scholarly journals Compliant Robot Actuation by Feedforward Controlled Emulated Spring Stiffness

Author(s):  
Katayon Radkhah ◽  
Stefan Kurowski ◽  
Thomas Lens ◽  
Oskar von Stryk
2021 ◽  
Vol 1 (1) ◽  
pp. 93-118
Author(s):  
Benjamin Breiling ◽  
Bernhard Dieber ◽  
Martin Pinzger ◽  
Stefan Rass

With the growing popularity of robots, the development of robot applications is subject to an ever increasing number of additional requirements from e.g., safety, legal and ethical sides. The certification of an application for compliance to such requirements is an essential step in the development of a robot program. However, at this point in time it must be ensured that the integrity of this program is preserved meaning that no intentional or unintentional modifications happen to the program until the robot executes it. Based on the abstraction of robot programs as workflows we present in this work a cryptography-powered distributed infrastructure for the preservation of robot workflows. A client composes a robot program and once it is accepted a separate entity provides a digital signature for the workflow and its parameters which can be verified by the robot before executing it. We demonstrate a real-world implementation of this infrastructure using a mobile manipulator and its software stack. We also provide an outlook on the integration of this work into our larger undertaking to provide a distributed ledger-based compliant robot application development environment.


Author(s):  
Tiancheng Zhou ◽  
Caihua Xiong ◽  
Juanjuan Zhang ◽  
Di Hu ◽  
Wenbin Chen ◽  
...  

Abstract Background Walking and running are the most common means of locomotion in human daily life. People have made advances in developing separate exoskeletons to reduce the metabolic rate of walking or running. However, the combined requirements of overcoming the fundamental biomechanical differences between the two gaits and minimizing the metabolic penalty of the exoskeleton mass make it challenging to develop an exoskeleton that can reduce the metabolic energy during both gaits. Here we show that the metabolic energy of both walking and running can be reduced by regulating the metabolic energy of hip flexion during the common energy consumption period of the two gaits using an unpowered hip exoskeleton. Methods We analyzed the metabolic rates, muscle activities and spatiotemporal parameters of 9 healthy subjects (mean ± s.t.d; 24.9 ± 3.7 years, 66.9 ± 8.7 kg, 1.76 ± 0.05 m) walking on a treadmill at a speed of 1.5 m s−1 and running at a speed of 2.5 m s−1 with different spring stiffnesses. After obtaining the optimal spring stiffness, we recruited the participants to walk and run with the assistance from a spring with optimal stiffness at different speeds to demonstrate the generality of the proposed approach. Results We found that the common optimal exoskeleton spring stiffness for walking and running was 83 Nm Rad−1, corresponding to 7.2% ± 1.2% (mean ± s.e.m, paired t-test p < 0.01) and 6.8% ± 1.0% (p < 0.01) metabolic reductions compared to walking and running without exoskeleton. The metabolic energy within the tested speed range can be reduced with the assistance except for low-speed walking (1.0 m s−1). Participants showed different changes in muscle activities with the assistance of the proposed exoskeleton. Conclusions This paper first demonstrates that the metabolic cost of walking and running can be reduced using an unpowered hip exoskeleton to regulate the metabolic energy of hip flexion. The design method based on analyzing the common energy consumption characteristics between gaits may inspire future exoskeletons that assist multiple gaits. The results of different changes in muscle activities provide new insight into human response to the same assistive principle for different gaits (walking and running).


1987 ◽  
Vol 109 (4) ◽  
pp. 402-406 ◽  
Author(s):  
Go¨ran Gerbert ◽  
Jacques de Mare´

There are many applications in mechanical design where load distribution is modelled with parallel springs. Here random variation in spring length and spring stiffness is considered. Length variation is assumed to be the major influence and the case with uniform distribution is analyzed in detail. Small variations in spring stiffness are included. Numerical results are given. A simple formula is presented which gives the maximal length deviation as a function of the number of springs. The formula is based on a 10 percent failure risk which is a common number in practical mechanical design.


Robotica ◽  
2016 ◽  
Vol 35 (8) ◽  
pp. 1732-1746 ◽  
Author(s):  
Loris Roveda ◽  
Nicola Pedrocchi ◽  
Federico Vicentini ◽  
Lorenzo Molinari Tosatti

SUMMARYLight-weight manipulators are used in industrial tasks mounted on mobile platforms to improve flexibility. However, such mountings introduce compliance affecting the tasks. This work deals with such scenarios by designing a controller that also takes into account compliant environments. The controller allows the tracking of a target force using the estimation of the environment stiffness (EKF) and the estimation of the base position (KF), compensating the robot base deformation. The closed-loop stability has been analyzed. Observers and the control law have been validated in experiments. An assembly task is considered with a standard industrial non-actuated mobile platform. Control laws with and without base compensation are compared.


Author(s):  
Thomas M. Pigoski ◽  
Joseph Duffy

Abstract A closed-form inverse force analysis was performed on a planar two-spring system. The two springs were grounded to pivots at one end and attached to a common pivot at the other. A known force was applied to the common pivot of the system, and it was required to determine all of the assembly configurations. By variable elimination, a sixth degree polynomial in the resultant length of one spring was derived, and from this, six real solutions of the point of application of force were obtained. Following this, the applied force was incremented along a line and the six paths of the moving pivot were tracked starting from the zero-load configurations. An analysis of these results showed stability phenomena indicating the workspace of this system contained regions of negative spring stiffness and points of catastrophe.


Author(s):  
Larry L. Howell ◽  
Ashok Midha

Abstract Compliant mechanisms gain some or all of their mobility from the flexibility of their members rather than from rigid-body joints only. More efficient and usable analysis and design techniques are needed before the advantages of compliant mechanisms can be fully utilized. In an earlier work, a pseudo-rigid-body model concept, corresponding to an end-loaded geometrically nonlinear, large-deflection beam, was developed to help fulfill this need. In this paper, the pseudo-rigid-body equivalent spring stiffness is investigated and new modeling equations are proposed. The result is a simplified method of modeling the force/deflection relationships of large-deflection members in compliant mechanisms. Flexible segments which maintain a constant end angle are discussed, and an example mechanism is analyzed. The resulting models are valuable in the visualization of the motion of large-deflection systems, as well as the quick and efficient evaluation and optimization of compliant mechanism designs.


Sign in / Sign up

Export Citation Format

Share Document