dangerous goods
Recently Published Documents


TOTAL DOCUMENTS

952
(FIVE YEARS 261)

H-INDEX

18
(FIVE YEARS 3)

2022 ◽  
Vol 14 (2) ◽  
pp. 930
Author(s):  
Andy Oakey ◽  
Matt Grote ◽  
Paul G. Royall ◽  
Tom Cherrett

Health service providers in developed nations are responsible for 5% of their national carbon emissions, much of which originate from transport and supply chains. Connected autonomous freight vehicles (CAV-Fs) offer the potential to reduce this impact and enable lower cost operations, with trials being explored across the world. Transportation and carriage regulations, particularly in relation to the movement of dangerous goods (DG) such as medicines and diagnostic specimens, have not been developed for and applied to this new transport mode, particularly where loads are unaccompanied. Through an audit of current legislation and practice, this paper evaluates current DGs regulations applied to the transportation of medical products and medicines by autonomous road vehicles. Where existing regulations are not appropriate for CAV-Fs, recommendations and adaptations have been proposed to support safe and practical application. Remote monitoring and tracking of vehicles are critical for ensuring load security, quick and effective incident response, and management of documents and communications between parties. Loading/unloading procedures are significantly more important than in crewed vehicles, with load segregation and recording of all activity being of key importance. Other recommendations relate to training provision, vehicle specifications, and product health monitoring.


2022 ◽  
Vol 6 (1) ◽  
pp. 35-40
Author(s):  
Yan Lu

The pollution problem arising from the flushing of initial rainwater and wastewater from accidents while transporting dangerous goods to source water protection areas needs to be solved as soon as possible. Therefore, the design of corresponding environmental protection measures should be considered in the engineering design stage. It is necessary to analyze the specific work in combination with engineering examples. Under this background, this paper first briefly expounds the precautions in accident risk analysis and the design of tank capacity and tank body. Finally, by analyzing actual cases, this paper systematically studies the design strategy of emergency pool in source water protection area, hoping to provide new development ideas for the upgrading of relevant work.


Author(s):  
Nafiseh Esmaeeli ◽  
Fereshteh Sattari ◽  
Lianne Lefsrud ◽  
Renato Macciotta

Canada’s rail transportation network is a critical part of Canada’s integrated supply chain which connects industries, consumers, and resource sectors to ports on the Atlantic and Pacific coasts. One transportation activity that is essential to most industries, especially oil and manufacturing, is the rail transport of dangerous goods (DG). Although rail transportation of DG is beneficial to Canada’s economy, not paying attention to the safe transportation of these types of goods can have irreparable effects on the economy, human lives, and the environment. Recent rail accidents, such as Lake Wabamun in 2005 and Lac-Mégantic in 2013, have shown that there is still room to increase the safety of transportation of DG by rail through improving railways’ safety management systems (SMS). As a result, investigations to increase the safety of rail transportation of DG have been started. This work is part of these initiatives focusing on enhancing railways’ SMS, particularly DG main-track train derailments. The current study applied detailed root cause analysis (RCA), the bow tie analysis (BTA), and incident databases to identify the main causes and consequences of these types of accidents (2007–2017). Then, the relationship between these factors and gaps in SMS elements were identified and the frequency of each factor was investigated. The results showed that the main gaps are related to process and equipment integrity, incident investigation, and company standards, codes, and regulations. Furthermore, some useful recommendations are presented to improve the management of each SMS element and reduce these gaps.


2022 ◽  
pp. 164-184
Author(s):  
Çağlar Karamaşa ◽  
Selçuk Korucuk ◽  
Ezgi Demir

Considering the environment and human life, the importance of dangerous goods transportation should be carefully considered. Preventing damages during this transportation, anticipating the dangers, and minimizing the risks are vital components for businesses, human life, and the environment. Therefore, reducing/minimizing risks in dangerous goods transportation is a critical element of vital importance. This chapter is aimed to rate the risk factors related to dangerous goods transportation and select the most ideal warehouse locations due to the their importance for human and environmental health. There are a number of factors for that purpose. There are six provinces in the Eastern Black Sea region having the strategic function and structure. According to the decision makers' views and judgments, three provinces are determined in terms of dangerous goods transportation. Picture fuzzy sets-based AHP-TOPSIS methodology was used to analyze the problem of dangerous goods transportation and the most ideal warehouse location selection.


Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Nikolina Vojinović ◽  
Siniša Sremac ◽  
Dragan Zlatanović

The organization and execution of the transport of dangerous goods is conditioned by a series of legal, technical, technological, safety, and engineering requirements, which must be met. In this way, a complex system is created which has a large number of participants and in which optimization should be performed at each stage from all the above aspects. The main goal of this paper is to create a novel Fuzzy-Rough MCDM (Multiple-Criteria Decision-Making) for the evaluation of companies engaged in the transport of dangerous goods. A group decision-making model was created to evaluate 11 transport companies based on nine legal, technical, technological criteria. The improved fuzzy stepwise weight assessment ratio analysis (IMF SWARA) method was used to calculate the criterion weights, while transport companies were ranked based on Rough Measurement Alternatives and Ranking according to the COmpromise Solution (R-MARCOS). The integration of these methods into a single model that combines two theories of uncertainty, fuzzy and rough, was performed for the first time in this study, which represents a significant contribution. The results show that the most significant criteria are as follows: dangerous goods are classified and permitted under ADR (Agreement Concerning the International Carriage of Dangerous Goods by Road), the prescribed documents are in the transport unit, and the equipment is in the transport unit. When it comes to the evaluation results of companies, it can be noticed that A1 and A4 show the best performance, while A8 and A9 are in the last position. In order to test the stability of the model developed, sensitivity analysis, comparative analysis, and the influence of the dynamic formation of the initial matrix were created.


Author(s):  
J. Zelenko ◽  
M. Kalimbet

The article raises the issues of rail transport in many countries, including the European Union and Ukraine, transportation of various classes of dangerous goods, ensuring safety during their transportation, strengthening technical standards and environmental requirements for safety of dangerous goods transportation by all modes of transport and the problem of localization and liquidation of accidents during transportation of various classes of dangerous goods by rail is raised. Methods and methods of localization and elimination of spills of dangerous goods are discussed, the sorption method is described as the chosen method to solve the problem, a brief description of sorbents is given, various variants and modifications of materials for carbon sorbents are presented, materials will be used for universal sorption web, method of obtaining a universal sorption web, demonstrated a special installation for carbonization (Carbonizer), which was slightly modernized and made by the authors according to the design of the Engels University. The method of conducting experiments is described. The characteristics of the universal sorption web, its sorption properties are given, and also the technique of using the universal sorption web as a means for localization and / or liquidation of liquid hazardous substances of 3, 5, 8 hazard classes is proposed.


Pomorstvo ◽  
2021 ◽  
Vol 35 (2) ◽  
pp. 231-240
Author(s):  
Özge Eski ◽  
Leyla Tavacioglu

The International Maritime Dangerous Goods (IMDG) Code training is mandatory for all shore-side personnel involved in the handling and transport of dangerous cargoes by sea. This study aims to measure and evaluate the port workers’ dangerous cargo transport general awareness level. For this purpose, the “Dangerous Cargo Transport General Awareness Questionnaire” was developed and applied to trained 100 port workers face-to-face. The questionnaire was proven to be valid and reliable by content validity, construct validity, internal consistency reliability, and test-retest reliability analyses. Four factors were determined as a result of Explanatory Factor Analysis. Discriminant analyses were performed using the Student’s t-test and One Way ANOVA test. Pearson correlation analysis was carried out to determine the relationship between factors. Simple linear regression analysis was used for modeling the relationship between factors. SPSS 24.0 was utilized to conduct the analyses. According to analysis results, port workers’ dangerous cargo transport general awareness does not differ depending on age, position, and education. There is a weak positive or a moderate positive correlation between factors. Port workers have an average and above-average level of general awareness. It is highlighted that increasing this level is possible by increasing the frequency of dangerous cargo transport training. Suggestions are offered for more effective training.


Sign in / Sign up

Export Citation Format

Share Document