Mechanical Properties and Microstructure Evolution of Cemented Tailings Backfill Under Seepage Pressure

Cemented tailing backfill (CTB) in underground mine inevitably experiences seepage field, which complicates its mechanical behavior. In this study, the mechanical properties and microstructure characteristics of CTB under different seepage water pressures (SWPs) were investigated. The results show that, with the increase in SWP, the mechanical properties of CTB decrease, but the decreasing trend reduces gradually. Higher SWP leads the microstructure of CTB looser and more porous, and the largest proportion of pores initiated and propagated by SWP is micropores, which means the damage in CTB under seepage is mostly caused by micropores. Besides, the mechanical properties of CTB under seepage decrease exponentially with the increase in porosity and present linearly inverse proportional relation to the pore area fractal dimension. Results above indicate that SWP has a significant deterioration effect on the mechanical properties and microstructure of CTB. The research could not only extend the knowledge of mechanical properties and microstructure characteristics of CTB under seepage but also provide a theoretical reference for mechanical index determination and stability analysis of CTB in water-rich underground mines.

Strength Deterioration Mechanism of Bentonite Modified Loess After Wetting- Drying Cycles

The employment of bentonite modified loess (BML) is a common method of constructing the anti-seepage lining of landfills in the loess region of China, and its long-term secure performance is threatened by wetting-drying (W-D) cycles. Taking the remolded loess (RL) and BML with 15% in mass of bentonite as research objects, the W-D cycles test, scanning electron microscope (SEM) test and direct shear test were carried out to analyze the effects of W-D cycles on the microstructure and shear strength of samples. The regression equations between strength and micro-pore structure parameters were established by the multivariate linear stepwise regression method. The damage mechanism of BML after W-D cycles was studied by establishing damage degree models based on pore area ratio and cohesion. Results indicate that the water absorption and expansion of bentonite effectively block the intergranular pores, resulting in more medium and small pores and more pronounced surface contact of particles. After W-D cycles, the particle arrangement of samples before and after bentonite modification tends to be loose. Both the pore area ratio and fractal dimension increase and tend to stabilize after five cycles. The BML exhibits lower pore area ratio and greater fractal dimension while its cohesion and internal friction angle show more significant decrease after W-D cycles than those of RL. The damage variables based on pore area ratio and cohesion well describe the W-D induced damage of loess before and after modification from macro- and micro-scale perspectives. The damage degree of samples increases with W-D cycles, but the increment decreases.

Study on Micro-Characteristics of Microbe-Induced Calcium Carbonate Solidified Loess

Microbial-induced carbonate precipitation (MICP) has outstanding characteristics in solidifying soil, such as good fluidity, ecological environmental protection, adjustable reaction, etc., making it have a good application prospect. As a typical silty clay, the composition of loess is fine, and the microstructure is quite different from that of sand. Previous research has found that the unconfined compressive strength of loess cured by MICP can be increased by nearly four times. In this paper, by comparing the changes of structural characteristics of undisturbed loess before and after MICP solidification, the mechanism of strength improvement of loess after MICP solidification is revealed from the microscopic level. Firstly, the microstructure of loess before and after solidification is tested by scanning electron microscope, and it is found that the skeleton particles of undisturbed loess are granular, and the soil particles coexist in direct contact and indirect contact, and the pores in soil are mainly overhead pores compared with the microstructure of solidified loess, it is found that the surface contact between aggregates increases obviously, and calcium carbonate generated by MICP is adsorbed around the point contact between aggregates, which makes the contact between soil particles change from point contact to surface contact. Then, Pores (Particles) and Cracks Analysis System (PCAS) is used to quantitatively analyze the pores of loess before and after solidification. The results show that the total pore area, the maximum total pore area and porosity of soil samples decrease, and the total number of pores decreases by 13.2% compared with that before MICP solidification, indicating that a part of calcium carbonate produced by MICP reaction accumulates in tiny pores, thus reducing the number of pores. One part is cemented between soil particles, which increases the contact area of particles. Therefore, some pores of loess solidified by MICP are filled and densified, the contact area between soil particles is increased, and the strength of loess under load is obviously improved.

