scholarly journals Hentei-Dauria fold system of the Mongolia-Okhotsk belt: magmatism, sedimentogenesis, and geodynamics

2018 ◽  
Vol 9 (3) ◽  
pp. 1063-1097 ◽  
Author(s):  
I. V. Gordienko ◽  
O. R. Minina ◽  
L. I. Vetluzhskikh ◽  
A. Ya. Medvedev ◽  
D. Odgerel
Keyword(s):  
Deep Sea ◽  
Subduction Zones ◽  
Sedimentary Basins ◽  
Comprehensive Model ◽  
Fold System ◽  
Active Margins ◽  
Quiescence Period ◽  
Three Stages ◽  
Accretionary Prisms ◽  
Back Arc

The geostructural, petrological, geochemical, geochronological and biostratigraphic studies were conducted in the Hentei-Dauria fold system of the Mongolia-Okhotsk orogenic belt. This Paleozoic system is composed mainly of three heterochronous rock associations related to the onset and development of oceanic basins and active margins in the conjugation zone of the Siberian continent and the Mongolia-Okhotsk ocean. This region developed in three stages: (1) Late Caledonian (Ordovician – Early Silurian), (2) Early Hercynian (Late Silurian – Devonian), and (3) Late Hercynian (Carboniferous–Permian). In the Late Caledonian, oceanic seafloor spreading was initiated, deep-sea siliceous deposits were formed, basaltic and andesitic pillow lavas were erupted, and layered and cumulative gabbros, gabbro-dolerite dykes and subduction zones with island-arc magmatism were formed. After a short quiescence period, new zones of spreading and subduction occurred at the active margins of the Mongolia-Okhotsk ocean in the Early Hercynian. In the Late Hercynian, large back-arc sedimentary basins, accretionary prisms and connecting intraplate magmatic complexes were formed in all structures of the Hentei-Dauria fold system. As a result of our studies, we propose a comprehensive model showing the geodynamic development of the Hentei-Dauria fold system that occurred in the area of the Mongolia-Okhotsk Ocean and its margins.

Opening and closure of Iranian back-arc basins: A seismic tomography view

2021 ◽  
Author(s):  
Nalan Lom ◽  
Abdul Qayyum ◽  
Derya Gürer ◽  
Douwe G. van der Meer ◽  
Wim Spakman ◽  
...  
Keyword(s):  
Seismic Tomography ◽  
Subduction Zones ◽  
Three Dimensional ◽  
Plate Motion ◽  
Limited Information ◽  
Three Dimensional Model ◽  
Slab Geometry ◽  
Novel Approach ◽  
Sanandaj Sirjan Zone ◽  
Back Arc

<p>Iran is a mosaic of continental blocks that are surrounded by Tethyan oceanic relics. Remnants of these oceanic rock assemblages are exposed around the Central Iranian Microcontinent (CIM), discretely along the Sanandaj-Sirjan Zone and in Jaz-Murian. The ophiolite belts surrounding the CIM are mainly assumed to represent narrow back-arc basins that opened in Cretaceous and closed before the Eocene. Although these ophiolites are exposed as small pieces on continental crust today, they represent oceans wide enough to form supra-subduction ophiolites and arc-related magmatic rocks which suggest that their palaeogeographic width was at least some hundreds of kilometers. Current models for the palaeogeographic dimension, opening and closure of these basins are highly schematic. They usually seem plausible in two-dimensional reconstructions, however a single three-dimensional model explaining whole Iran and its surrounding regions has not been fully accomplished.  This is mostly because while the geological record provides constraints on the origin and ages of the subducted ocean floor, it provides limited information about onset and cessation of the subduction and almost no constraints on the dimension of these oceans and the subduction zones that consumed them.</p><p>In this study, we follow a novel approach in estimating the dimension and evolution of these back-arc basin by using seismic tomography. Seismic tomography has revealed that we can image and trace subducted lithosphere relics. Imaged mantle structure is now being used to link sinking slabs with sutures and to define shape of a slab. Systematic comparison of regions where the timing of subduction is reasonably well constrained by geological data showed that slabs sink gradually through the mantle at rates more or less the same. This perspective enabled us to study slab shape as a function of absolute trench motion. While mantle stationary trenches tend to create steep slabs or slab walls, the flat-lying segments are formed where the overlying trenches are mobile relative to the mantle, normal facing during roll-back, overturned during slab advance.  Under the assumption of vertical sinking after break-off, it is also possible to locate the palaeo-trenches.  When combined with absolute plate motion reconstructions, tomographically determined volume and size of the subducted lithosphere can also be used to estimate the size/width of the prehistoric oceans. To this end, we build on and further develop concepts that relate absolute trench motion during subduction to modern slab geometry to evaluate the possible range of dimensions associated with opening and closure of the Iranian back-arc basins.</p>

