolor (L.) Moench) genotypes bred for different environments, to contrasting levels of soil moisture

2015 ◽  
Vol 10 (4) ◽  
pp. 208 ◽  
Author(s):  
Lorenzo Barbanti ◽  
Ahmad Sher ◽  
Giuseppe Di Girolamo ◽  
Elio Cirillo ◽  
Muhammad Ansar
Keyword(s):  
Soil Moisture ◽  
Stomatal Conductance ◽  
Water Potential ◽  
Water Content ◽  
Aboveground Biomass ◽  
Relative Water Content ◽  
Physiological Response ◽  
Field Capacity ◽  
Biomass Sorghum ◽  
Relative Water

A better understanding of plant mechanisms in response to drought is a strong premise to achieving high yields while saving unnecessary water. This is especially true in the case of biomass crops for non-food uses (energy, fibre and forage), grown with limited water supply. In this frame, we investigated growth and physiological response of two genotypes of biomass sorghum (<em>Sorghum bicolor</em> (L.) Moench) to contrasting levels of soil moisture in a pot experiment carried out in a greenhouse. Two water regimes (high and low water, corresponding to 70% and 30% field capacity) were applied to JS-2002 and Trudan-8 sorghum genotypes, respectively bred for dry sub-tropical and mild temperate conditions. Two harvests were carried out at 73 and 105 days after seeding. Physiological traits (transpiration, photosynthesis and stomatal conductance) were assessed in four dates during growth. Leaf water potential, its components and relative water content were determined at the two harvests. Low watering curbed plant height and aboveground biomass to a similar extent (ca. 􀀀70%) in both genotypes. JS-2002 exhibited a higher proportion of belowground to aboveground biomass, <em>i.e</em>., a morphology better suited to withstand drought. Despite this, JS-2002 was more affected by low water in terms of physiology: during the growing season, the average ratio in transpiration, photosynthesis and stomatal conductance between droughty and well watered plants was, respectively, 0.82, 0.80 and 0.79 in JS-2002; 1.05, 1.08 and 1.03 in Trudan-8. Hence Trudan-8 evidenced a ca. 20% advantage in the three traits. In addition, Trudan-8 could better exploit abundant moisture (70% field capacity), increasing aboveground biomass and water use efficiency. In both genotypes, drought led to very low levels of leaf water potential and relative water content, still supporting photosynthesis. Hence, both morphological and physiological characteristics of sorghum were involved in plant adaptation to drought, in accordance with previous results. Conversely, the common assumption that genotypes best performing under wet conditions are less suited to face drought was contradicted by the results of the two genotypes in our experiment. This discloses a potential to be further exploited in programmes of biomass utilization for various end uses, although further evidence at greenhouse and field level is needed to corroborate this finding.

scholarly journals RANCANG BANGUN SISTEM PENYIRAMAN TANAMAN SAYUR BERBASIS ARDUINO DENGAN SENSOR KELEMBABAN TANAH

2020 ◽  
Vol 1 (1) ◽  
pp. 23-32
Author(s):  
Sampurna Dadi Riskiono ◽  
Roy Harry Syidiq Pamungkas ◽  
Yudha Arya
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Manual Work ◽  
Tomato Plants ◽  
Moisture Sensor ◽  
Final Project ◽  
Soil Moisture Sensor ◽  
Turn On ◽  
System Components ◽  
Arduino Uno

Development at this time is increasing, people expect a tool or technology that can help human work, so technology becomes a necessity for humans. This final task is made a device that can do the job of watering tomato plants automatically. This tool aims to replace the manual work becomes automatic. The benefit of this tool is that it can facilitate the work of humans in watering chili plants. This tool uses a soil moisture sensor which acts as a soil moisture detector and sends an order to Arduino Uno to turn on the relay driver so that the wiper motor can splash water according to the needs of the soil automatically. The making of this final project is done by designing, making and implementing system components which include Arduino uno as a controller, driver relay to blow on and off the wiper motor, LCD (Linquit Cristal Display) to display the percentage value of water content

scholarly journals A Novel Lithium Foil Cosmic-Ray Neutron Detector for Measuring Field-Scale Soil Moisture

