Generation of electrical energy in a microbial fuel cell coupling acetate oxidation to Fe3+ reduction and isolation of the involved bacteria

2021 ◽  
Vol 37 (6) ◽  
Author(s):  
Karina Becerril-Varela ◽  
Jorge H. Serment-Guerrero ◽  
Gauddy Lizeth Manzanares-Leal ◽  
Ninfa Ramírez-Durán ◽  
Claudia Guerrero-Barajas
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electrical Energy ◽  
Acetate Oxidation ◽  
Cell Coupling

scholarly journals Practical Maximum-Power Extraction in Single Microbial Fuel Cell by Effective Delivery through Power Management System

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2312
Author(s):  
Jeongjin Yeo ◽  
Taeyoung Kim ◽  
Jae Jang ◽  
Yoonseok Yang
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Management ◽  
Operation Time ◽  
Electrical Energy ◽  
Maximum Power ◽  
Extraction Technology ◽  
Power Extraction ◽  
Point Tracking ◽  
Power Point

Power management systems (PMSs) are essential for the practical use of microbial fuel cell (MFC) technology, as they replace the unstable stacking of MFCs with step-up voltage conversion. Maximum-power extraction technology could improve the power output of MFCs; however, owing to the power consumption of the PMS operation, the maximum-power extraction point cannot deliver maximum power to the application load. This study proposes a practical power extraction for single MFCs, which reserves more electrical energy for an application load than conventional maximum power-point tracking (MPPT). When experimentally validated on a real MFC, the proposed method delivered higher output power during a longer PMS operation time than MPPT. The maximum power delivery enables more effective power conditioning of various micro-energy harvesting systems.

EXPERIMENTAL STUDY OF BIOELECTRICITY-MICROBIAL FUEL CELL FOR ELECTRICITY GENERATION: PERFORMANCE CHARACTERIZATION AND CAPACITY IMPROVEMENT

2017 ◽  
Vol 79 (5-2) ◽  
Author(s):  
Zul Hasrizal Bohari ◽  
Nur Asyhikin Azhari ◽  
Nuraina Nasuha Ab Rahman ◽  
Mohamad Faizal Baharom ◽  
Mohd Hafiz Jali ◽  
...  
Keyword(s):  
Organic Matter ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Electrical Power ◽  
Electrical Energy ◽  
Sewage Water ◽  
Electricity Production ◽  
Sample Type ◽  
Series Of Experiments ◽  
The Right

Energy trending lately shown the need of new possible renewable energy. This paper studies about the capability and capacity generating of electricity by using Bio-electricity-Microbial Fuel Cell (Bio-MFC). Bio-MFC is the device that converts chemical energy to electrical energy by using microbes that exist in the sewage water. The energy contained in organic matter can be converted into useful electrical power. MFC can be operated by microbes that transfer electrons from anode to cathode for generating electricity. There are two major goals in this study. The first goal is to determine the performance characteristics of MFCs in this application. Specifically we investigate the relationship between the percentages of organic matter in a sample results in higher electricity production of MFCs power by that sample. As a result, the sewage (wastewater) chosen in the second series experiment because the sewage (wastewater) also produced the highest percentage of organic matter which is around 10%. Due to these, the higher percentage of organic matter corresponds to higher electricity production. The second goal is to determine the condition under which MFC work most efficiently to generating electricity. After get the best result of the combination for the electrode, which is combination of zinc and copper (900mV),the third series of experiments was coducted, that show the independent variable was in the ambient temperature. The reasons of these observations will be explained throughout the paper. The study proved that the electricity production of MFC can be increased by selecting the right condition of sample type, temperature and type of electrode. 

scholarly journals Electrical energy production from plant biomass: an analysis model development for Pandanus Amaryllifolius plant microbial fuel cell

2020 ◽  
Vol 18 (3) ◽  
pp. 1163
Author(s):  
Teng Howe Cheng ◽  
Kok Boon Ching ◽  
Chessda Uttraphan ◽  
Yee Mei Heong
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Plant Biomass ◽  
Coulombic Efficiency ◽  
Functional Model ◽  
Electrical Energy ◽  
Microbial Culture ◽  
Analysis Model ◽  
Plant Microbial Fuel Cell ◽  
Pandanus Amaryllifolius

Plant microbial fuel cell (P-MFC) is an electrochemical reactor that converts organic compounds to electrical energy through the catalytic reaction from electrochemically active bacteria (EAB). However, there is no sign of an attempt in developing the functional model in predicting the energy conversion and utilization of P-MFC. In this study, an analytic model is proposed to show the whole production process of the organic compound to electrical energy generation. <em>Pandanus Amaryllifolius</em> plant was used as sources of photosynthate, where biomass product from rhizodeposition, acetate was produced, and soil bacteria as the microbial culture, and air as the input to the cathode chamber. The proposed analytical model is able to predict the output of the P-MFC using the parameters from the experiment. The generated data from the model was then compared with the monitored data from the <em>Pandanus Amaryllifolius </em>P-MFC. The results show the electrical power output has a high similarity pattern with the bacterial growth curve model and able to achieve the coulombic efficiency of 95.32%.

scholarly journals Potential of Root Crops as Source of Electrical Energy

2013 ◽  
pp. 22-39
Author(s):  
Daniel Leslie Tan ◽  
Julie Tan ◽  
Mark Anthony Atanacio ◽  
Ruel Delantar
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Regression Models ◽  
Energy Recovery ◽  
Electrical Energy ◽  
Galvanic Cell ◽  
Waste Waters ◽  
Light Emitting ◽  
Root Crops ◽  
Different Types

