Optimization of the drive mechanism with lead screw using Isight software

The ball screws are characterized with better positioning accuracy and higher efficiency and load ratings than the same size lead screw, but still cannot fully replace their functionality mostly due to the self-locking. Leads screws are recommended especially for such applications as grippers, lifters, presses and vertical positioning drives. By proper selection of the lead screw geometrical features and application of the modern materials, it is possible to obtain much more advantageous parameters of the drive system. In this paper, the methodology of optimization of the drive mechanism with lead screw using Isight software is presented. The performed sensitivity analysis allowed not only to find the influence of various constructional features such as: size of the thread, length of the screw and material properties, on the maximum load capacity of the drive mechanism and its inertia, but also determine its scale impact. The obtained results can improve the design process of lead screw mechanism.

DEVELOPMENT AND CHARACTERIZATION OF STITCH-BASED SENSORS

Strain sensing seams have been developed by integrating conductive sewing threads in different types of seam designs on a fabric typical for sports clothing using sewing technology. The aim was to obtain a simply integrated stitch-based sensor that can be applied on sports clothing to monitor the movements of the upper body parts of the user during exercising. Stitch types 304; 406; 602 and 605 were produced. The seams were made on a knitted fabric composed of 80% polyamide 6.6 and 20% elastane. The seams underwent stretch cycling for 10 cycles and up to 44 cycles following EN ISO 14704-1:2005 (modified), using an INSTRON tensile tester machine. The changes in the resistance of the seams with time were recorded simultaneously using Agilent meter U1273A. Sensing functionality among which is sensor gauge factor (GF), stability, drift, and reproducibility were evaluated on the promising sensor seams. The type of base fabric used, stitch type, stitch formation process (friction and dynamic forces during sewing), integrated EC thread length, and positioning of thread(s) in the fabric have a significant influence on the performance of the seams. Sensor seam 406-001comprising 2 EC yarns (Madeira HC12) and Sensor seam 304-010 comprising 1 EC yarn (Madeira HC40) turned out to be very promising and others shall be improved (sensor 602-006 with Madeira HC 40 and sensor 605-002 with a Muriel yarn).

In Silico Assessment of Safety and Efficacy of Screw Placement for Pediatric Image-Guided Otologic Surgery

Introduction: Current high-accuracy image-guided systems for otologic surgery use fiducial screws for patient-to-image registration. Thus far, these systems have only been used in adults, and the safety and efficacy of the fiducial screw placement has not yet been investigated in the pediatric population.Materials and Methods: In a retrospective study, CT image data of the temporal region from 11 subjects meeting inclusion criteria (8–48 months at the time of surgery) were selected, resulting in n = 20 sides. These datasets were investigated with respect to screw stability efficacy in terms of the cortical layer thickness, and safety in terms of the distance of potential fiducial screws to the dura mater or venous sinuses. All of these results are presented as distributions, thickness color maps, and with descriptive statistics. Seven regions within the temporal bone were analyzed individually. In addition, four fiducial screws per case with 4 mm thread-length were placed in an additively manufactured model according to the guidelines for robotic cochlear implantation surgery. For all these screws, the minimal distance to the dura mater or venous sinuses was measured, or if applicable how much they penetrated these structures.Results: The cortical layer has been found to be mostly between 0.7–3.3 mm thick (from the 5th to the 95th percentile), while even thinner areas exist. The distance from the surface of the temporal bone to the dura mater or the venous sinuses varied considerably between the subjects and ranged mostly from 1.1–9.3 mm (from the 5th to the 95th percentile). From all 80 placed fiducial screws of 4 mm thread length in the pediatric subject younger than two years old, 22 touched or penetrated either the dura or the sigmoid sinus. The best regions for fiducial placement would be the mastoid area and along the petrous pyramid in terms of safety. In terms of efficacy, the parietal followed by the petrous pyramid, and retrosigmoid regions are most suited.Conclusion: The current fiducial screws and the screw placement guidelines for adults are insufficiently safe or effective for pediatric patients.

Salvaging Pull-Out Strength in a Previously Stripped Screw Site: A Comparison of Three Rescue Techniques

Screw stripping during bone fixation is a common occurrence during operations that results in decreased holding capacity and bone healing. We aimed to evaluate the rescue of the stripped screw site using screws of different dimensions. Five screw configurations were tested on cadaveric specimens for pull-out strength (POS). The configurations included a control screw tightened without stripping, a configuration voluntarily stripped and left in place, and three more configurations in which the stripped screws were replaced by a different screw with either increased overall length, diameter, or thread length. Each configuration was tested five times, with each screw tested once. The POS of the control screw, measured to be 153.6 ± 27 N, was higher than the POS measured after stripping and leaving the screw in place (57.1 ± 18 N, p = 0.001). The replacement of the stripped screw resulted in a POS of 158.4 ± 64 N for the screw of larger diameter, while the screws of the same diameter but increased length or those with extended thread length yielded POS values of 138.4 ± 42 and 185.7 ± 48 N, respectively. Screw stripping is a frequent intraoperative complication that, according to our findings, cannot be addressed by leaving the screw in place. The holding capacity of a stripped screw implanted in cancellous bone can successfully be restored with a different screw of either larger diameter, longer length, or extended thread length.

