Compositional Effects on Indentation Mechanical Properties of Chemically Strengthened TiO2-Doped Soda Lime Silicate Glasses

TiO2 is an important oxide for property modifications in the conventional soda lime silicate glass family. It offers interesting optical and mechanical properties, for instance, by substituting heavy metals such as lead in consumer glasses. The compositional effects on the hardness, reduced elastic modulus and crack resistance as determined by indentation of chemically strengthened (CS) TiO2-doped soda lime silicate glass was studied in the current paper. The CS, which was performed by a K+ for Na+ ion exchange in a molten KNO3 salt bath at 450 °C for 15 h, yielded significant changes in the indentation mechanical properties. The hardness of the glass samples increased, and this was notably dependent on the SiO2, CaO and TiO2 content. The reduced elastic modulus was less affected by the CS but showed decrease for most samples. The crack resistance, an important property in many applications where glasses are subjected to contact damage, showed very different behaviors among the series. Only one of the series did significantly improve the crack resistance where low CaO content, high TiO2 content, high molar volume and increased elastic deformation favored an increased crack resistance.

Scientific Analysis for Furnace Walls of the Joseon Dynasty Excavated in Southern Region of the Korean Peninsula

A study on the Joseon Dynasty’s furnace walls, excavated from south Korea, was conducted to identify the correlations and differences of the furnace walls found in Jeolla and Gyeongsang regions. Three ruins in the Jeolla region and two in the Gyeongsang region were selected for the analysis. The results showed a layer change depending on the degree of plasticity and difference in the number of layers and particle phase. Furthermore, although the temperature to be subjected to heat was divided into 1300°C and 1100°C, it was not a phenomenon that appeared according to the region. Additionally, analysis result of major components revealed that the TiO2 content of most samples does not exceed 1wt%, This means that the furnace did not smelt iron sand or smelted it into low-titanium sand. This study indicated a slight similarity between the furnace walls found in the two regions, and the correlation was determined based on the nature of the ruins, raw materials of the metals ores, and composition of the raw materials constituting the furnace walls.

Preparation and Characterisation of Polyurethane Acrylate-Based Titanium Dioxide Pigment for Blue Light-Curable Ink

Herein, a polyurethane acrylate-based TiO2 (PU-TiO2) was fabricated using a two-step method. First, a polyurethane prepolymer was prepared. Second, PU-TiO2 was prepared using amino-modified TiO2 (A-TiO2). The best synthesis process of the polyurethane prepolymer was when the reaction temperature was 80 °C, the reaction time was 3 h and the R-value of the polyurethane acrylate was 2. Next, the influence of the A-TiO2 content on the structure and performance of PU-TiO2 was examined. The analysis of the rheological properties of the PU-TiO2 ink indicated that its viscosity gradually increased as the A-TiO2 content increased. The tensile performance of film improved because of the presence of A-TiO2. The photo-polymerisation and photo-rheological performance indicated that the PU-TiO2 structure changed from a hyperbranched structure with TiO2 as the core to a segmented structure, as the A-TiO2 content was 3%.

Impact of TiO2 content on Titanium oxide supported chitosan photocatalytic system to treat organic dyes from wastewater

Titanium dioxide (TiO2) nanoparticles are used enormously for treating wastewater pollutants due to their unique optoelectronic and physiochemical properties. Though, wide bandgap, fast recombination of e- - h+ pair, and low adsorption toward organic pollutants limit their applications. However, immobilization of TiO2 on Chitosan (Cs) is believed to overcome these limitations. Cs with plenty of NH2 and OH groups in their structure are expected to enhance their adsorption and consequently photocatalytic performance. A series of TiO2/Cs photocatalysts have been prepared using a chemical co-precipitation method. Amount of TiO2 is varied from 0.25, 0.50, and 0.75 to 1.0 g. The photocatalysts are characterized by using FESEM-EDS, CHNS Elemental Analyser TGA, FTIR, and UV-Vis spectroscopy. These characterization results revealed the formation of a good interface between TiO2 and Cs matrix. Increasing TiO2 content significantly increased the thermal stability of the photocatalyst up to 600ᵒC. The photocatalytic activity of Cs/TiO2 is observed under UV light which is found to be more significant with 1:1(TiO2: Cs) composition for the degradation of methylene blue dye at 85 % and be maintained up to 4 numbers of cycles. This demonstrated open new insight into the application of Cs as a support materials and adsorption agent in TiO2 based photocatalyst system

