The damage caused by wind in middle-aged Scots pine stands on permanent thinning experimental plots

In July 2002, the very strong hurricane appeared in northern Poland, which caused destruction of forest cover of area more than 10,000 ha. The permanent thinning research plot in a 53-year-old pine stand located in Myszyniec forest district (150 km north of Warsaw) was lying on the edge of damaged area. The following treatments were tested on this plot: 1) control plot (without thinning); 2) schematic cut in 20-year-old stand, selective thinning to 40 years, then thinning from below; 3) schematic cut in 20-year-old stand, then selective thinning; 4) selective thinning in young stand (20–40 years), then thinning from below and 5) selective thinning all the time. A significant part of this plot was completely destroyed and in the other part of the plot, some trees survived. A small part of the plot resisted the wind attack. An analysis of the amount of destroyed trees (measured by basal area) showed no differences between particular silvicultural treatments. The level of damage differed between particular parts of the plot. Another plot located in Ostrów Mazowiecka forest district (100 km NE of Warsaw) with the same thinning treatments was touched by heavy wind in July 2011 when the stand was 62 years old. Unlike the hurricane of 2002, this storm did not destroy the experimental plot which was located outside the zone of heaviest calamity. Therefore, damage on this plot had point and group character. Although on particular measurement units, share of broken or fallen trees did not exceed 10% of total basal area, it can be observed that the lowest level of damage was noticed on plots with selective thinning in young age and thinning from below in older stand.

Cutlink Cleaning Head with a Spreading Feature for Biological Sprout Control

The ability of deciduous trees to sprout efficiently after cutting is problematic in young forests where the target is to cultivate coniferous trees for industry. Since the use of chemicals has been restricted, new alternatives are needed. One potential and environmentally friendly option is biological sprout control that is based on the use of a white-rot fungus, Chondrostereum purpureum (Pers. Ex Fr.) Pouzar. This method has been efficient in earlier investigations when performed manually, but efficient, fully mechanized devices which are able to cut and treat stumps with a fungus are still unavailable. Therefore, the efficacy of biological sprout control conducted with a Cutlink cleaning head equipped with a spreading feature was studied in two young Norway spruce (Picea abies (L.) H. Karst.) forests in central Finland.Sample plots for the control (cutting deciduous saplings only) and fungal treatment (cutting and spreading fungal inoculum on fresh stump surfaces) were established, and the ability of the Cutlink cleaning head in preventing sprouting of silver and downy birch (Betula pendula Roth and B. pubescens Ehrh., respectively) in the sample plots was investigated for two years.In the near vicinity of cultivated Norway spruce, the proportion of cut deciduous saplings varied from 50–60% after the Cutlink operation. The average mortality of silver and downy birch stumps in the fungal treatment plots was ca. 40%, while stump mortality in the control, i.e., cutting only, was only ca. 13%, after two years. Stump mortality increased up to 73% if the stumps did not include old branches, i.e., the stump was cut to a low enough height.These results confirmed that the Cutlink cleaning head is a potential tool in young stand management operation but further development will be needed in working methods in order to achieve lower stump heights (no branches on the stump) and also to increase the proportion of cut saplings.

The complex of machines for low-cost artificial reforestation in the taiga zone

Problems of mechanization of artificial reforestation in the taiga zone are increasing the productivity of manual labour and reducing the costs of subsequent young stand treatment (early tending and early pre-commercial thinning). Petrozavodsk State University has developed the complex of machines and technologies capable to solve these problems. This complex includes: seeder, root-cutter, dynamic hole-maker and mechanical mounder. Seeder and root-cutter are intended for growing enlarged seedlings with an open root system in forest nurseries. Seeder provides mechanization of sowing seeds. Root-cutter is used for pruning the root systems of seedlings during cultivation. Dynamic hole-maker provides strip soil clearing, surface tillage and preparation of holes for manual planting of seedlings. The hole-maker is also capable to make soil scarification and sowing forest seeds. Mechanical mounder provides strip clearing in the forest plot and creation of humus mounds with mineral soil cover for manual planting of seedlings. Basic technological parameters of the complex of machines have been also substantiated at the Petrozavodsk State University.

Digital Transformation of Forest Services in Finland—A Case Study for Improving Business Processes

This case study introduces an innovation and development concept for agile software tools for the improvement of the productivity and customer experience of forest services. This need was recognized in the context of the opening of forest data and the development of service platforms for a forest-based bioeconomy in Finland. The forest services that were studied covered a continuum from a single type of work, e.g., soil preparation and young stand management through timber procurement, to comprehensive forest property management services. The study concentrated on the needs of micro-, small, and medium-sized enterprises (SMEs), which provide either retail- or business to business (B2B) services as sub-contractors. In addition, the challenges and bottlenecks in service processes detected by other stakeholders were considered. The prevailing service processes were conceptually modelled in order to search for opportunities for improvements in business and ecosystem services, i.e., agile software concepts. For example, we examined whether it would be possible to create opportunities for flexible operational models for precision, resilience, and protection of valuable microsites in forests. These software concepts were developed and evaluated in co-operation with the stakeholders in a co-creative workshop. The technological feasibility and commercial viability of the concepts, as well as the desirability for the customer were considered. The results of this business development process—i.e., agile software concepts and their anticipated benefits—were provided for further evaluation. In addition to the practical implications of this kind of innovation process tested, the potential of these kinds of agile tools for the further development of knowledge-intensive service processes was further discussed.

