Optimization of Pre-treatment Conditions of Water Hyacinth Leaf, Stem and Root for Bioethanol Production

2016 ◽  
Vol 15 (4) ◽  
pp. 1-10 ◽  
Author(s):  
O Adeyemi ◽  
O Olayebi
Keyword(s):  
Water Hyacinth ◽  
Bioethanol Production ◽  
Treatment Conditions ◽  
Pre Treatment

scholarly journals Bioethanol Production from UK Seaweeds: Investigating Variable Pre-treatment and Enzyme Hydrolysis Parameters

2019 ◽  
Vol 13 (1) ◽  
pp. 271-285 ◽  
Author(s):  
Emily T. Kostas ◽  
Daniel A. White ◽  
David J. Cook
Keyword(s):  
Large Scale ◽  
Method Development ◽  
Reaction Times ◽  
Enzyme Hydrolysis ◽  
Bioethanol Production ◽  
Laminaria Digitata ◽  
Treatment Conditions ◽  
Water Based ◽  
Ethanol Yields ◽  
Pre Treatment

Abstract This study describes the method development for bioethanol production from three species of seaweed. Laminaria digitata, Ulva lactuca and for the first time Dilsea carnosa were used as representatives of brown, green and red species of seaweed, respectively. Acid thermo-chemical and entirely aqueous (water) based pre-treatments were evaluated, using a range of sulphuric acid concentrations (0.125–2.5 M) and solids loading contents (5–25 % [w/v]; biomass: reactant) and different reaction times (5–30 min), with the aim of maximising the release of glucose following enzyme hydrolysis. A pre-treatment step for each of the three seaweeds was required and pre-treatment conditions were found to be specific to each seaweed species. Dilsea carnosa and U. lactuca were more suited with an aqueous (water-based) pre-treatment (yielding 125.0 and 360.0 mg of glucose/g of pre-treated seaweed, respectively), yet interestingly non pre-treated D. carnosa yielded 106.4 g g−1 glucose. Laminaria digitata required a dilute acid thermo-chemical pre-treatment in order to liberate maximal glucose yields (218.9 mg glucose/g pre-treated seaweed). Fermentations with S. cerevisiae NCYC2592 of the generated hydrolysates gave ethanol yields of 5.4 g L−1, 7.8 g L−1 and 3.2 g L−1 from D. carnosa, U. lactuca and L. digitata, respectively. This study highlighted that entirely aqueous based pre-treatments are effective for seaweed biomass, yet bioethanol production alone may not make such bio-processes economically viable at large scale.

scholarly journals Exogenous 5-azaCitidine accelerates flowering and external GA3 increases ornamental value in Iranian Anemone accessions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Vahideh Yari ◽  
Zeynab Roein ◽  
Atefeh Sabouri
Keyword(s):  
Morphological Characteristics ◽  
Flower Longevity ◽  
Cut Flowers ◽  
Stem Height ◽  
Flowering Stage ◽  
Potted Plants ◽  
Dormancy Period ◽  
Treatment Conditions ◽  
Number Of Leaves ◽  
Pre Treatment

AbstractThe Anemone genus is a tuberous geophyte which undergoes a dormancy period during unfavorable environmental conditions for growth. Five species of the Anemone genus naturally grow in several regions of Iran. The diverse uses of Anemone in gardens for landscaping, cut flowers, and potted plants indicate its high ornamental potential. Its dormancy and flowering are influenced by various factors. The present paper was conducted to explore the flowering behavior of Anemone accessions in response to different pre-treatments. For this purpose, tubers of 18 Anemone accessions (A. coronaria and A. biflora) were collected from natural regions of six provinces in Iran. These tubers were subjected to different conditions of non-chilling (20 °C, 90 days), chilling (4 °C, 90 days), GA3 (150 mgL-1; 24 h), and 5-azaCitidine (5-azaC; 40 µM; 24 h) prior to the cultivation. Most of the accessions were able to enter the flowering stage without chilling. The shortest period for the sprouting of tubers (16.89 ± 7.83 days) belonged to 5-azaC pre-treatment. In addition, this treatment accelerated the flowering time (about 30 days earlier) and diameter of the stem, bud, and flower. Morphological characteristics, such as stem height, number of leaves, bud, and petal and the longevity of flowers on the plant were significantly affected by GA3 pre-treatment. Our results indicated a positive correlation between flower length, stem height, and stem diameter with flower longevity under different pre-treatment conditions. The present study demonstrated that accessions Anm3, Anm12, and Anm18 had ornamental values higher than the population mean across four conditions.

