The effect of micro-SiO2 and micro-Al2O3 additive on the strength properties of ceramic powder-based geopolymer pastes

Ceramic materials are largely used in all over the world and consequently, large quantities of wastes are produced simultaneously by tile manufacturers and construction industry. Nevertheless, part of these wastes and those produced by the construction industry are dumped in landfills. This paper presents the effect of using ceramic waste in mortar as cement replacement. Four mortar mixes were prepared in this study and focuses on the effect of ceramic powder as cement replacement on the strength development and the morphology of the mortar. The microstructural characteristics of the mortar were investigated by scanning field emission electron microscopy (FESEM) and the mineralogical properties was investigated using the X-ray diffraction (XRD). The cement was replaced by ceramic powder from 0% to 60% by weight of cement. The specimens were cast in 50 x 50 x 50 mm cube and water curing regime was used until the age of testing. The fineness of ceramic powder used is less than 45µm. The developments of compressive strength were studied for all samples. It is found that the optimum replacement that gave the highest strength was 40% replacement. It was also found that the use of ceramic powder enhanced the microstructure and strength properties of the mortar.

Download Full-text

Comparative study on strength properties of cement mortar by partial replacement of cement with ceramic powder and silica fume

10.1063/1.5038702 ◽

2018 ◽

Author(s):

Ch. Himabindu ◽

Ch. Geethasri ◽

N. Hari

Keyword(s):

Comparative Study ◽

Silica Fume ◽

Cement Mortar ◽

Ceramic Powder ◽

Strength Properties ◽

Partial Replacement

Download Full-text

SEM Study of Tension Wood Fiber Morphology and its Effect on Paper Properties

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100079061 ◽

1977 ◽

Vol 35 ◽

pp. 308-309

Author(s):

K. W. Robinson

Keyword(s):

Tension Wood ◽

Wood Fiber ◽

Strength Properties ◽

Fiber Morphology ◽

Paper Properties ◽

Pure Cellulose ◽

Short Rotation ◽

Hardwood Trees ◽

Sem Study

Tension wood (TW) is an abnormal tissue of hardwood trees; although it has been isolated from most parts of the tree, it is frequently found on the upper side of branches and leaning stems. TW has been classically associated with geotropic alignment, but more recently it has been associated with fast growth. Paper made from TW is generally lower in strength properties. Consequently, the paper industries' growing dependence on fast growing, short- rotation trees will result in higher amounts of TW in the final product and a corresponding reduction in strength.Relatively few studies have dealt with the role of TW in the structure of paper. It was suggested that the lower strength properties of TW were due to a combination of factors, namely, its unique morphology, compression failures in the cell wall, and lower hemicellulose content. Central to the unique morphology of the TW fiber is the thick gelatinous layer (G-layer) composed almost entirely of pure cellulose.

Download Full-text

Crystallization of MgO • Al2 • SiO2 • ZrO2 glasses

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100143778 ◽

1986 ◽

Vol 44 ◽

pp. 440-441

Author(s):

M. A. McCoy

Keyword(s):

Mechanical Properties ◽

Heat Treatment ◽

Powder Processing ◽

Glass Composition ◽

Ceramic Powder ◽

Transformation Toughening ◽

Ceramic Powder Processing ◽

Processing Techniques ◽

Ceramic Matrices

Transformation toughening by ZrO2 inclusions in various ceramic matrices has led to improved mechanical properties in these materials. Although the processing of these materials usually involves standard ceramic powder processing techniques, an alternate method of producing ZrO2 particles involves the devtrification of a ZrO2-containing glass. In this study the effects of glass composition (ZrO2 concentration) and heat treatment on the morphology of the crystallization products in a MgO•Al2•SiO2•ZrO2 glass was investigated.

Download Full-text

The Effect of Growth Rate on the Strength Properties of Sawn Beams of Silver Birch (Betula pendula Roth)

Scandinavian Journal of Forest Research ◽

10.1080/02827589950152250 ◽

1999 ◽

Vol 14 (1) ◽

pp. 18-26

Author(s):

R. A. Dunham ◽

A. D. Cameron ◽

J. A. Petty

Keyword(s):

Growth Rate ◽

Betula Pendula ◽

Strength Properties ◽

Silver Birch ◽

Betula Pendula Roth

Download Full-text

Modification of polymer matrix for carbon fiber reinforced plastic aimed at the increase of interfacial bond strength, deformation-strength properties and stability to thermal-oxidative destruction

Polymer materials and technologies ◽

10.32864/polymmattech-2017-3-4-19-36 ◽

2017 ◽

Vol 3 (4) ◽

pp. 19-36 ◽

Cited By ~ 1

Author(s):

V. I. Dubkova ◽

O. I. Maevskaya ◽

S. F. Zhandarov

Keyword(s):