2021 ◽  
Vol 3 ◽  
Author(s):  
Andres Patrignani ◽  
Tyson E. Ochsner ◽  
Benjamin Montag ◽  
Steven Bellinger
Keyword(s):  
Soil Moisture ◽  
Water Content ◽  
Atmospheric Pressure ◽  
Lower Cost ◽  
Cosmic Ray ◽  
Absolute Difference ◽  
Atmospheric Conditions ◽  
Volumetric Soil Water Content ◽  
The Mean

During the past decade, cosmic-ray neutron sensing technology has enabled researchers to reveal soil moisture spatial patterns and to estimate landscape-average soil moisture for hydrological and agricultural applications. However, reliance on rare materials such as helium-3 increases the cost of cosmic-ray neutron probes (CRNPs) and limits the adoption of this unique technology beyond the realm of academic research. In this study, we evaluated a novel lower cost CRNP based on moderated ultra-thin lithium-6 foil (Li foil system) technology against a commercially-available CRNP based on BF3 (boron trifluoride, BF-3 system). The study was conducted in a cropped field located in the Konza Prairie Biological Station near Manhattan, Kansas, USA (325 m a.s.l.) from 10 April 2020 to 18 June 2020. During this period the mean atmospheric pressure was 977 kPa, the mean air relative humidity was 70%, and the average volumetric soil water content was 0.277 m3 m−3. Raw fast neutron counts were corrected for atmospheric pressure, atmospheric water vapor, and incoming neutron flux. Calibration of the CRNPs was conducted using four intensive field surveys (n &gt; 120), in combination with continuous observations from an existing array of in situ soil moisture sensors. The time series of uncorrected neutron counts of the Li foil system was highly correlated (r2 = 0.91) to that of the BF-3 system. The Li foil system had an average of 2,250 corrected neutron counts per hour with an uncertainty of 2.25%, values that are specific to the instrument size, detector configuration, and atmospheric conditions. The estimated volumetric water content from the Li foil system had a mean absolute difference of 0.022 m3 m−3 compared to the value from the array of in situ sensors. The new Li foil detector offers a promising lower cost alternative to existing cosmic-ray neutron detection devices used for hectometer-scale soil moisture monitoring.

scholarly journals Numerical investigation of wetting front migration and soil water distribution under vertical line source irrigation with different influencing factors

2021 ◽  
Author(s):  
Yanwei Fan ◽  
Liangjun Ma ◽  
Hujun Wei ◽  
Pengcheng Zhu
Keyword(s):  
Soil Moisture ◽  
Moisture Content ◽  
Water Content ◽  
Influencing Factors ◽  
Line Source ◽  
Vertical Line ◽  
Initial Water Content ◽  
Wetting Front ◽  
Simulation Results ◽  
Soil Wetting

Abstract Vertical line source irrigation (VLSI) is an underground irrigation method suitable for deep-rooted plants. Understanding the characteristics of the soil wetting body of the VLSI was the key to designing this irrigation system. On the basis of experimental verification of the reliability of the HYDRUS simulation results of VLSI under the conditions of soil texture (ST), initial water content (θi), line source buried depth (B), line source diameter (D) and line source length (L), numerical studies of the migration law of the wetting front of VLSI and the distribution characteristics of soil moisture were performed. The wetting front migration (WFM) was mainly influenced by ST, θi, D and L (P &lt; 0.05), while B had little effect on WFM (P &gt; 0.05). The shape of the soil wetting body changed little under different influencing factors. The water content contour was approximately ‘ellipsoidal’ around the line source. The soil moisture near the line source was close to the saturated moisture content. The moisture content around the line source gradually decreased outward, and the contour lines gradually became dense. According to the simulation results, a prediction model of multiple factors influencing the migration process of the VLSI wetting front was established. The predicted value was in good agreement with the measured value. The results of this research could provide a theoretical basis for further optimizing the combination of VLSI and irrigation elements.

Sign in / Sign up

Export Citation Format

Share Document