Effects of Selection Regime on Invasive Characteristics in an Emerging Biomass Crop, Switchgrass (Panicum virgatum L.)

Production of biomass feedstock crops could produce substantial environmental benefits, but these will be sharply reduced if these crops become invasive. Switchgrass (Panicum virgatum L.) is being bred for biomass production; these selective efforts may enhance invasive traits. To inform the assessment of invasive risk, undomesticated switchgrass strains were used as a baseline for comparison with strains bred for biomass production. In a three-year field experiment, we compared juvenile plant densities and survival, persistence of established plants, and aboveground biomass between selectively bred (cultivar) and undomesticated switchgrass strains. Cultivars had modestly greater third-year biomass and first-year plant densities than commercial ecotypes but lower survival and persistence; consequently, third-year plant densities did not significantly differ between cultivars and commercial ecotypes. Higher initial establishment and subsequent self-thinning in cultivars resulted in stands that were similar to those of commercial ecotypes. Therefore, our results do not suggest that the breeding of current cultivars of switchgrass enhanced juvenile and young-stand traits associated with invasiveness. Because biomass yields were not greatly different between cultivars and commercial ecotypes, use of the latter in biomass grasslands could provide functional benefits, including an enhanced habitat for native biodiversity and reduced pathogen loads, without incurring large losses in biomass production.

Patterns of Carbon Sequestration in a Young Forest Ecosystem after Clear-Cutting

A large area of Estonian hemiboreal forest is recovering from clear-cut harvesting and changing carbon (C) balance of the stands. However, there is a lack of information about C- source/sink relationships during recovery of such stands. The eddy covariance technique was used to estimate C-status through net ecosystem exchange (NEE) of CO2 in two stands of different development stages located in southeast Estonia in 2014. Measured summertime (June–September) mean CO2 concentration was 337.75 ppm with mean NEE −1.72 µmol m−2 s−1. June NEE was −4.60 µmol m−2 s−1; July, August, and September NEE was −1.17, −0.77, and −0.25 µmol m−2 s−1, respectively. The two stands had similar patterns of CO2 exchange; measurement period temperature drove NEE. Our results show that after clear-cutting a 6-year-old forest ecosystem was a light C-sink and 8-year-old young stand demonstrated a stronger C-sink status during the measurement period.

PERIODS OF ACTIVITY DERMACENTOR RETICULATUS IN THE TAIGA ZONE

The range of D. reticulatus ticks mainly covers forest-steppe and steppe, where they occupy open spaces. The discovery of high-abundance populations of this tick in the taiga zone is a rare phenomenon. On the outskirts of the city of Tomsk, on the coastal slope of the Tom River of the south-southwestern exposure, such a population was found in 2015. In 2018, this species was also found on the slope of the southern exposure, on the outskirts of the city, which has a very rare young stand. In contrast to the coastal slope, people practically did not appear here, which made it possible to trace the natural dynamics of the population and, using marks, determine the duration of their life. Here, mites appeared on the surface immediately after the snow melted. The spring period of activity lasted until the end of June, then during July there was a summer diapause, and in the beginning of August the autumn period of activity began. The number in spring was higher than in autumn. The life span, as shown by the tagging, in this area, is no more than 1 year.

Harvesting Design by Capital Return

One can suspect that capital return rate in forestry can be maximized by growing trees experiencing a value-adding assortment transition. Such a situation may or may not endure. We investigate the financial feasibility of a few harvesting schedules for a semi-shade-tolerant tree species. Some example stands have experienced commercial low thinning, whereas others have experienced young stand cleaning only. High thinning is computationally combined with quality thinning, and further growth of trees is estimated using an applicable growth model. High capital return rates are gained by diameter-limit cutting to the transition diameter between pulpwood and sawlogs. Repeated thinnings lead to a reduction in the capitalization during several decades, the system approaching a stationary state. The transient forest stands investigated show a significant excess capital return, in relation to the stationary state, and this excess return is due to transient tree size distribution. Correspondingly, capital return rate gained in rotation forestry is somewhat higher than that of stationary continuous-cover forestry, and the volumetric yield is much higher. The productive capacity of stands previously thinned from below has been apparently ruined by that treatment.

Thinning Schedules for Spruce Stands

We investigate financial feasibility of a few thinning schedules for spruce stands. Some example stands have previously experienced commercial low thinning, whereas others young stand cleaning only. High thinning is combined with quality thinning, and further growth of trees is estimated using a Norwegian growth model. High capital return rates are gained by diameter-limit cutting to the transition diameter between pulpwood and sawlogs. Repeated thinnings lead to reduction in the capitalization during several decades, the system approaching a stationary state. The transient forest stands investigated shown a significant excess capital return, in relation to the stationary state, and this excess return is due to transient tree size distribution. Correspondingly, capital return rate gained in rotation forestry is somewhat higher than that of stationary continuous-cover forestry, and the volumetric yield is much higher. The productive capacity of stands previously thinned from below apparently has been ruined by that treatment.