Carbon Fiber ◽

Bond Strength ◽

Strength Properties ◽

Carbon Fiber Reinforced Plastic ◽

Oxidative Destruction ◽

Interfacial Bond ◽

Interfacial Bond Strength ◽

Fiber Reinforced Plastic ◽

Reinforced Plastic ◽

Thermal Oxidative Destruction

Download Full-text

Co-cooking nonwoods with hardwoods

TAPPI Journal ◽

10.32964/tj13.6.19 ◽

2014 ◽

Vol 13 (6) ◽

pp. 19-24

Author(s):

TROY RUNGE ◽

CHUNHUI ZHANG

Keyword(s):

High Performance Liquid Chromatography ◽

High Performance ◽

Paper Industry ◽

Pulp And Paper Industry ◽

Strength Properties ◽

Agricultural Residues ◽

Kraft Pulping ◽

Pulp And Paper ◽

Strength Increase ◽

Xylan Content

Agricultural residues and energy crops are promising resources that can be utilized in the pulp and paper industry. This study examines the potential of co-cooking nonwood materials with hardwoods as means to incorporate nonwood material into a paper furnish. Specifically, miscanthus, switchgrass, and corn stover were substituted for poplar hardwood chips in the amounts of 10 wt %, 20 wt %, and 30 wt %, and the blends were subjected to kraft pulping experiments. The pulps were then bleached with an OD(EP)D sequence and then refined and formed into handsheets to characterize their physical properties. Surprisingly, all three co-cooked pulps showed improved strength properties (up to 35%). Sugar measurement of the pulps by high-performance liquid chromatography suggested that the strength increase correlated with enriched xylan content.

Download Full-text

Chemical, anatomical, and technology aspects of Eucalyptus benthamii and Eucalyptus dunii for use in an integrated pulp and paper mill

TAPPI Journal ◽

10.32964/tj14.2.73 ◽

2015 ◽

Vol 14 (2) ◽

pp. 73-81 ◽

Cited By ~ 5

Author(s):

GISELY SAMISTRARO ◽

PETER W. HART ◽

JORGE LUIZ COLODETTE ◽

RICARDO PAIM

Keyword(s):

Energy Levels ◽

Black Liquor ◽

Basic Density ◽

Paper Mill ◽

Frost Tolerance ◽

Strength Properties ◽

Kappa Number ◽

Pulp Yield ◽

Chemical Compositions ◽

Physical Strength

Eucalyptus dunii has been commercially used in southern Brazil because of its relatively good frost tolerance and adequate productivity in the winter months. More recently, interest has grown in cultivating Eucalyptus benthamii Maiden & Cambage, which presents even superior frost tolerance compared to E. dunii and is highly productive as well. The quality of E. benthamii for pulp production is not yet proven. Thus, the chemical, anatomical, and technological aspects of pulp made from E. benthamii were compared with those of E. dunii for unbleached paper production. Samples of E. benthamii chips were obtained and analyzed for their basic density, chemical composition, higher heating value, trace elemental analysis, and chip size distribution. The chips were kraft cooked using conditions that produced a 74 ± 6 kappa number. The pulps were characterized for kappa number, yield, viscosity, and morphologic characteristics (e.g., length, wall thickness, and coarseness). Black liquor was analyzed for total solids, organics, inorganics, sodium sulfide, sodium hydroxide, and sodium carbonate. Brownstocks were beaten at five different energy levels in a Valley beater, and the physical strength properties of 120 g/m² handsheets were measured to develop a beater curve. The results of this study showed differences in delignification between the two woods and lower pulp yield for E. benthamii , which are related to their chemical compositions and basic densities. The E. benthamii studied in this work exhibited higher amounts of lignin and extractives, lower carbohydrate content, and lower basic density. However, cooking a blend of the two woods afforded good results in pulping and in physical pulp properties.

Download Full-text

Pilot trials of hemicelluloses extraction prior to thermomechanical pulp production: Part 1

TAPPI Journal ◽

10.32964/tj10.5.21 ◽

2011 ◽

Vol 10 (5) ◽

pp. 21-28 ◽

Cited By ~ 13

Author(s):

CARL HOUTMAN ◽

ERIC HORN

Keyword(s):

Oxalic Acid ◽

Energy Savings ◽

Wood Chip ◽

Strength Properties ◽

Thermomechanical Pulp ◽

Sugar Solution ◽

Bisulfite Treatment ◽

Pilot Trials ◽

Pulp Production ◽

Production Part

Pilot data indicate that wood chip pretreatment with oxalic acid reduced the specific energy required to make thermomechanical pulp. A combined oxalic acid/bisulfite treatment resulted in 21% refiner energy savings and 13% increase in brightness for aspen. A low level of oxalic acid treatment was effective for spruce. Energy savings of 30% was observed with no significant change in strength properties. Adding bisulfite did not significantly increase the brightness of the spruce pulp. For pine, the optimum treatment was a moderate level of oxalic acid, which resulted in 34% energy savings and an increase in strength properties. For all of these treatments 1–3 w/w % carbohydrates were recovered, which can be fermented to produce ethanol. The extract sugar solution contained significant quantities of arabinose.

Download Full-text