Acidic and Electrosurface Properties of Binary TiO2–SiO2 Xerogels Using EPR of pH-Sensitive Nitroxides

The binary xerogels TiO2–SiO2 are widely used as catalysts and their carriers in organic synthesis. Characterization and adjustment of the electrostatic properties of the surface and the local acidity inside the pores, are necessary for the further development of TiO2–SiO2 xerogels applications. This research investigates acid–base equilibria in the pores, and the surface electrostatic potential (SEP) of binary TiO2–SiO2 xerogels, by the EPR of stable pH-sensitive nitroxide radicals. These radicals are small enough to penetrate directly into the pores, and to be adsorbed onto the surface of the material under study. This makes it possible to obtain valuable information on the acidic and electrosurface properties of the studied system. The highest negative surface electrical charge associated with surface electrical potential (SEP) was equal to –196 ± 6 mV. It was induced by the surface of the sample with a 7% TiO2 content. Тhe local acidity inside the pores of this sample was found to be higher, by approximately 1.49 pH units, as compared to that in the external bulk solution.

Effect of TiO2 on the Sintering Behavior of Low-Grade Vanadiferous Titanomagnetite Ore

Low-grade vanadiferous titanomagnetite ore (LVTM) is as an important mineral resource for sintering ore manufacturing. Furthermore, TiO2 has a significant effect on the sintering process of iron ore fines. The effects of TiO2 on the metallurgical properties, microstructure, and mineral composition of LVTM sinter were investigated by sintering pot tests, X-ray diffraction (XRD), scanning electron microscopy (SEM), and mineral phase microanalysis. The results were as follows: as the TiO2 content increased from 1.75% to 4.55%, the flame front speed and productivity decreased, while the reduction degradation index (RDI) and softening properties deteriorated. In addition, the tumbler index (TI) values reached a maximum at TiO2 = 1.75%. In addition, with increasing TiO2 content, an increase in the magnetite and perovskite phase, and a decrease in calcium ferrite and hematite were found with an increase in TiO2 content. Thus, the lower the TiO2 content, the better the quality of the sinter.

Tailoring the Optical Properties of Polymers Blend Nanocomposites

The presented work deals with the structural and optical properties of chemically synthesized TiO2 nanoparticles filled PC/PS blend nanocomposites. A series of PC/PS (100/0, 50/50, 0/100 wt%/wt %) -TiO2 (1, 2, 3 wt %) blend nanocomposites have been prepared by solution casting method. Prepared blend nanocomposites have been subjected to XRD, SEM and FTIR for structural analysis. Optical constants have been analyzed using UV-Vis spectroscopy. The XRD, SEM and FTIR spectrum confirms the formation of PC/PS-TiO2 blend nanocomposites. Results reveal the decrease in band gap and enhancement in optical constants like, extinction coefficient, refractive index and dielectric constants of blend nanocomposites with nanofiller TiO2 content.

The Influence of Titanium Dioxide on Silicate-Based Glasses: An Evaluation of the Mechanical and Radiation Shielding Properties

The mechanical and radiation shielding features were reported for a quaternary Na2O-CaO-SiO2-TiO2 glass system used in radiation protection. The fundamentals of the Makishima–Mazinize model were applied to evaluate the elastic moduli of the glass samples. The elastic moduli, dissociation energy, and packing density increased as TiO2 increased. The glasses’ dissociation energy increased from 62.82 to 65.33 kJ/cm3, while the packing factor slightly increased between 12.97 and 13.00 as the TiO2 content increased. The MCNP-5 code was used to evaluate the gamma-ray shielding properties. The best linear attenuation coefficient was achieved for glass samples with a TiO2 content of 9 mol%: the coefficient decreased from 5.20 to 0.14 cm−1 as the photon energy increased from 0.015 to 15 MeV.