Bioethanol Production of Cellulase Producing Bacteria from Soils of Agrowaste Field

2021 ◽  
Vol 13 (2) ◽  
pp. 643-655
Author(s):  
A. Thomas ◽  
M. Laxmi ◽  
A. Benny
Keyword(s):  
Treatment Process ◽  
Agricultural Waste ◽  
Cellulase Production ◽  
Cellulolytic Enzymes ◽  
Bioethanol Production ◽  
Ethanolic Fermentation ◽  
Cellulose Bioconversion ◽  
Congo Red Staining ◽  
Pre Treatment ◽  
And Staphylococcus Aureus

With decades of studies on cellulose bioconversion, cellulases have been playing an important role in producing fermentable sugars from lignocellulosic biomass. Copious microorganisms that are able to degrade cellulose have been isolated and identified. The present study has been undertaken to isolate and screen the cellulase producing bacteria from soils of agrowaste field. Cellulase production has been qualitatively analyzed in carboxy methylcellulose (CMC) agar medium after congo red staining and NaCl treatment by interpretation with zones around the potent colonies. Out of the seven isolates, only two showed cellulase production. The morphogical and molecular characterization revealed its identity as Escherichia coli and Staphylococcus aureus. The potential of organisms for bioethanol production has been investigated using two substrates, namely, paper and leaves by subjecting with a pre-treatment process using acid hydrolysis to remove lignin which acts as physical barrier to cellulolytic enzymes. Ethanolic fermentation was done using Saccharomyces cerevisiae for 24-48 h and then the bioethanol produced was qualitatively proved by iodoform assay. These finding proves that ethanol can be made from the agricultural waste and the process is recommended as a means of generating wealth from waste.

scholarly journals Comparison of Conventional and Novel Pre-treatment Methods for Bioethanol Production from Fruit and Vegetable Wastes

2020 ◽  
Vol 33 (4) ◽  
pp. 471-483
Author(s):  
Tugba Keskin
Keyword(s):  
Saccharomyces Cerevisiae ◽  
The Other ◽  
Yeast Fermentation ◽  
Bioethanol Production ◽  
Fruit And Vegetable ◽  
Bacterial Fermentation ◽  
Waste Gas ◽  
Clostridium Ljungdahlii ◽  
Vegetable Wastes ◽  
Pre Treatment

In this study, novel and conventional techniques for the production of bioethanol from fruit and vegetable wastes (FVWs) by yeast and bacterial fermentation were investigated experimentally. Different pretreatment techniques (acid, heat, acid/heat, and microwave) for yeast fermentation were compared. Maximum ethanol concentrations of 11.7 and 11.8 g L–1 were observed from acid/heat and microwave pretreatment, respectively, by using Saccharomyces cerevisiae. On the other hand, biochar production from FVWs and syngas fermentation from the waste gas of this process were integrated. From waste gas with 12 % CO content, 5.5 g L–1 and 2.5 g L–1 ethanol production was observed by using anaerobic mixed culture and Clostridium ljungdahlii, respectively. The overall results emphasize the potential of bioethanol production from FVWs by economically feasible and environmentally friendly methods.

scholarly journals Study of wheat straw delignification in a rotary-pulsation apparatus

