Recommendations for a Quantitative Description of Joint Orientation Data

2018 ◽  
Vol 37 (3) ◽  
pp. 1503-1514
Author(s):  
Marie-Hélène Fillion ◽  
John Hadjigeorgiou
2021 ◽  
Vol 906 (1) ◽  
pp. 012103
Author(s):  
Alberto Bolla ◽  
Alberto Beinat ◽  
Paolo Paronuzzi ◽  
Chiara Peloso

Abstract The present work shows the results of a combined field and Structure from Motion (SfM) survey performed on the detachment surface of a shallow rockslide that occurred in the Rosandra Valley (Trieste, NE Italy), which was aimed at testing the use of 3D models obtained from Remote Sensing (RS) techniques to identify joint sets affecting unstable rock masses. According to discontinuity orientation data acquired from the field (N = 223), the investigated rock mass is affected by at least nine joint sets characterised by a notable variability. The extraction of joint sets from the 3D point cloud representing the surveyed rock outcrop was strongly sensitive to the point cloud density and the values of the controlling parameters of the density function embedded within the discontinuity extractor. This work demonstrates that, in order to properly identify rock joint sets, the exclusive application of a RS approach cannot fully substitute the traditional field survey, and the estimation of discontinuity sets should be integrated with joint orientation data acquired using a geological compass. To maximise its capabilities, the semi-automatic discontinuity set extraction from 3D point clouds should always be supported by a significant statistical sample of joint orientation measurements that are preliminarily collected from the field.


2014 ◽  
Vol 891-892 ◽  
pp. 929-935 ◽  
Author(s):  
Alain Franz Knorr ◽  
Michael Marx

One problem of the quantitative description of small fatigue crack propagation is the fluctuating crack growth rate induced by obstacles like grain or phase boundaries. Sometimes cracks stop completely for a large number of cycles sometimes cracks only decelerate, both resulting in an additional number of life time cycles. However, so far it is not clear, what actually determines the resistance of a grain boundary against fatigue cracks. Therefore we investigate small crack propagation through grain boundaries systematically by in-situ imaging in the scanning electron microscope and focused ion beam (FIB) crack initiation. By this unique technique, artificial stage I cracks with constant crack parameters can be observed while interacting with different grain boundaries which gives detailed information on the interaction mechanisms. We identified different useful aspects of the interaction between microcracks and microstructural barriers on the microscopic scale. 3D-tomographs revealed by serial sectioning and FIB give information about the transition process from the initial grain to the neighbouring one. The resulting purely geometrical consideration leads to a quantitative description of the blocking effect of grain boundaries and can be used to calculate the probability of a crack transfer from the orientation data of two neighboring grains only.


Author(s):  
N. V. Larcher ◽  
I. G. Solorzano

It is currently well established that, for an Al-Ag alloy quenched from the α phase and aged within the metastable solvus, the aging sequence is: supersaturated α → GP zones → γ’ → γ (Ag2Al). While GP zones and plate-shaped γ’ are metastable phases, continuously distributed in the matrix, formation of the equilibrium phase γ takes place at grain boundaries by discontinuous precipitation (DP). The crystal structure of both γ’ and γ is hep with the following orientation relationship with respect to the fee α matrix: {0001}γ′,γ // {111}α, <1120>γ′,γ, // <110>α.The mechanisms and kinetics of continuous matrix precipitation (CMP) in dilute Al-Ag alloys have been studied in considerable detail. The quantitative description of DP kinetics, however, has received less attention. The present contribution reports the microstructural evolution resulting from aging an Al-Ag alloy with Ag content higher than those previously reported in the literature, focusing the observations of γ' plate-shaped metastable precipitates.


2020 ◽  
Vol 21 (1) ◽  
pp. 102-117
Author(s):  
Novia Zalmita ◽  
Muhajirah Muhajirah ◽  
Abdul Wahab Abdi

One that influences human resource indicators is education. The teacher is a profession as a job of academic specialization in a relatively long time in college. Understanding related to teacher competence is very important to have by a prospective teacher because it can affect the quality of performance as a professional teacher. The teacher's competence is known as pedagogic, professional, social and personality competencies. The issue in this study is how the competency of the teacher of the Department of Geography Education FKIP Unsyiah as a prospective teacher of geography? The purpose of this study was to determine the competence of teachers in the Department of Geography Education FKIP Unsyiah as prospective geography teachers. Quantitative description approach is used in this study to find answers to the issue. The population in this study were students of the Department of Geography Education FKIP Unsyiah class of 2015 and 2016 who had been declared to have passed the Micro Teaching and Magang Kependidikan 3 course totaling 50 people. Because the population is small and can be reached, the determination of the sample using total sampling techniques so that the sample in this study is the whole population. Data collection is done by distributing test questions to respondents. The data was analyzed using the descriptive statistics percentage formula. The results of the study indicate that the level of teacher competence of Geography Education Department students as prospective teachers is in the moderate category, namely as many as 22 respondents (44%). A total of 12 respondents (24%) were in the high category, 15 respondents (30%) were in the low category and 1 respondent (2%) were in the very low category.


