Rutting and Fatigue Cracking Resistance of Waste Cooking Oil (WCO) Modified Trinidad Asphaltic Materials

2021 ◽  
pp. 12-24
Author(s):  
Rean Maharaj ◽  
Vitra Ramjattan-Harry ◽  
Nazim Mohamed
Keyword(s):  
Fatigue Cracking ◽  
Waste Cooking Oil ◽  
Cracking Resistance ◽  
Cooking Oil ◽  
Asphaltic Materials

scholarly journals Rutting and Fatigue Cracking Resistance of Waste Cooking Oil Modified Trinidad Asphaltic Materials

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Rean Maharaj ◽  
Vitra Ramjattan-Harry ◽  
Nazim Mohamed
Keyword(s):  
Complex Modulus ◽  
Fatigue Cracking ◽  
Waste Cooking Oil ◽  
Cracking Resistance ◽  
Rutting Resistance ◽  
Cooking Oil ◽  
Attractive Option ◽  
Petroleum Bitumen ◽  
Resistance Decrease ◽  
Asphaltic Materials

The influence of waste cooking oil (WCO) on the performance characteristics of asphaltic materials indigenous to Trinidad, namely, Trinidad Lake Asphalt (TLA), Trinidad Petroleum Bitumen (TPB), and TLA : TPB (50 : 50) blend, was investigated to deduce the applicability of the WCO as a performance enhancer for the base asphalt. The rheological properties of complex modulus (G∗) and phase angle (δ) were measured for modified base asphalt blends containing up to 10% WCO. The results of rheology studies demonstrated that the incremental addition of WCO to the three parent binders resulted in incremental decreases in the rutting resistance (decrease inG∗/sinδvalues) and increases in the fatigue cracking resistance (decrease inG∗sinδvalue). The fatigue cracking resistance and rutting resistance for the TLA : TPB (50 : 50) blends were between those of the blends containing pure TLA and TPB. As operating temperature increased, an increase in the resistance to fatigue cracking and a decrease in the rutting resistance were observed for all of the WCO modified asphaltic blends. This study demonstrated the capability to create customized asphalt-WCO blends to suit special applications and highlights the potential for WCO to be used as an environmentally attractive option for improving the use of Trinidad asphaltic materials.

scholarly journals Full Recycling of Asphalt Concrete with Waste Cooking Oil as Rejuvenator and LDPE from Urban Waste as Binder Modifier

2020 ◽  
Vol 12 (19) ◽  
pp. 8222 ◽  
Author(s):  
Carlos Rodrigues ◽  
Silvino Capitão ◽  
Luís Picado-Santos ◽  
Arminda Almeida
Keyword(s):  
Asphalt Concrete ◽  
Mechanical Performance ◽  
Global Analysis ◽  
Low Cost ◽  
Fatigue Cracking ◽  
Waste Cooking Oil ◽  
Asphalt Mixtures ◽  
Urban Waste ◽  
Cooking Oil ◽  
Water Sensitivity

Some research projects have studied full recycling of reclaimed asphalt pavement (RAP). Several additives have been used to rejuvenate the RAP’s aged bitumen. The authors previously studied full recycling of RAP rejuvenated with waste cooking oil (WCO). The asphalt concrete (AC) manufactured revealed good mechanical behaviour except for rutting resistance. Therefore, they decided to also include in the asphalt mixtures low density polyethylene (LDPE) from urban waste as a low-cost polymer to improve that weak point and verify if this technique was feasible and with potential as a pavement material. A laboratory plan was conceived to evaluate the mechanical performance of two rejuvenated ACs with WCO and LDPE. Stiffness, water sensitivity, resistance to rutting and fatigue cracking were evaluated. The results showed that, despite some empirical parameters usually indicated in current specifications not being met, the performance of the studied asphalt mixtures was adequate and, thus, there are good expectations about the future use of these solutions in real pavements, particularly for low and intermediate traffic levels. Based on a global analysis of the performance observed, the main conclusion was that full recycling of AC with WCO and LDPE is feasible, and the score obtained was higher than that of a conventional AC used for comparison.

