Dynamics Modelling and Control of a Novel Fuel Metering Valve Actuated by Two Binary-Coded Digital Valve Arrays

A fuel metering valve actuated by two binary-coded digital valve arrays (BDVAs) is proposed to improve the reliability of conventional fuel metering valves piloted by a servo valve. The design concept of this configuration is obtained from the structural characteristics of the dual nozzle-flapper and the flow regulation method of the digital hydraulic technology. The structure and working principle of the fuel metering valve are presented. Then, a mathematical model of the entire valve is developed for dynamic analysis. Subsequently, the mechanism of the transient flow uncertainty of the BDVA is revealed through simulation to determine the fluctuation in the velocity of the fuel metering valve. Furthermore, step response indicates that the delay time of the fuel metering valve is within 4.1 ms. Finally, to improve the position tracking accuracy of the fuel metering valve, a velocity feedforward proportional-integral controller with pulse code modulation is proposed. A series of comparative analyses indicate that compared with those of the velocity feedforward controller, the average and standard deviation of the position error for the proposed controller are reduced by 78 and 72.7%, respectively. The results prove the feasibility of the proposed valve and the effectiveness of the proposed control strategy.

DETERMINATION OF THE ACOUSTO-OPTICAL DEFLECTOR PARAMETERS FOR A LASER-RADIATION ROCKET GUIDANCE SYSTEM

The work is devoted to the development of an acousto-optic deflector for a laser-beam guidance system (LLSN) of missiles. LLSN is used in semiautomatic portable missile systems to destroy hostile targets of various types. An analysis of the methods for constructing such systems has shown that the most promising devices with pulse-code modulation using semiconductor pulsed lasers. The article provides a diagram and describes the principle of operation of the LLSN with pulse-code modulation. A problematic issue in the implementation of such a system is the development of a device for deflecting a laser beam, through which the missile is guided to a target. Scanning mechanical devices that are currently in use have a complex design, significant dimensions and weight, and limited performance. The article proposes to use an acousto-optic deflector to deflect the laser beam within the information field of the guidance system, which is devoid of these disadvantages, since it replaces the mechanical scanning device with an electronic one. The purpose of the article is to determine the main parameters of the acousto-optical deflector. The article discusses the principle of operation of an acousto-optic deflector. It is noted that glasses based on germanium chalcogenides, in particular, glass with the composition Ge2.17As39.13S58.70, have especially low values of acoustic losses (α <1 dB / cm). The largest deflection angle of the laser beam will be observed with Bragg diffraction. Relationships are given that can be used to determine the main characteristics of the deflector: the angle of deflection of the laser beam, the modulation frequency of the acoustic wave, resolution, speed, and others. When using the above ratios for the typical parameters of the existing guidance system, the values of the indicated characteristics are calculated.

Investigation of a Digital Hydraulic Valve Operated by Servo Motors

This paper describes a new type of digital hydraulic valve run by two servo motors. Digital hydraulics is a cutting-edge technology, which saves more exhausted energy than conventional hydraulic valves. It includes conventional valves, but its working principle is different. Similar or different size valves constitute a digital hydraulic valve assembly. When the assigned valves are opened, a certain amount of flow is obtained from the output of the valve assembly. To control a digital hydraulic valve, Pulse Number Modulation (PNM) Control technique is used for equal valve flow rates, while Pulse Code Modulation (PCM) is used for different valve flow rates. Valves are exerted by independently launched electric coils. Previous studies used controller board and external power booster circuits for coils. In this study, a new type of digital hydraulic valve is designed, manufactured, and tested with the PNM method. The studied valve body has two different valve groups. Every group includes 16 equal valves and 1 camshaft rotated by 1 servo motor. The servo motors are controlled by a PLC. The calculated performance index is found to be 5.1ms which is similar to the results of previous studies. The experimental results showed that the cam and servo motor controlled digital hydraulics is applicable to variable speed control hydraulic systems.

Lossless Compression Algorithm and Architecture for Reduced Memory Bandwidth Requirement with Improved Prediction Based on the Multiple DPCM Golomb-Rice Algorithm

In a computing environment, higher resolutions generally require more memory bandwidth, which inevitably leads to the consumption more power. This may become critical for the overall performance of mobile devices and graphic processor units with increased amounts of memory access and memory bandwidth. This paper proposes a lossless compression algorithm with a multiple differential pulse-code modulation variable sign code Golomb-Rice to reduce the memory bandwidth requirement. The efficiency of the proposed multiple differential pulse-code modulation is enhanced by selecting the optimal differential pulse code modulation mode. The experimental results show compression ratio of 1.99 for high-efficiency video coding image sequences and that the proposed lossless compression hardware can reduce the bus bandwidth requirement.

