Materials Used for Vascular Embolization

2016 ◽  
pp. 7-19
Author(s):  
Kiron Varghese ◽  
Srilakshmi Adhyapak
Keyword(s):  
Materials Used

Deformation Replication

1970 ◽  
Vol 28 ◽  
pp. 280-281
Author(s):  
J. Temple Black
Keyword(s):  
Cutting Speed ◽  
Machining Process ◽  
Depth Of Cut ◽  
Rake Face ◽  
Orthogonal Machining ◽  
Aluminum Chips ◽  
Before And After ◽  
Materials Used ◽  
Glass Knife ◽  
Very High

Tool materials used in ultramicrotomy are glass, developed by Latta and Hartmann (1) and diamond, introduced by Fernandez-Moran (2). While diamonds produce more good sections per knife edge than glass, they are expensive; require careful mounting and handling; and are time consuming to clean before and after usage, purchase from vendors (3-6 months waiting time), and regrind. Glass offers an easily accessible, inexpensive material ($0.04 per knife) with very high compressive strength (3) that can be employed in microtomy of metals (4) as well as biological materials. When the orthogonal machining process is being studied, glass offers additional advantages. Sections of metal or plastic can be dried down on the rake face, coated with Au-Pd, and examined directly in the SEM with no additional handling (5). Figure 1 shows aluminum chips microtomed with a 75° glass knife at a cutting speed of 1 mm/sec with a depth of cut of 1000 Å lying on the rake face of the knife.

High Voltage Transmission Microscopy of Surveyor III Camera Shrouds

1971 ◽  
Vol 29 ◽  
pp. 138-139
Author(s):  
W. R. Duff ◽  
L. E. Thomas ◽  
R. M. Fisher ◽  
S. V. Radcliffe
Keyword(s):  
Alloy Sheet ◽  
Transmission Microscopy ◽  
Television Camera ◽  
Window Method ◽  
Transmission Electron ◽  
Microstructural Effects ◽  
Lunar Environment ◽  
Successful Retrieval ◽  
Materials Used ◽  
Abrasive Paper

Successful retrieval of the television camera and other components from the Surveyor III spacecraft by the Apollo 12 astronauts has provided a unique opportunity to study the effects of a known and relatively extensive exposure to the lunar environment. Microstructural effects including those produced by micro-meteorite impact, radiation damage (by both the solar wind and cosmic rays) and solar heating might be expected in the materials used to fabricate the spacecraft. Samples received were in the form of 1 cm2 of painted unpainted aluminum alloy sheet from the top of the camera visor (JPL Code 933) and the sides (935,936) and bottom (934) of the lower camera shroud. They were prepared for transmission electron microscopy by first hand-grinding with abrasive paper to a thickness of 0.006". The edges were lacquered and the sample electropolished in 10% perchloric methanol using the “window” method, to a thickness of ~0.001". Final thinning was accomplished by polishing 3 mm punched disks in an acetic-phosphoric-nitric acid solution.

Structure-property relationships of PE/PP sandwiched films

1987 ◽  
Vol 45 ◽  
pp. 454-455
Author(s):  
J. Petermann ◽  
G. Broza ◽  
U. Rieck ◽  
A. Jaballah ◽  
A. Kawaguchi
Keyword(s):  
Mechanical Tests ◽  
Polymer Materials ◽  
Ionic Crystals ◽  
Structure Property ◽  
Polymer Systems ◽  
Structure Property Relationships ◽  
Oriented Films ◽  
Materials Used ◽  
Polymer Laminates ◽  
Heated Glass

Oriented overgrowth of polymer materials onto ionic crystals is well known and recently it was demonstrated that this epitaxial crystallisation can also occur in polymer/polymer systems, under certain conditions. The morphologies and the resulting physical properties of such systems will be presented, especially the influence of epitaxial interfaces on the adhesion of polymer laminates and the mechanical properties of epitaxially crystallized sandwiched layers.Materials used were polyethylene, PE, Lupolen 6021 DX (HDPE) and 1810 D (LDPE) from BASF AG; polypropylene, PP, (PPN) provided by Höchst AG and polybutene-1, PB-1, Vestolen BT from Chemische Werke Hüls. Thin oriented films were prepared according to the method of Petermann and Gohil, by winding up two different polymer films from two separately heated glass-plates simultaneously with the help of a motor driven cylinder. One double layer was used for TEM investigations, while about 1000 sandwiched layers were taken for mechanical tests.

Notes on Heat Insulation, Particularly with regard to Materials used in Furnace Construction

1906 ◽  
Vol 61 (1583supp) ◽  
pp. 25360-25361
Author(s):  
R. S. Hutton ◽  
J. R. Beard
Keyword(s):  
Heat Insulation ◽  
Materials Used

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

Brownstock washing: A review of the literature

TAPPI Journal ◽  
2014 ◽  
Vol 13 (1) ◽  
pp. 9-19 ◽  
Author(s):  
RICARDO B. SANTOS ◽  
PETER W. HART
Keyword(s):  
High Efficiency ◽  
Black Liquor ◽  
Material Balance ◽  
Kraft Pulping ◽  
Wash Water ◽  
Pulp Fibers ◽  
Kraft Process ◽  
Cooking Process ◽  
Materials Used ◽  
Entrapped Air