Estimation of Recoverable Household Waste Cooking Oil and Life Cycle Analysis of Biodiesel Fuel Production

2008 ◽  
Vol 4 (4) ◽  
pp. 318-323 ◽  
Author(s):  
Hirotsugu KAMAHARA ◽  
Shun YAMAGUCHI ◽  
Ryuichi TACHIBANA ◽  
Naohiro GOTO ◽  
Koichi FUJIE
Keyword(s):  
Life Cycle ◽  
Life Cycle Analysis ◽  
Waste Cooking Oil ◽  
Household Waste ◽  
Biodiesel Fuel ◽  
Fuel Production ◽  
Cooking Oil

Synthesis and Characterization of Heterogeneous Solid Acid Catalyst from Alstonia Scolaris Stalks for Biodiesel Production using Waste Cooking Oil

2020 ◽  
Vol 10 ◽  
Author(s):  
Charishma Venkata Sai Anne ◽  
Karthikeyan S. ◽  
Arun C.
Keyword(s):  
Reaction Time ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Wood Biomass ◽  
Waste Wood ◽  
X Ray ◽  
Cooking Oil

Background: Waste biomass derived reusable heterogeneous acid based catalysts are more suitable to overcome the problems associated with homogeneous catalysts. The use of agricultural biomass as catalyst for transesterification process is more economical and it reduces the overall production cost of biodiesel. The identification of an appropriate suitable catalyst for effective transesterification will be a landmark in biofuel sector Objective: In the present investigation, waste wood biomass was used to prepare a low cost sulfonated solid acid catalyst for the production of biodiesel using waste cooking oil. Methods: The pretreated wood biomass was first calcined then sulfonated with H2SO4. The catalyst was characterized by various analyses such as, Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray diffraction (XRD). The central composite design (CCD) based response surface methodology (RSM) was applied to study the influence of individual process variables such as temperature, catalyst load, methanol to oil molar ration and reaction time on biodiesel yield. Results: The obtained optimized conditions are as follows: temperature (165 ˚C), catalyst loading (1.625 wt%), methanol to oil molar ratio (15:1) and reaction time (143 min) with a maximum biodiesel yield of 95 %. The Gas chromatographymass spectrometry (GC-MS) analysis of biodiesel produced from waste cooking oil was showed that it has a mixture of both monounsaturated and saturated methyl esters. Conclusion: Thus the waste wood biomass derived heterogeneous catalyst for the transesterification process of waste cooking oil can be applied for sustainable biodiesel production by adding an additional value for the waste materials and also eliminating the disposable problem of waste oils.

Novel approaches for the production of bio-diesel using waste vegetable oil

2014 ◽  
Vol 3 (10) ◽  
pp. 3419
Author(s):  
Mohan Reddy Nalabolu* ◽  
Varaprasad Bobbarala ◽  
Mahesh Kandula
Keyword(s):  
Diesel Fuel ◽  
Oxidation Stability ◽  
Acid Value ◽  
Waste Cooking Oil ◽  
Flash Point ◽  
Carbon Residue ◽  
Fuel Properties ◽  
Present Moment ◽  
Total Acid ◽  
Cooking Oil

At the present moment worldwide waning fossil fuel resources as well as the tendency for developing new renewable biofuels have shifted the interest of the society towards finding novel alternative fuel sources. Biofuels have been put forward as one of a range of alternatives with lower emissions and a higher degree of fuel security and gives potential opportunities for rural and regional communities. Biodiesel has a great potential as an alternative diesel fuel. In this work, biodiesel was prepared from waste cooking oil it was converted into biodiesel through single step transesterification. Methanol with Potassium hydroxide as a catalyst was used for the transesterification process. The biodiesel was characterized by its fuel properties including acid value, cloud and pour points, water content, sediments, oxidation stability, carbon residue, flash point, kinematic viscosity, density according to IS: 15607-05 standards. The viscosity of the waste cooking oil biodiesel was found to be 4.05 mm2/sec at 400C. Flash point was found to be 1280C, water and sediment was 236mg/kg, 0 % respectively, carbon residue was 0.017%, total acid value was 0.2 mgKOH/g, cloud point was 40C and pour point was 120C. The results showed that one step transesterification was better and resulted in higher yield and better fuel properties. The research demonstrated that biodiesel obtained under optimum conditions from waste cooking oil was of good quality and could be used as a diesel fuel.

Reprogramming Escherichia coli Metabolism for Bioplastics Synthesis from Waste Cooking Oil

2021 ◽  
Author(s):  
Yang Li ◽  
Zhenzhen Cheng ◽  
Chunlei Zhao ◽  
Cong Gao ◽  
Wei Song ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Waste Cooking Oil ◽  
Cooking Oil
Sign in / Sign up

Export Citation Format

Share Document