Hierarchically Structured Polystyrene-Based Surfaces Amplifying Fluorescence Signals: Cytocompatibility with Human Induced Pluripotent Stem Cell

An innovative multi-step phase separation process was used to prepare tissue culture for the polystyrene-based, hierarchically structured substrates, which mimicked in vivo microenvironment and architecture. Macro- (pore area from 3000 to 18,000 µm2; roughness (Ra) 7.2 ± 0.1 µm) and meso- (pore area from 50 to 300 µm2; Ra 1.1 ± 0.1 µm) structured substrates covered with micro-pores (area around 3 µm2) were prepared and characterised. Both types of substrate were suitable for human-induced pluripotent stem cell (hiPSC) cultivation and were found to be beneficial for the induction of cardiomyogenesis in hiPSC. This was confirmed both by the number of promoted proliferated cells and the expressions of specific markers (Nkx2.5, MYH6, MYL2, and MYL7). Moreover, the substrates amplified the fluorescence signal when Ca2+ flow was monitored. This property, together with cytocompatibility, make this material especially suitable for in vitro studies of cell/material interactions within tissue-mimicking environments.

Three-Dimensional Superhydrophobic Hollow Hemispherical MXene for Efficient Water-in-Oil Emulsions Separation

A superhydrophobic macroporous material composed of hollow hemispherical MXene (HSMX) was synthesized by the thermal annealing of MXene-wrapped cationic polystyrene spheres (CPS@MXene). Notably, the spherical MXene shells exhibited highly efficient catalysis of the carbonization of CPS into carbon nanoparticles. Their insertion into the interlayer of MXene increased the d-spacing and created hollow hemispheres. The as-prepared HSMX with nanoscale walls had a lower packing density than MXene, but higher porosity, total pore volume, and total pore area. Moreover, the stacking of hollow hemispheres promoted the formation of a highly undulating macroporous surface and significantly improved the surface roughness of the HSMX-based 3D membrane, resulting in superhydrophobicity with a water contact angle of 156.4° and a rolling angle of 6°. As a result, the membrane exhibited good separation efficiency and flux for emulsifier-stabilized water-in-paraffin liquid emulsions, which was dependent on its superhydrophobic performance and strong demulsification ability derived from the razor effect originating from the ultrathin walls of HSMX. This work provides a facile approach for the transformation of highly hydrophilic 2D MXene into superhydrophobic 3D HSMX, and opens a new pathway for the development of advanced MXene-based materials for environmental remediation applications.

EFFECT OF CO2-ADDED STEAM EXPLOSION ON OIL PALM EMPTY FRUIT BUNCH FOR BIOETHANOL PRODUCTION

This study aimed to investigate the effect of adding CO2 as an impregnation agent in steam explosion on oil palm empty fruit bunch (EFB) for bioethanol production. The influence of this treatment on the characteristics of EFB, enzymatic hydrolysis, and fermentation of EFB was evaluated in this investigation. CO2-added steam explosion was conducted varying the CO2 impregnation time (0, 30, 60 min). The results showed that the addition of CO2 in steam explosion increased the surface area, pore area, and pore volume of EFB. Furthermore, this treatment enabled obtaining yields of glucose and ethanol of 84.14% and 56.01%, respectively, for 60 min CO2 impregnation time. These results were higher than the glucose and ethanol yields of the sample treated by conventional steam explosion, which reached 58.12% and 41.37%, respectively. The findings illustrate the possibility of applying CO2-added steam explosion (CO2SE) for increasing the efficiency of biomass conversion.