Brownstock washing is a complex, dynamic process in which dirty wash water or weak black liquor (dissolved organic and inorganic material obtained from the pulp cooking process) is separated from pulp fibers. The use of material balance techniques is of great importance to identify potential problems and determine how well the system is operating. The kraft pulping industry was the first known to combine pulp washing with the recovery of materials used and produced in the wood cooking process. The motivation behind materials recovery is economic, and more recently, environmentally driven. The chemicals used in the kraft process are expensive as compared to those used in the sulfite process. For the kraft process to be economically viable, it is imperative that a very high percentage of the cooking chemicals be recovered. To reach such high efficiency, a variety of washing systems and monitoring parameters have been developed. Antifoam additives and processing aids have also played an important role in increasing washing effectiveness. Antifoam materials help attain washing effectiveness by preventing entrapped air from forming in the system, which allows for an easier, unimpeded flow of filtrate through the screens and washers.

Growth and yield of okra (Abelmoschus esculentus (L.) Moench) grown in the marginal upland area of Sta. Rita, Samar as influenced by different planting densities and mulching materials

2017 ◽  
pp. 44-54
Author(s):  
Zenaida Gonzaga ◽  
Warren Obeda ◽  
Ana Linda Gorme ◽  
Jessie Rom ◽  
Oscar Abrantes ◽  
...  
Keyword(s):  
Bare Soil ◽  
Abelmoschus Esculentus ◽  
Growth And Yield ◽  
Planting Density ◽  
Rice Hull ◽  
Plastic Mulch ◽  
Lady’S Finger ◽  
Materials Used ◽  
Set Up ◽  
A Minor

Okra or Lady’s finger, botanically known as Abelmoschus esculentus (L.) Moench, is a tropical and sub-tropical indigenous vegetable crop commonly grown for its fibrous, slimy, and nutritious fruits and consumed by all classes of population. It has also several medicinal and economic values. Despite its many uses and potential value, its importance is under estimated, under-utilized, and considered a minor crop and little attention was paid to its improvement. The study was conducted to evaluate the effects of different planting densities and mulching materials on the growth and yield of okra grown in slightly sloping area in the marginal uplands in Sta. Rita, Samar, Philippines. A split-plot experiment was set up with planting density as main plot and the different mulching materials as the sub-plot which were: unmulched or bare soil, rice straw, rice hull, hagonoy and plastic mulch. Planting density did not significantly affect the growth and yield of okra. Regardless ofthe mulching materials used, mulched plants were taller and yielded higher compared to unmulched plants. Moreover, the use of plastic mulch resulted to the highest total fruit yield. The results indicate the potential of mulching in increasing yield and thus profitability of okra production under marginal upland conditions.

PENGEMBANGAN BAHAN AJAR TEKS DRAMA BERDASARKAN PENGALAMAN PENGARANG

2019 ◽  
Vol 8 (2) ◽  
Author(s):  
Didin Khaerudin ◽  
Suherli Kusmana ◽  
Iyay Robia Khaerudin
Keyword(s):  
Personal Experience ◽  
Teaching Materials ◽  
Learning Skills ◽  
Student Activities ◽  
Development Method ◽  
Average Value ◽  
Surrounding Environment ◽  
Basic Competencies ◽  
Materials Used ◽  
Minimum Criteria

Research conducted to develop drama text teaching materials based on the experience of the author of the drama script aims to make it easier for students to understand drama text material. In addition, based on the author's experience students are expected to emulate the author's creative process in writing a paper. The research method used in this research is the research and development method. Based on the results of the interview it can be concluded that the ability to write drama is determined based on mastery of the elements of drama and the ability to develop stories based on the author's experience. The process of writing drama is done in several steps: (1) searching for ideas based on personal experience, other people, or the surrounding environment; (2) processing ideas to find plots (characters), characters or characters that vary with their inner conflicts, settings and dialogues, interesting conflicts, and messages to be conveyed; (3) starts the process of writing drama with stages and elements of drama; (4) revision of drama products. Teaching material developed is presented from basic competencies of knowledge and basic competencies of learning skills. Based on experiments on developed teaching materials it is known that the average value of the ability to write plays gets a score exceeding the minimum criteria, so that the teaching materials used are effective. Based on observations it is known that teaching materials can help students in learning and student activities become more independent, and active.

Parameters Of Technological Processes Reengineering

2020 ◽  
pp. 28-33
Keyword(s):  
Spatial Organization ◽  
Parametric Model ◽  
Practical Significance ◽  
Machine Time ◽  
Time Machine ◽  
Technological Processes ◽  
Technical Capability ◽  
Materials Used ◽  
The Cost ◽  
Qualitative Characteristics

The article is devoted to reengineering of technological processes - a method of their qualitative transformation on an innovative basis, which in turn assumes the availability of tools that make it possible to establish the economic efficiency and technical capability of such transformations of construction production, to identify the effect of their implementation. In this regard, the problem of forming a parametric model of reengineering of construction technological processes, which involves four enlarged groups of indicators that reflect the quantitative and qualitative characteristics of the processes: materials used, working time, machine time, spatial organization, is considered. It is established that parameters can have either an absolute (physical, cost) or relative (point, percentage) expression and also make their own decomposition. The practical significance of the provisions given in the article is determined by the development of methods of technical rationing, which leads to a reduction in the cost and duration of construction.

Sign in / Sign up

Export Citation Format

Share Document