The sustainability of beach nourishments: a review of nourishment and environmental monitoring practice

Beach nourishments are a widely used method to mitigate erosion along sandy shorelines. In contrast to hard coastal protection structures, nourishments are considered as soft engineering, although little is known about the cumulative, long-term environmental effects of both marine sediment extraction and nourishment activities. Recent endeavours to sustain the marine ecosystem and research results on the environmental impact of sediment extraction and nourishment activities are driving the need for a comprehensive up-to-date review of beach nourishment practice, and to evaluate the physical and ecological sustainability of these activities. While existing reviews of nourishment practice have focused on the general design (motivation, techniques and methods, international overview of sites and volumes) as well as legal and financial aspects, this study reviews and compares not only nourishment practice but also the accompanying assessment and monitoring of environmental impacts in a number of developed countries around the world. For the study, we reviewed 205 openly-accessible coastal management strategies, legal texts, guidelines, EIA documents, websites, project reports, press releases and research publications about beach nourishments in several developed countries around the world (Germany, Denmark, the Netherlands, Belgium, Spain, UK, USA and Australia). Where information was not openly available, the responsible authorities were contacted directly. The study elaborates on the differences in coastal management strategies and legislation as well as the large dissimilarities in the EIA procedure (where applicable) for both marine sediment extraction and nourishment activities. The spatial disturbance of the marine environment that is considered a significant impact, a factor which determines the need for an Environmental Impact Assessment, varies substantially between the countries covered in this study. Combined with the large uncertainties of the long-term ecological and geomorphological impacts, these results underline the need to reconsider the sustainability of nourishments as “soft” coastal protection measures.

Morphological Changes of the Lower Tedori River, Japan, over 50 Years

Long-term variation in the morphological characteristics of rivers is complicated as a result of temporally and spatially variable natural processes and anthropogenic disturbances. Better understanding of their relationship is therefore important for river basin management. The present study conducted a detailed analysis of a long-term dataset consisting of a 58-year topographic survey and related data on human impact to clarify the long-term variation in the morphological characteristics of the lower Tedori River in Japan. An empirical model was established through the assessment of spatiotemporal variations in nonlinear rates of adjustment. The results indicated that sediment extraction and dam construction profoundly affected the morphological characteristics of the lower Tedori River and that the vertical adjustment of the river channel experienced five phases. Degradation occurred from 7 to 16 km upstream from the river mouth over all phases. Two aggradation phases following two degradation phases were observed from the river mouth to 2 km upstream. Aggradation and degradation phases appeared alternately from 2 to 7 km. The representative nonlinear rates of vertical adjustment in the second phase were the highest compared with those in the other phases in the entire reach. The correlation analysis revealed that the incision phase was mostly coupled with channel narrowing, while widening followed the deposition phase. It was deduced from aerial photo analysis and a comparison between slope and empirical critical slope that the pattern in the lower Tedori River was braided during the period 1950–2000.

Proposal of industrialization process of dredged sediments

Our study will focus on life cycle assessment (LCA) of dredged sediments in its environment from sediment extraction to waste treatment. This tool is part of an environmental management approach, to compare the environmental loads of the different stages of the life cycle of the same product and to deduce which stage of the scenario is the most polluting in environmental terms. Optimize the modeling of industrialization process of dredged sediments using the SimaPro 8.2.3 software to propose a model that is the most respectful of the environment. We will focus on the environmental impacts; we will try to propose the most environmentally friendly scenario to exploit these dredged sediments in the field of building construction.

Experimental Study of Push Coring Forces During Sediment Extraction Using a Robot Manipulator

This work addresses the experimental study of the forces exerted during the extraction of sediment samples using push corers. The study aims to measure push and pull forces under different deployment conditions for corer speed and coring depth using sand, sandy silt and silt as sediment. To guarantee a repeatable automated process, a KUKA KR6 robot manipulator was used to extract the sample. The forces were measured using a bidirectional S-type load cell. The required data is extracted from the robot’s internal variables log and from the load cell’s data acquisition system. The raw data is processed to develop simplified models for the forces using linear regression which are further analyzed and tested. Finally, the results obtained are discussed in the context of core sampling and practical conclusions are drawn from the experiments.

The sediment of the Hostivar Reservoir (Prague, Czech Republic) as a memory of 45 years of pollution

Purpose The purpose of this paper is to evaluate the historical pollution of the Hostivar Reservoir (largest reservoir in Prague) sediment by metals, polyaromatic hydrocarbons (PAH) and polychlorinated biphenyls (PCB) and identify the trends in pollution of aquatic environment. Design/methodology/approach Core samples, 140 cm long, recording the 45-year history of the reservoir, were separated to 5 cm width subsamples (approximately 1.5 years of sedimentation) and analyzed for metals (Cd, Pb, Cu, Zn, Cr, Ni, Al), PAH and PCB. Following methods were used: US EPA 3051 for metals, US EPA 505 and US EPA 8082 A for PCB, and ISO 18287:2006 for PAH. Findings Most of the contaminants had the highest concentration at the beginning of the existence of the reservoir, suggesting that the contamination results from construction activities. Significant decrease of Pb occurred in the second half of the 1990s. It was caused by termination of the addition of lead as a detonation suppressant to the gasoline. Most concentrations of PAHs, PCBs and metals, except copper do not present eco-toxicological risk. Practical implications The results show the volume of priority pollutants removed from the reservoir by sediment extraction, and point risk to the terrestrial environment due to application of the sediment in the construction of a noise protecting wall. Originality/value The paper presents unique data about historical contamination of the largest reservoir in Prague, the capital of Czech Republic. It shows how the watershed and the construction phase of the dam cause a pollution of the reservoir sediment and possible environmental risk for aquatic biota.