1998 ◽  
Vol 30 (1) ◽  
pp. 51-69
Author(s):  
A. V. Kryazhimskii ◽  
V. I. Maksimov ◽  
A. A. Solov'ev ◽  
Alexander G. Chentsov

2020 ◽  
Author(s):  
Marc Riera ◽  
Alan Hirales ◽  
Raja Ghosh ◽  
Francesco Paesani

<div> <div> <div> <p>Many-body potential energy functions (PEFs) based on the TTM-nrg and MB-nrg theoretical/computational frameworks are developed from coupled cluster reference data for neat methane and mixed methane/water systems. It is shown that that the MB-nrg PEFs achieve subchemical accuracy in the representation of individual many-body effects in small clusters and enables predictive simulations from the gas to the liquid phase. Analysis of structural properties calculated from molecular dynamics simulations of liquid methane and methane/water mixtures using both TTM-nrg and MB-nrg PEFs indicates that, while accounting for polarization effects is important for a correct description of many-body interactions in the liquid phase, an accurate representation of short-range interactions, as provided by the MB-nrg PEFs, is necessary for a quantitative description of the local solvation structure in liquid mixtures. </p> </div> </div> </div>


Author(s):  
Debi Angelina Br. Barus

This study aims to determine the relationship of work values with the Batak Toba ethnic. This research was conducted at the Mobile Brigade Unit of the North Sumatra Regional Police. The subjects in this study were 45 people. This study uses a quantitative description approach. The results of the study are to find that hamoraon, hagabeon and hasangapon (3H) are in line with the principle of the work value of Brimob members. 3H is the peak achievement of individual Toba Batak ethnic work value in the mobile brigade unit of the North Sumatra regional police. Keyword: Work value, Batak Toba Etnic   Penelitian ini bertujuan untuk mengetahui hubungan nilai kerja dengan etnis Batak Toba. Penelitian ini dilakukan di Satuan Brigade Mobile Kepolisian Daerah Sumatera Utara. Subjek dalam penelitian ini adalah 45 orang. Penelitian ini menggunakan pendekatan kuantitatif deskripsi. Hasil penelitian adalah menemukan bahwa hamoraon, hagabeon dan hasangapon (3H) sejalan dengan prinsip nilai kerja pada satuan anggota Brimob. 3H merupakan puncak pencapaian dari nilai kerja individu yang beretnis Batak Toba di satuan brigade mobile kepolisian daerah Sumatera Utara. Kata Kunci: Nilai kerja, Etnis Batak Toba


Author(s):  
Anna Monzikova ◽  
Anna Monzikova ◽  
Vladimir Kudryavtsev Vladimir ◽  
Vladimir Kudryavtsev Vladimir ◽  
Alexander Myasoedov ◽  
...  

“Wind-shadowing” effects in the Gulf of Finland coastal zone are analyzed using high resolution Envisat Synthetic Aperture Radar (SAR) measurements and model simulations. These effects are related to the internal boundary layer (IBL) development due to abrupt change the surface roughness at the sea-land boundary. Inside the "shadow" areas the airflow accelerates and the surface wind stress increases with the fetch. Such features can be revealed in SAR images as dark areas adjacent to the coastal line. Quantitative description of these effects is important for offshore wind energy resource assessment. It is found that the surface wind stress scaled by its equilibrium value (far from the coast) is universal functions of the dimensionless fetch Xf/G. Wind stress reaches an equilibrium value at the distance Xf/G of about 0.4.


1988 ◽  
Vol 53 (12) ◽  
pp. 2995-3013
Author(s):  
Emerich Erdös ◽  
Jindřich Leitner ◽  
Petr Voňka ◽  
Josef Stejskal ◽  
Přemysl Klíma

For a quantitative description of the epitaxial growth rate of gallium arsenide, two models are proposed including two rate controlling steps, namely the diffusion of components in the gas phase and the surface reaction. In the models considered, the surface reaction involves a reaction triple - or quadruple centre. In both models three mechanisms are considered which differ one from the other by different adsorption - and impact interaction of reacting particles. In every of the six cases, the pertinent rate equations were derived, and the models have been confronted with the experimentally found dependences of the growth rate on partial pressures of components in the feed. The results are discussed with regard to the plausibility of individual mechanisms and of both models, and also with respect to their applicability and the direction of further investigations.


Sign in / Sign up

Export Citation Format

Share Document