Color image compression based on spatial and magnitude signal decomposition

<p>In this paper, a simple color image compression system has been proposed using image signal decomposition. Where, the RGB image color band is converted to the less correlated YUV color model and the pixel value (magnitude) in each band is decomposed into 2-values; most and least significant. According to the importance of the most significant value (MSV) that influenced by any simply modification happened, an adaptive lossless image compression system is proposed using bit plane (BP) slicing, delta pulse code modulation (Delta PCM), adaptive quadtree (QT) partitioning followed by an adaptive shift encoder. On the other hand, a lossy compression system is introduced to handle the least significant value (LSV), it is based on an adaptive, error bounded coding system, and it uses the DCT compression scheme. The performance of the developed compression system was analyzed and compared with those attained from the universal standard JPEG, and the results of applying the proposed system indicated its performance is comparable or better than that of the JPEG standards.</p>

Improvement of Power Consumption in Wireless Body Area Networks by PCM Sampling ​

Due to the aging population and the growing need for hospitals and care for the elderly and limited hospital resources, the need for a mechanism that can handle the limited hospital resources is felt more than ever. Wireless Body Area networks are one of the technologies that monitor people's health remotely, thus avoiding unnecessary hospitalization and thus managing resource constraints. Wireless Body Area Networks (WBANs) face with energy limitations. The battery in WBANs has limited energy. However, it is not possible to replace or charge batteries in many of these networks. Therefore, it is needed to save energy and extend network life. One of the important methods that have been proposed for this purpose is sampling rate management-based methods. In this paper due to the efficiency of the sampling rate management, an efficient sampling rate method has been proposed. For this purpose to minimize unnecessary data transmission, Flat- Top Pulse Amplitude Modulated (PAM) method has been used. Then in order to make the signal from PAM suitable for data transmission, Pulse Code Modulation (PCM) method to digitize the pulses has been used. Finally, the results and outputs show that significant energy savings have been achieved. The results showed that data transmission is reduced by up to 92.7% and energy saving is achieved significantly

A Comparative Analysis of Image Compression using PCM and DPCM

The quality of the signal is essential in digital communication and signal processing. The transmission channel is also important. Modulation is used for effectively transmission of signal. There exist several types of modulation techniques. One of such is the pulse code modulation (PCM). The performance of PCM is however affected by quantization error and noise in the transmission channel, which affects the quality of the output. Against this backdrop, this paper presents the use of differential pulse code modulation (DPCM) so as to address the limitation of pulse code modulation. The simulation environment is MATLAB 2018a. The MATLAB Simulink is used to design the PCM and DPCM systems using appropriate digital processing blocks. The DPCM system shows a significant improvement in terms of error reduction and quality of output.

High dynamic digital control for a hydraulic cylinder drive

The control of hydraulic cylinders with digital hydraulic valves is often based on modulation principles like pulse-width modulation, pulse-code modulation, or pulse–frequency control. In many cases the dynamic drive performance using such control strategies is far below the natural dynamics of the system, since closed-loop controllers demand a certain phase margin for stability. However, some drive applications require a high dynamic response, which cannot be realized with common closed-loop concepts. In this article the design of a bang–bang feedforward control with regard to the dynamics of a hydraulic cylinder drive in accordance with the theory of optimal control is presented. The control achieves the maximum physical dynamic response and no remaining oscillations after the movement, which forms the basis of a high dynamic three-level position control for hydraulic drives. Furthermore, the influence of valve dynamics and pipe line dynamics with regard to the design of the digital valve control are considered by simulations.

Stream-Based Visually Lossless Data Compression Applying Variable Bit-Length ADPCM Encoding

Video applications have become one of the major services in the engineering field, which are implemented by server–client systems connected via the Internet, broadcasting services for mobile devices such as smartphones and surveillance cameras for security. Recently, the majority of video encoding mechanisms to reduce the data rate are mainly lossy compression methods such as the MPEG format. However, when we consider special needs for high-speed communication such as display applications and object detection ones with high accuracy from the video stream, we need to address the encoding mechanism without any loss of pixel information, called visually lossless compression. This paper focuses on the Adaptive Differential Pulse Code Modulation (ADPCM) that encodes a data stream into a constant bit length per data element. However, the conventional ADPCM does not have any mechanism to control dynamically the encoding bit length. We propose a novel ADPCM that provides a mechanism with a variable bit-length control, called ADPCM-VBL, for the encoding/decoding mechanism. Furthermore, since we expect that the encoded data from ADPCM maintains low entropy, we expect to reduce the amount of data by applying a lossless data compression. Applying ADPCM-VBL and a lossless data compression, this paper proposes a video transfer system that controls throughput autonomously in the communication data path. Through evaluations focusing on the aspects of the encoding performance and the image quality, we confirm that the proposed mechanisms effectively work on the applications that needs visually lossless compression by encoding video stream in low latency.