2020 ◽  
pp. 103-110
Author(s):  
Larysa Sablii ◽  
Oleksandr Obodovych ◽  
Vitalii Sydorenko ◽  
Tamila Sheyko
Keyword(s):  
Wheat Straw ◽  
Production Technology ◽  
Raw Materials ◽  
Hydrolytic Enzymes ◽  
Bioethanol Production ◽  
Second Generation Bioethanol ◽  
Pulsation Apparatus ◽  
Rotary Pulsation Apparatus ◽  
Solid Water ◽  
Pre Treatment

This paper presents the results of studies of isolation lignin and hemicelluloses efficiency during the pre-treatment of wheat straw for hydrolysis in a rotary-pulsation apparatus. The pre-treatment of lignocellulosic raw materials for hydrolysis is a necessary step in the second-generation bioethanol production technology. The lignocellulose complex is destroyed during this process, and this allows hydrolytic enzymes access to the surface of cellulose fibers. The pre-treatment is the most energy-consuming stage in bioethanol production technology, since it usually occurs at high temperature and pressure for a significant time. One of the ways to improve the efficiency of this process is the use of energy-efficient equipment that allows intensifying heat and mass transfer. An example of such equipment is a rotary-pulsation apparatus, which are effective devices in stirring, homogenization, dispersion technologies, etc. The treatment of wheat straw in a rotary-pulsation apparatus was carried out under atmospheric pressure without external heat supply at solid/water ratios of 1:10 and 1:5 in the presence of alkali. It was determined that the treatment of the water dispersion of straw at ratio of 1:10 due to the energy dissipation during 70 minutes leads to the release of 42 % of lignin and 25.76 % of easily hydrolyzed polysaccharides. Changing the solid / water ratio from 1:10 to 1:5 leads to an increase in the yield of lignin and easily hydrolyzed polysaccharides to 58 and 33.38 %, respectively.

Optimisation of pre-treatment conditions for plantain (Musa parasidiaca) flour using Box-Behnken design

2018 ◽  
Vol 10 (3) ◽  
pp. 223-232
Author(s):  
G.J. Fadimu ◽  
L.O. Sanni ◽  
A.A. Adebowale ◽  
S.O. Kareem ◽  
O.P. Sobukola ◽  
...  
Keyword(s):  
Box Behnken Design ◽  
Treatment Conditions ◽  
Pre Treatment

Bioethanol Production by Pichia stipitis Immobilized on Water Hyacinth and Thin-Shell Silk Cocoon

2021 ◽  
Author(s):  
Suchata Kirdponpattara ◽  
Santi Chuetor ◽  
Malinee Sriariyanun ◽  
Muenduen Phisalaphong
Keyword(s):  
Water Hyacinth ◽  
Thin Shell ◽  
Immobilized Cells ◽  
High Surface ◽  
Pichia Stipitis ◽  
High Porosity ◽  
Bioethanol Production ◽  
Immobilized Cell ◽  
Silk Cocoon ◽  
Cell Carriers

Cell immobilization technique was applied in this study in order to examine effect of immobilized Pichia stipitis TISTR5806 on bioethanol production. Water hyacinth (WH) and thin-shell silk cocoon (CC) were used as cell carriers. Characteristics of the cell carriers were examined to explain the mechanism of bioethanol production. Carrier sizes and weights were optimized to improve bioethanol production. Moreover, stabilities of immobilized cells and carriers were evaluated. Because of high porosity, high surface area and good swelling ability of WH, cell immobilized on 1 g WH with 1 cm length produced the highest ethanol concentration at 13.3 g/L. Five cycles of a repeated batch of immobilized cell (IC) system on WH showed stable performance in ethanol production (8.2–10.4 g/L) with large numbers of the immobilized cells. The interaction between the immobilized cells and the WH surface were discovered.

Sign in / Sign up

Export Citation Format

Share Document