Novel Chitosan-Silica Hybrid Hydrogels for Cell Encapsulation and Drug Delivery

Hydrogels constructed from naturally derived polymers provide an aqueous environment that encourages cell growth, however, mechanical properties are poor and degradation can be difficult to predict. Whilst, synthetic hydrogels exhibit some improved mechanical properties, these materials lack biochemical cues for cells growing and have limited biodegradation. To produce hydrogels that support 3D cell cultures to form tissue mimics, materials must exhibit appropriate biological and mechanical properties. In this study, novel organic-inorganic hybrid hydrogels based on chitosan and silica were prepared using the sol-gel technique. The chemical, physical and biological properties of the hydrogels were assessed. Statistical analysis was performed using One-Way ANOVAs and independent-sample t-tests. Fourier transform infrared spectroscopy showed characteristic absorption bands including amide II, Si-O and Si-O-Si confirming formation of hybrid networks. Oscillatory rheometry was used to characterise the sol to gel transition and viscoelastic behaviour of hydrogels. Furthermore, in vitro degradation revealed both chitosan and silica were released over 21 days. The hydrogels exhibited high loading efficiency as total protein loading was released in a week. There were significant differences between TC2G and C2G at all-time points (p < 0.05). The viability of osteoblasts seeded on, and encapsulated within, the hydrogels was >70% over 168 h culture and antimicrobial activity was demonstrated against Pseudomonas aeruginosa and Enterococcus faecalis. The hydrogels developed here offer alternatives for biopolymer hydrogels for biomedical use, including for application in drug/cell delivery and for bone tissue engineering.

Development of Fracturing Fluids Based on Acrylamide Copolymers and Study of Their Physical and Technological Properties Using the Oscillatory Rheometry Methods

This work studies the rheological properties of aqueous solutions of acrylamide copolymers. The prevailing role of elastic properties over viscous properties in predicting the proppant suspension capacity of the resulting fracturing fluid is shown. Furthermore, the potential of the use of oscillatory rheometry for studying fracturing fluid stability is demonstrated.

Characteristics of Reconstituted Collagen Fibers from Chicken Keel Cartilage Depends on Salt Type for Removal of Proteoglycans

The aim of the presented research was to obtain reconstituted atelocollagen fibers after extraction from poultry cartilage using the pepsin-acidic method in order to remove telopeptides from the tropocollagen. Firstly, we examined the extraction of collagen from the cartilage extracellular matrix (ECM) after proteoglycans (PG) had been removed by the action of salts, i.e., NaCl or chaotropic MgCl2. Additionally, the effects of the salt type used for PG and hyaluronic acid removal on the properties of self-assembled fibers in solutions at pH 7.4 and freeze-dried matrices were investigated. The basic features of the obtained fibers were characterized, including thermal properties using scanning calorimetry, rheological properties using dynamic oscillatory rheometry, and the structure by scanning electron microscopy. The fibers obtained after PG removal with both analyzed types of salts had similar thermal denaturation characteristics. However, the fibers after PG removal with NaCl, in contrast to those obtained after MgCl2 treatment, showed different rheological properties during gelatinization and smaller diameter size. Moreover, the degree of fibrillogenesis of collagens after NaCl treatment was complete compared to that with MgCl2, which was only partial (70%). The structures of fibers after lyophilization were fundamentally different. The matrices obtained after NaCl pretreatment form regular scaffolds in contrast to the thin, surface structures of the cartilage matrix after proteoglycans removal using MgCl2.

The Role of Residual Contaminants and Recycling Steps on Rheological Properties of Recycled Polypropylene

Recycling of polymers is one of the alternatives to reduce the impact of polymers presence on the environmental. However, the contaminants, defined as non-intentionally added substances, present in recycled material may migrate into food and also change its molecular structure. This work addresses the extractability/migration of contaminants from polypropylene (PP) samples into food simulants and the influence of these contaminants on the molecular structure of recycled PP. For this PP was contaminated with several substances to simulate a “worst-case” scenario and, then it was submitted to a recycling process. Extractability tests were performed by solid-phase microextraction and gas chromatography coupled to mass spectroscopy both to evaluate the presence of contaminants in the PP samples and their ability to migrate in food simulants. Additionally, molecular changes of the PP samples were evaluated by oscillatory rheometry. After washing and extrusion of the PP samples the extractability results showed considerable reductions of migrations in the food simulants and indicated, in some cases, compliance with regulations for using recycled polymer in contact with food. The residual contaminants were present in the polymer, the high temperatures and shear rates play an important role in molecular changes. Finally, the results highlight the importance of the use of rheological measurements to detect the influence of contaminants in recycled materials. Their presence result in material with different molar mass, that may be applied in different market applications.

Combined evaluation of oscillatory rheometry and isothermal calorimetry for the monitoring of hardening stage of Portland cement compositions blended with bauxite residue from Bayer process generated in different sites in Brazil

Bauxite residue (BR), a by-product of alumina and aluminum production, consists of high aluminum, silica, and iron content, and sodium from the bauxite ore digestion during the Bayer process. This waste is still being disposal into the lakes of mud, causing some environmental problems. So, the search for its application has gained interest. Studies reported in literature point out that one of the most promising applications is in association with Portland cement, which can also help to reduce the environmental impact caused by the CO2-emissions in its production. In this work, a combined evaluation of oscillatory rheometry and isothermal calorimetry was performed for the monitoring of the hardening stage of Portland cement (PC) compositions blended with BR generated in different sites in Brazil. The time-sweep test was applied to obtain the consistency gain of suspensions over-time, allowing us to understand the physical parameters of consolidation, while the changes in the hydration reaction showed considerable differences in the chemical contribution. As a conclusion, it was clear the impact of each BR, mainly due to the aspects related to soluble aluminates, silicates, and sodium, which in association with the soluble ions from PC, affected the chemical reaction and agglomeration/flocculation forces of particles.

Effect of Basalt Powder Surface Treatments on Mechanical and Processing Properties of Polylactide-Based Composites

Legislative restrictions and the needs of consumers have created a demand for sustainable materials. Polylactide (PLA) is a biodegradable polyester with advantageous mechanical properties, however, due to its low crystallization rate, it also has low thermomechanical stability. Its range of application temperatures can be widened using nucleating agents and fillers including basalt powder (BP), a waste product from the mining industry. This study analyzed the possibility of enhancing the properties of a PLA-BP composite by chemically treating the filler. Basalt powder was subjected to silanization with 3-aminopropyltriethoxysilane or γ-glycidoxypropyltrimethoxysilane and mixed with PLA at 5–20 wt%. The nucleating effect of a potassium salt of 3,5-bis(methoxycarbonyl) (LAK-301) in the silanized composite was also evaluated. The properties of the materials with silanized BP were compared with the unmodified basalt powder. The miscibility of the filler and the polymer was assessed by oscillatory rheometry. The structure of the composites was studied using scanning electron microscopy and their thermomechanical properties were analyzed using dynamic mechanical thermal analysis. Mechanical properties such as tensile strength, hardness and impact strength, and heat deflection temperature of the materials were also determined. It was concluded that BP-filled nucleated PLA composites presented satisfactory thermomechanical stability without silanization, but chemical treatment could improve the matrix–filler interactions.