Timber screw connection: Study of the strain along the interface using optical measurement techniques and simulations

In various engineering applications, self-tapping screws are used to connect timber members. To describe their load-deformation relationship, a better understanding of the strain along the mechanical interface (i.e., timber-screw interface) is required. With a focus on the axial loading of self-tapping screws, only a few studies have dealt with the determination of the strain based on optical measurement techniques. Therefore, in the present study, the strain distribution at the timber-screw interface was monitored during pull-out tests using an optical measurement technique, called electronic speckle pattern interferometry (ESPI). Strains obtained from the ESPI measurements were compared with the results obtained from structural simulations conducted with finite element modelling (FEM). Three different types of solid spruce wood (Picea abies (L.) Karst.) specimens with different grain orientations connected with self-tapping screws (thread length lg = 130 mm, outer thread diameter d = 12 mm) were tested in withdrawal. There was a good agreement between the ESPI and FEM results, confirming that ESPI was a suitable measurement technique. The study also provided insights and results regarding the region of strain concentrations across the length of self-tapping screws.

Clustering of Streptococcus thermophilus Strains to Establish a Relation between Exopolysaccharide Characteristics and Gel Properties of Acidified Milk

In situ produced extracellular polysaccharides (EPS) from lactic acid bacteria are generally known to affect the texture of fermented dairy products; however, the interplay between EPS and product properties is still poorly understood. The aim of this study was to establish a relationship between concentration and properties of EPS, and gel formation of milk analysed by noninvasive Multispeckle Diffusing Wave Spectroscopy. Twenty Streptococcus thermophilus strains were classified with respect to EPS concentration (8–126 mg GE/kg) and ropiness (thread length: 15–80 mm). Five groups identified by cluster analysis demonstrate the high strain-to-strain variability even within one species of lactic acid bacteria. Results from acidification and gelation experiments averaged per cluster indicate that fermentation time and gel stiffness is higher for strains that produce ropy EPS. A further increase in gel stiffness was detected for strains that also produced cell-bound EPS, which underlines the importance of both ropy and cell-bound EPS for improving acid gel properties. The results may be helpful for a proper selection of EPS-producing starter cultures.

Corticopuncture Facilitated Microimplant-Assisted Rapid Palatal Expansion

Introduction. Microimplant-assisted rapid palatal expansion (MARPE) has been considered an alternative to avoid extensive surgical procedures. In order to obtain skeletal results of MARPE, force should be enough to overcome areas of resistance and the first one that is required to be disrupted is the midpalatal suture, which becomes increasingly interdigitated after adolescence. Objective. The present study aimed at providing a novel approach using a minimally invasive method called corticopuncture (CP) in association with MARPE illustrated by a case report of a 35-year-old Brazilian female Caucasian patient presenting maxillary transverse deficiency. Method. Treatment plan started with an orthopedic correction of the transverse problem using a MARPE device. After many unsuccessful attempts to activate MARPE, corticopunctures were performed along the midpalatal suture. CP procedure at the midpalatal suture included 8 perforations (2 mm apart), performed after previous predrilling followed by miniscrew insertion (5 mm thread length and 1.8 mm diameter). Results. After CP and new activation protocol, the opening of the midpalatal suture was observed by CBCT images, showing skeletal results, suture split of 3.14 mm (premolar area) and 2.06 (molar area), an increase of 4.3 mm (premolar) and 3.03 mm (molar) in basal bone width, 4.43 mm (premolar) and 3.1 mm (molar) in cortical bone width, and minimal dental effects (mean of 1.2° of tooth tipping). Conclusion. The combination of MARPE and corticopuncture method was proved to be a nonsurgical treatment option to correct maxillary transverse deficiency in an adult patient. CP was able to weaken suture interdigitation thus facilitating the split.

CHARACTERIZATION OF NEW GEORGIAN MULBERRY SILKWORM BREEDS RELATIVELY RESISTANT TO THE DISEASE «NUCLEAR POLYHEDROSIS»

The paper considers biotechnological characteristics of new breeds of mulberry silkworm „V-1“ and „V-2“, which are relatively resistant to the worm disease „nuclear polyhedrosis“. The hybreeds were obtained from mulberry silkworm breeds „Dighmuri“ and „Iveria“. Breed “Iveria” is characterized by short period of feeding; it was created for the west Georgia zone, while the cocoon thread length of the breed “Dighmuri” is 1800-2000 meter, silk capacity of live cocoon is 25-26%, but these breeds are characterized by relatively low viability [1,2,3]. Our research aimed to improve namely this flaw. As a result of complex selection works carried out for the improvement of the above stated viability and other major indices we received new highly productive breeds, which by their indices equal or exceed initial breeds.