Seismic Structure and Tectonic Evolution of Borneo and Sulawesi

2021 ◽  
Author(s):  
Harry Telajan Linang ◽  
Amy Gilligan ◽  
Jennifer Jenkins ◽  
Tim Greenfield ◽  
Felix Tongkul ◽  
...  
Keyword(s):  
Subduction Zones ◽  
Receiver Function ◽  
Leading Edge ◽  
Sedimentary Basins ◽  
Crustal Thickness ◽  
The Philippines ◽  
Seismic Structure ◽  
Eurasian Plate ◽  
Seismic Stations ◽  
Preliminary Results

<div> <div> <div> <p>Borneo is located at the centre of Southeast Asia, which is one of the most active tectonic regions on Earth due to the subduction of the Indo-Australian plate in the south and the Philippines Sea plate in the east. Borneo resides on the leading edge of the Sundaland block of the Eurasian plate and exhibits lower rates of seismicity when compared to the surrounding regions due to its intraplate setting. Sulawesi, an island which lies just southeast of Borneo, is characterised by intense seismicity due to multiple subduction zones in its vicinity. The tectonic relationship between the two islands is poorly understood, including the provenance of their respective lithospheres, which may have Eurasian and/or East Gondwana origin.</p> <p>Here, we present recent receiver function (RF) results from temporary and permanent broadband seismic stations in the region, which can be used to help improve our understanding of the crust and mantle lithosphere beneath Borneo and Sulawesi. We applied H-K stacking, receiver function migration and inversion to obtain reliable estimates of the crustal thickness beneath the seismic stations. Our preliminary results indicate that the crust beneath Sabah (in northern Borneo), which is a post-subduction setting, appears to be much more complex and is overall thicker (more than 35 km) than the rest of the island. In addition, we find that crustal thickness varies between different tectonic blocks defined from previous surface mapping, with the thinnest crust (23 to 25 km) occurring beneath Sarawak in the west-northwest as well as in the east of Kalimantan.</p> <p>We also present preliminary results from Virtual Deep Seismic Sounding (VDSS) in northern Borneo, where from the RF results we know that there is thick and complex crust. VDSS is able to produce well constrained crustal thickness results in regions where the RF analysis has difficulty recovering the Moho, likely due to complexities such as thick sedimentary basins and obducted ophiolite sequences.</p> </div> </div> </div>

scholarly journals The Origin of Back-Arc Spreading in The Eastern Edge of Scotia Plate

2016 ◽  
Vol 5 (1) ◽  
pp. 21
Author(s):  
Indra Budi Prasetyawan
Keyword(s):  
Subduction Zones ◽  
Sandwich Plate ◽  
Magnetic Anomalies ◽  
South American ◽  
The South ◽  
Origin And Evolution ◽  
Bathymetric Data ◽  
Scotia Ridge ◽  
Back Arc ◽  
Eastern Edge

The origin and evolution of  back-arc spreading in the eastern edge of Scotia Plate will be discussed in this paper. The Scotia Plate is a tectonicplate on the edge of the South Atlantic and Southern Ocean, located between the South American and Antartic plates. The East Scotia Ridge (ESR) in the eastern edge of Scotia Plate, forned due to subduction of the South American plate beneath the South Sandwich plate along the South Sandwich Island arc. The methods and techniques of data acquisition used were data from absolution motions and data from magnetic anomalies and bathymetric data. Magnetic anomalies and  bathymetric data that used in this paper consist of two sets data. First, magnetic anomalies and  bathymetric data which were obtained by aboard HMS Endurance in the 1969-70 austral summer, and the second, magnetic anomalies and  bathymetric data which were obtained after removal of the International Geomagnetic Reference Field (IGRF). Absolution motion analyses in the subduction zones of Sandwich plate results that form back-arc spreading in East Scotia Ridge showing high deformation for slow moving upper plates. Where back-arc spreading is associated with upper plate retreat that reaches 26.9 mm/year and have back-arc deformation style consistent with upper plate absolute. Key Words: Geological oceanography, Scotia plate, back-arc spreading

scholarly journals Ophiolitic Pyroxenites Record Boninite Percolation in Subduction Zone Mantle

Minerals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 565 ◽  
Author(s):  
Véronique Le Roux ◽  
Yan Liang
Keyword(s):  
Subduction Zone ◽  
Subduction Zones ◽  
Mantle Wedge ◽  
Major Element ◽  
Early Stage ◽  
Diffusion Modeling ◽  
Melt Infiltration ◽  
Melt Percolation ◽  
Back Arc ◽  
Parental Melts