Experimental Study on the Formation and Characteristics of Mud Filtration Cake in Large-Diameter Slurry Shield Tunneling

Multiple soil layers may be exposed simultaneously on the excavated surface of a large-diameter slurry shield. To study the formation and characteristics of mud filtration cake on the excavation surface during large-diameter slurry shield tunneling, penetration tests of mud slurries in different soils were carried out using a self-made device, and the microstructures of different mud filtration cakes were observed using scanning electron microscopy. The test results showed that there were three categories of filling forms for mud slurries permeating the soils: mud filtration cake, mud cake + permeation zone, and permeation zone; correspondingly, there were three types of filtration loss, which was mainly affected by the specific gravity of mud slurry. Finally, the porosity and the fractal dimension for the pore area of the mud filtration cake were calculated, and it is found that the fractal dimension of pore area is beneficial to classify the type of mud filtration cake.

Daily Fluctuation of Facial Pore Area, Roughness and Redness among Young Japanese Women; Beneficial Effects of Galactomyces Ferment Filtrate Containing Antioxidative Skin Care Formula

Young women often complain about the daily fluctuation of their facial skin conditions. However, no objective study has been carried out on such changes. This study is aimed at quantitatively elucidating daily skin fluctuation and evaluating the efficacy of cosmetic skin care treatment. We developed the first portable and self-guided facial skin imaging device (eMR Pro) to reproducibly capture facial images at home. Two 8 week clinical studies were then conducted to analyze daily skin fluctuation of facial pore areas, roughness and redness in young Japanese women (n = 47 in study 1 and n = 57 in study 2) by collecting facial images three times a day, during the morning after wake-up, during the morning after face wash, and during the evening after face wash. After a 4 week baseline measurement period (week -4 to week -1), all subjects applied Galactomyces ferment filtrate (GFF, Pitera®) skin care formula twice a day for 4 weeks (week 1 to week 4). These three skin conditions did exhibit different fluctuation patterns. The pore area and roughness showed the “morning after wake-up”-largest fluctuation pattern, whereas redness showed the “evening after face wash”-largest fluctuation pattern. GFF treatment significantly reduced the net values and delta fluctuation of pore area, roughness, and redness, which were consistently observed in two studies. In conclusion, the daily fluctuation of facial skin conditions is potentially a new target field for investigating healthy skin maintenance.

POROSITY AND PORE SIZE DISTRIBUTION OF RECENT AND ANCIENT BURIED PHOEBE ZHENNAN WOOD DETERMINED BY MERCURY INTRUSION POROSIMETRY

The porosity and pore size distribution of recent and ancient buried Phoebe zhennan are studied in this paper by means of mercury intrusion porosimetry. The results show that the micropore and mesopore diameters of recent and buried wood are mainly distributed in range of 40.3 nm and 183.1 nm respectively, while the macropore in 45276.6 nm and 3503.9 nm separately. For both samples, the pores with diameters below 349.9 nm account for about 60% of the total intrusion volume, and contribute more than 98% of the surface area. The cumulative pore area of recent wood is slightly greater and the pore diameter ranges from 50.3 nm to 349.9 nm. While the cumulative pore area of buried wood is significantly larger than and the pore diameter ranges until 50.3 nm. These results can provide information for further investigations on the sorption behaviour and the liquid permeability of ancient buried wood.

Mathematical Model for Effective Gas Diffusion Coefficient in Multi-scale Fractal Porous Media

Based on the capillary hypothesis and fractal theory, a mathematical model for calculating the effective gas diffusion coefficient in porous media is established. By using fractal geometry theory, pore area fractal dimension, tortuosity fractal dimension and pore connectivity are introduced to quantitatively characterize the real internal structure in the porous media. An effective gas diffusion coefficient model for the fractal porous media is derived, and the influence of multi-scale porous media microstructure parameters on the effective gas diffusion coefficient is discussed. The results show that effective gas diffusion coefficient approximates to linearly increase with the increase of porosity, the pore area fractal dimension and the effective gas diffusion coefficient is positive correlation, but the tortuosity fractal dimension is negatively related to it. In the case of different porosities, the gas effective diffusion coefficient varies with the change of the pore diameter ratio, the effective gas diffusion coefficient increases with the increase of pore connectivity.