scholarly journals Influence of Alkyl Chains of Modified Polysuccinimide‐Based Polycationic Polymers on Polyplex Formation and Transfection

2019 ◽  
Vol 19 (10) ◽  
pp. 1900117 ◽  
Author(s):  
Marcelo H. Kravicz ◽  
Debora T. Balogh ◽  
Mrityunjoy Kar ◽  
Stefanie Wedepohl ◽  
Maria Vitoria L. B. Bentley ◽  
...  
1983 ◽  
Vol 44 (4) ◽  
pp. 497-503 ◽  
Author(s):  
J.P. Beaufils ◽  
M. C. Hennion ◽  
R. Rosset

2012 ◽  
Vol 68 (4) ◽  
pp. o152-o155 ◽  
Author(s):  
Malcolm A. Kelland ◽  
Amber L. Thompson

Tetraisohexylammonium bromide [systematic name: tetrakis(4-methylpentyl)azanium bromide], C24H52N+·Br−, is a powerful structure II clathrate hydrate crystal-growth inhibitor. The crystal structure, in the space groupP3221, contains one ammonium cation and one bromide anion in the asymmetric unit, both on general positions. At 100 K, the ammonium cation exhibits one ordered isohexyl chain and three disordered isohexyl chains. At 250 K, all four isohexyl chains are disordered. In an effort to reduce the disorder in the alkyl chains, the crystal was thermally cycled, but the disorder remained, indicating that it is dynamic in nature.


Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3946
Author(s):  
Rui A. Gonçalves ◽  
Yeng-Ming Lam ◽  
Björn Lindman

Double-chain amphiphilic compounds, including surfactants and lipids, have broad significance in applications like personal care and biology. A study on the phase structures and their transitions focusing on dioctadecyldimethylammonium chloride (DODAC), used inter alia in hair conditioners, is presented. The phase behaviour is dominated by two bilayer lamellar phases, Lβ and Lα, with “solid” and “melted” alkyl chains, respectively. In particular, the study is focused on the effect of additives of different polarity on the phase transitions and structures. The main techniques used for investigation were differential scanning calorimetry (DSC) and small- and wide-angle X-ray scattering (SAXS and WAXS). From the WAXS reflections, the distance between the alkyl chains in the bilayers was obtained, and from SAXS, the thicknesses of the surfactant and water layers. The Lα phase was found to have a bilayer structure, generally found for most surfactants; a Lβ phase made up of bilayers with considerable chain tilting and interdigitation was also identified. Depending mainly on the polarity of the additives, their effects on the phase stabilities and structure vary. Compounds like urea have no significant effect, while fatty acids and fatty alcohols have significant effects, but which are quite different depending on the nonpolar part. In most cases, Lβ and Lα phases exist over wide composition ranges; certain additives induce transitions to other phases, which include cubic, reversed hexagonal liquid crystals and bicontinuous liquid phases. For a system containing additives, which induce a significant lowering of the Lβ–Lα transition, we identified the possibility of a triggered phase transition via dilution with water.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Shihong Liu ◽  
Michael Gonzalez ◽  
Celine Kong ◽  
Scott Weir ◽  
Aaron M. Socha

Abstract Background Ionic liquids (ILs) are promising pretreatment solvents for lignocellulosic biomass, but are largely prepared from petroleum precursors. Benzaldehydes from depolymerized lignin, such as vanillin, syringaldehyde, and 4-methoxy benzaldehyde, represent renewable feedstocks for the synthesis of ionic liquids. We herein report syntheses of novel lignin-derived ionic liquids, with extended N-alkyl chains, and examine their melting points, cellulose dissolution capacities, and toxicity profiles against Daphnia magna and E. coli strain 1A1. The latter organism has been engineered to produce isoprenol, a drop-in biofuel and precursor for commodity chemicals. Results The new N,N-diethyl and N,N-dipropyl methyl benzylammonium ILs were liquids at room temperature, showing 75–100 °C decreased melting points as compared to their N,N,N-trimethyl benzylammonium analog. Extension of N-alkyl chains also increased antibacterial activity threefold, while ionic liquids prepared from vanillin showed 2- to 4-fold lower toxicity as compared to those prepared from syringaldehyde and 4-methoxybenzaldehyde. The trend of antibacterial activity for anions of lignin-derived ILs was found to be methanesulfonate < acetate < hydroxide. Microcrystalline cellulose dissolution, from 2 to 4 wt% after 20 min at 100 °C, was observed in all new ILs using light microscopy and IR spectroscopy. Conclusions Ionic liquids prepared from H-, S- and G-lignin oxidation products provided differential cytotoxic activity against E. coli and D. magna, suggesting these compounds could be tailored for application specificity within a biorefinery.