The peridotite section of supra-subduction zone ophiolites is often crosscut by pyroxenite veins, reflecting the variety of melts that percolate through the mantle wedge, react, and eventually crystallize in the shallow lithospheric mantle. Understanding the nature of parental melts and the timing of formation of these pyroxenites provides unique constraints on melt infiltration processes that may occur in active subduction zones. This study deciphers the processes of orthopyroxenite and clinopyroxenite formation in the Josephine ophiolite (USA), using new trace and major element analyses of pyroxenite minerals, closure temperatures, elemental profiles, diffusion modeling, and equilibrium melt calculations. We show that multiple melt percolation events are required to explain the variable chemistry of peridotite-hosted pyroxenite veins, consistent with previous observations in the xenolith record. We argue that the Josephine ophiolite evolved in conditions intermediate between back-arc and sub-arc. Clinopyroxenites formed at an early stage of ophiolite formation from percolation of high-Ca boninites. Several million years later, and shortly before exhumation, orthopyroxenites formed through remelting of the Josephine harzburgites through percolation of ultra-depleted low-Ca boninites. Thus, we support the hypothesis that multiple types of boninites can be created at different stages of arc formation and that ophiolitic pyroxenites uniquely record the timing of boninite percolation in subduction zone mantle.

scholarly journals A biogeographic network reveals evolutionary links between deep-sea hydrothermal vent and methane seep faunas

2016 ◽  
Vol 283 (1844) ◽  
pp. 20162337 ◽  
Author(s):  
Steffen Kiel
Keyword(s):  
Pacific Ocean ◽  
Deep Sea ◽  
Hydrothermal Vents ◽  
Subduction Zones ◽  
Continental Margins ◽  
Stepping Stones ◽  
The Pacific ◽  
The Pacific Ocean ◽  
Active Continental Margins ◽  
Ocean Ridge

Deep-sea hydrothermal vents and methane seeps are inhabited by members of the same higher taxa but share few species, thus scientists have long sought habitats or regions of intermediate character that would facilitate connectivity among these habitats. Here, a network analysis of 79 vent, seep, and whale-fall communities with 121 genus-level taxa identified sedimented vents as a main intermediate link between the two types of ecosystems. Sedimented vents share hot, metal-rich fluids with mid-ocean ridge-type vents and soft sediment with seeps. Such sites are common along the active continental margins of the Pacific Ocean, facilitating connectivity among vent/seep faunas in this region. By contrast, sedimented vents are rare in the Atlantic Ocean, offering an explanation for the greater distinction between its vent and seep faunas compared with those of the Pacific Ocean. The distribution of subduction zones and associated back-arc basins, where sedimented vents are common, likely plays a major role in the evolutionary and biogeographic connectivity of vent and seep faunas. The hypothesis that decaying whale carcasses are dispersal stepping stones linking these environments is not supported.

scholarly journals Strain-Induced Fabric Transition of Chlorite and Implications for Seismic Anisotropy in Subduction Zones

Minerals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 503
Author(s):  
Dohyun Kim ◽  
Haemyeong Jung ◽  
Jungjin Lee
Keyword(s):  
Shear Strain ◽  
Subduction Zones ◽  
Seismic Anisotropy ◽  
Shear Plane ◽  
Shear Direction ◽  
S Wave ◽  
Lattice Preferred Orientation ◽  
Back Arc

Seismic anisotropy of S-wave, trench-parallel or trench-normal polarization direction of fast S-wave, has been observed in the fore-arc and back-arc regions of subduction zones. Lattice preferred orientation (LPO) of elastically anisotropic chlorite has been suggested as one of the major causes of seismic anisotropy in subduction zones. However, there are two different LPOs of chlorite reported based on the previous studies of natural chlorite peridotites, which can produce different expression of seismic anisotropy. The mechanism for causing the two different LPOs of chlorite is not known. Therefore, we conducted deformation experiments of chlorite peridotite under high pressure–temperature conditions (P = 0.5–2.5 GPa, T = 540–720 °C). We found that two different chlorite LPOs were developed depending on the magnitude of shear strain. The type-1 chlorite LPO is characterized by the [001] axes aligned subnormal to the shear plane, and the type-2 chlorite LPO is characterized by a girdle distribution of the [001] axes subnormal to the shear direction. The type-1 chlorite LPO developed under low shear strain (γ ≤ 3.1 ± 0.3), producing trench-parallel seismic anisotropy. The type-2 chlorite LPO developed under high shear strain (γ ≥ 5.1 ± 1.5), producing trench-normal seismic anisotropy. The anisotropy of S-wave velocity (AVs) of chlorite was very strong up to AVs = 48.7% so that anomalous seismic anisotropy in subduction zones can be influenced by the chlorite LPOs.

scholarly journals Effects of Cenozoic subduction along the outboard margin of the Northern Cordillera: Derived from e-book on the Northern Cordillera (Alaska and Western Canada) and adjacent marine areas

Geosphere ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 33-61
Author(s):  
Warren J. Nokleberg ◽  
David W. Scholl ◽  
Thomas K. Bundtzen ◽  
David B. Stone
Keyword(s):  
Continental Margin ◽  
Subduction Zones ◽  
Hot Springs ◽  
Sedimentary Basins ◽  
Oceanic Lithosphere ◽  
Popular Science ◽  
Strike Slip ◽  
Western Canada ◽  
Regional Effects ◽  
Marine Areas

Abstract This article describes the regional effects of Cenozoic subduction along the outboard margin of the Northern Cordillera (Alaska, USA, and Western Canada), and thereby acquaints the reader with several chapters of the e-book Dynamic Geology of the Northern Cordillera (Alaska, Western Canada, and Adjacent Marine Areas). This article and the e-book are written for earth-science students and teachers. The level of writing for the article and the source e-book is that of popular science magazines, and readers are encouraged to share this article with students and laypersons. The main thrust of the article is to present and describe a suite of ten regional topographic, bathymetric, and geologic maps, and two figures portraying deep-crustal sections that illustrate the regional effects of Cenozoic subduction along the outboard margin of the North American Cordillera. The regional maps and cross sections are described in a way that a teacher might describe a map to students. Cenozoic subduction along the margin of the Northern Cordillera resulted in the formation of the following: (1) underthrusting of terranes and oceanic lithosphere beneath Southern Alaska; (2) landscapes, including narrow continental shelves along Southern and Southeastern Alaska and Western Canada (the Canadian Cordillera) and continental-margin mountain ranges, including the Alaska Peninsula, Chugach Range, Saint Elias Mountains, and Cascade Mountains; (3) sedimentary basins; (4) an array of active continental strike-slip and thrust faults (inboard of subduction zones); (5) earthquake belts related to subduction of terranes and oceanic plates; (6) active volcanoes, including continental-margin arcs (the Aleutian, Wrangell, and Cascade Arcs) linked to subduction zones, and interior volcanic belts related to strike-slip faulting or to hot spots; (7) lode and placer mineral deposits related to continental margin arcs or subduction of oceanic ridges; (8) hot springs related to continental-margin arcs; (9) plate movements as recorded from GPS measurements; and (10) underthrusting of terranes and oceanic lithosphere beneath the Northern Cordillera.

scholarly journals Peak ground acceleration at surface for Mataram city with a return period of 2500 years using probabilistic method

2018 ◽  
Vol 195 ◽  
pp. 03019
Author(s):  
Rian Mahendra Taruna ◽  
Vrieslend Haris Banyunegoro ◽  
Gatut Daniarsyad
Keyword(s):  
Seismic Hazard ◽  
Return Period ◽  
Peak Ground Acceleration ◽  
Subduction Zones ◽  
Amplification Factor ◽  
Hazard Analysis ◽  
Probabilistic Method ◽  
Seismic Zone ◽  
Ground Acceleration ◽  
Back Arc

The Lombok region especially Mataram city, is situated in a very active seismic zone because of the existence of subduction zones and the Flores back arc thrust. Hence, the peak ground acceleration (PGA) at the surface is necessary for seismic design regulation referring to SNI 1726:2012. In this research we conduct a probabilistic seismic hazard analysis to estimate the PGA at the bedrock with a 2% probability of exceedance in 50 years corresponding to the return period of 2500 years. These results are then multiplied by the amplification factor referred from shear wave velocity at 30 m depth (Vs30) and the microtremor method. The result of the analysis may describe the seismic hazard in Mataram city which is important for building codes.

Levensteiniella manusensis sp. nov., a new polychaete species (Annelida: Polynoidae) from deep-sea hydrothermal vents in the Manus Back-Arc Basin, Western Pacific

Zootaxa ◽  
2018 ◽  
Vol 4388 (1) ◽  
pp. 102 ◽  
Author(s):  
XUWEN WU ◽  
KUIDONG XU
Keyword(s):  
New Species ◽  
Deep Sea ◽  
Hydrothermal Vents ◽  
Western Pacific ◽  
Posterior Border ◽  
Polychaete Species ◽  
Males And Females ◽  
Back Arc ◽  
A New Species

A new species belonging to the subfamily Macellicephalinae (Annelida: Polynoidae), Levensteiniella manusensis sp. nov., is described based on material collected from deep-sea hydrothermal vents in the Manus Back-Arc Basin. The new species is readily distinguished from the congeners by having two pairs of ventral papillae on segments 11 and 12, the first pair of which is distally dichotomous. Levensteiniella manusensis is also characterized by the combination of the notochaetae which are smooth or serrated on the curved side, and the elytra with micro- and macropapillae on the surface and thickened bulbous projections on the posterior border. Based on morphological comparisons of the main features, we provide two keys to six species of Levensteiniella described to date based on males and females respectively. 

Sign in / Sign up

Export Citation Format

Share Document