2021 ◽  
Author(s):  
Qi Zhao ◽  
Jin-Peng Xue ◽  
Zhi-Kun Liu ◽  
Zi-Shuo Yao ◽  
Jun Tao

A mononuclear complex with long alkyl chains, [FeII(H2Bpz2)2(C9bpy)] (1; H2Bpz2 = dihydrobis(1-pyrazolyl)borate, C9bpy = 4,4'-dinonyl-2,2'-bipyridine), was synthesized. Single-crystal X-ray crystallographic studies revealed that - and - forms of the complex...


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Tae Hyeong Kim ◽  
Hyeji Kim ◽  
Hyo Jun Jang ◽  
Nara Lee ◽  
Kwang Hyun Nam ◽  
...  

AbstractIn the study reported herein, silver-coated copper (Ag/Cu) powder was modified with alkanethiols featuring alkyl chains of different lengths, namely butyl, octyl, and dodecyl, to improve its thermal stability. The modification of the Ag/Cu powders with adsorbed alkanethiols was confirmed by scanning electron microscopy with energy dispersive spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Each powder was combined with an epoxy resin to prepare an electrically conductive film. The results confirmed that the thermal stability of the films containing alkanethiol-modified Ag/Cu powders is superior to that of the film containing untreated Ag/Cu powder. The longer the alkyl group in the alkanethiol-modified Ag/Cu powder, the higher the initial resistance of the corresponding electrically conductive film and the lower the increase in resistance induced by heat treatment.


ChemPlusChem ◽  
2021 ◽  
Vol 86 (2) ◽  
pp. 340-346
Author(s):  
Lu Zheng ◽  
Shengzhu Guo ◽  
Chu Wang ◽  
Yanru Wang ◽  
Yanqing Fan ◽  
...  
Keyword(s):  

2021 ◽  
Vol 22 (5) ◽  
pp. 2571
Author(s):  
Anita Romanowska ◽  
Katarzyna Węgrzyn ◽  
Katarzyna Bury ◽  
Emilia Sikorska ◽  
Aleksandra Gnatek ◽  
...  

The present study aimed to synthesize novel polycationic polymers composed of N-substituted L-2,3-diaminopropionic acid residues (DAPEGs) and investigate their cell permeability, cytotoxicity, and DNA-binding ability. The most efficient cell membrane-penetrating compounds (O2Oc-Dap(GO2)n-O2Oc-NH2, where n = 4, 6, and 8) showed dsDNA binding with a binding constant in the micromolar range (0.3, 3.4, and 0.19 µM, respectively) and were not cytotoxic to HB2 and MDA-MB-231 cells. Selected compounds used in the transfection of a GFP plasmid showed high transfection efficacy and minimal cytotoxicity. Their interaction with plasmid DNA and the increasing length of the main chain of tested compounds strongly influenced the organization and shape of the flower-like nanostructures formed, which were unique for 5/6-FAM-O2Oc-[Dap(GO2)]8-O2Oc-NH2 and typical for large proteins.


2021 ◽  
Vol 188 (2) ◽  
Author(s):  
Tomasz Rębiś ◽  
Michał Niemczak ◽  
Patrycja Płócienniczak ◽  
Juliusz Pernak ◽  
Grzegorz Milczarek

AbstractAn electrochemical sensor was fabricated utilizing ionic liquids possessing cations with long alkyl chains such as trimethyl octadecylammonium and behenyl trimethylammonium and ascorbate anion. The ionic liquids were drop-coated onto the electrode. Thin modifying layers were prepared. Cyclic voltammetric investigations revealed electrostatic interactions between the electrochemical probes and the modified surface, proving that a positive charge was established at the film surface. Hence, negatively charged species such as nitrite can be pre-concentrated on the surface of presented modified electrodes. The fabricated electrodes have been used as a voltammetric sensor for nitrite. Due to the electrostatic accumulation properties of long alkyl cation, the assay exhibits a remarkable improvement in the voltammetric response toward nitrite oxidation. The influence of pH on the electrode response was thoroughly investigated, and the mechanism of the electrode was established. The developed sensor showed a linear electrochemical response in the range 1.0–50 μM with a detection limit of 0.1 μM. The electrode revealed good storage stability, reproducibility, and anti-interference ability. The determination of nitrite performed in curing salts brought satisfactory results. Graphical abstract


1997 ◽  
Vol 234-236 ◽  
pp. 109-111 ◽  
Author(s):  
M. Bée ◽  
J. Combet ◽  
N-D. Morelon ◽  
M. Ferrand ◽  
D. Djurado ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document