Energy from edible and inedible root crop roots and tubers using galvanic cell and processing waste waters through microbial fuel cell (MFC) technology was harnessed. Electrolyte in the roots and tubers was tapped for galvanic cell and the microorganisms from waste waters act as catalyst in MFC. In galvanic cell, the optimized responses of badiang, cassava and sweetpotato were greatly affected by the surface area and distance between anode and cathode electrodes. An increase of nata-de-coco membrane size in MFC increased the voltage and current by 4.94 and 11.71 times, respectively. Increasing the width of anode also enhanced the responses. Different types of microorganisms were isolated from the biofilm anode of MFC. Their growth and proliferation which corresponded to the generation of electricity were also demonstrated in this study. A total of 54 bacterial isolates were collected from the biofilm at the anode of single-chamber MFC (SCMFC). The generated electricity observed using light emitting diodes (LED) showed potential both for galvanic and microbial fuel cell. The generated regression models are reliable tools in predicting desired outputs for future applications. These promising results demonstrated basic information on the electrical energy recovery from rootcrop waste waters and roots/tubers.

scholarly journals Bioelectricity Production from Microalgae-Microbial Fuel Cell Technology (MMFC)

2018 ◽  
Vol 156 ◽  
pp. 01017 ◽  
Author(s):  
Carlito da Costa ◽  
Hadiyanto
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Renewable Energy Sources ◽  
Electrical Energy ◽  
Innovative Technology ◽  
Cell Technology ◽  
Fuel Cell Technology ◽  
Microalgae Culture ◽  
The One

Microbial fuel cell is an ecological innovative technology producing bioelectricity by utilizing microbes activity. Substituent energy is produced by changing the chemical energy to electrical energy through the catalytic reaction of microorganism. The research aims to find out the potency of bioelectricity produced by microalgae microbial fuel cell technology by utilizing the combination of tapioca wastewater and microalgae cultivation. This research is conducted through the ingredients preparation stage – microalgae culture, wastewater characterization, membrane and graphite activation, and the providing of other supporting equipment. The next stage is the MMFC arrangement, while the last one is bioelectricity measurement. The result of optimal bioelectricity production on the comparison of electrode 2 : 2, the power density is 44,33 mW/m2 on day 6, meanwhile, on that of 1 : 1, 20,18 mW/m2 power density on day 1 is obtained. It shows that bioelectricity can be produced from the combination of tapioca wastewater and microalgae culture through the microalgae-microbial fuel cell (MMFC) technology.This research is expected to be a reference for the next research particularly the one that observes the utilizing of microalgae as the part of new and renewable energy sources.

scholarly journals Microalgae Microbial Fuel Cell (MMFC) using Chlorella vulgaris and “Batik” Wastewater as Bioelectricity

2021 ◽  
Vol 226 ◽  
pp. 00032
Author(s):  
Nadiyah Faizi Polontalo ◽  
Falvocha Alifsmara Joelyna ◽  
Abdullah Malik Islam Filardli ◽  
Hadiyanto Hadiyanto ◽  
Zainul Akmar Zakaria
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Chlorella Vulgaris ◽  
Alternative Energy ◽  
Human Growth ◽  
Electrical Energy ◽  
Anode Chamber ◽  
Graphite Electrodes ◽  
Environmental Friendly ◽  
Metabolic Activities

Nowadays, Indonesia is faced with an increase in human growth, and followed by increasing electricity demand. One of the environmental friendly alternative energy that can solve this problem is microbial fuel cell, which utilizes organic matter as a substrate of bacteria in carrying out its metabolic activities to produce electricity. In this study, investigated the electrical energy produced by Microalgae Microbial Fuel Cell (MMFC) using Chlorella vulgaris and “Batik” wastewater. This study aims to assess the performance of the MMFC system based on the influence of yeast (8 g L−1 and 4 g L−1), “Batik wastewater” concentration (50 % and 100 %), and graphite electrodes (1:1 and 2:2). The MMFC system was carried out by filling anode chamber with “Batik” wastewater and the cathode with C. vulgaris. MMFC simulation was operated for 7 d. Concentration of 100 % “Batik” wastewater and 2:2 number of electrodes gave the best result in MMFC with voltage 0.115 Volt, algae absorbance 0.666. The COD decreased from 824 mg L−1 to 752 mg L−1 after the MMFC. The addition of 8 g L−1 yeast gave the optimum of bioelectricity production reached 0.322 Volt and the microalgae grew until the absorbance reached 1.031.

scholarly journals PENGARUH JENIS ELEKTRODA TERHADAP POWER DENSITY PADA MICROBIAL FUEL CELL DENGAN PENAMBAHAN GRANULAR ACTIVATED CARBON

2020 ◽  
Vol 12 (2) ◽  
pp. 1-9
Author(s):  
Vidia Wahyu Meidy Safitri ◽  
Tuhu Agung Rachmanto
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Liquid Waste ◽  
Electrical Energy ◽  
Organic Content ◽  
Energy Utilization ◽  
Pre Treatment

ABSTRAK Limbah cair tahu mengandung kandungan organik tinggi dengan konsentrasi COD 1408 mg/l, TSS 191 mg/l dan pH 4,46.  Salah satu penelitian dengan pemanfaatan limbah dan energi yaitu Microbial Fuel cell (MFC). Energi Kimia senyawa organik dari mikroorganisme akan dirubah menjadi energi listrik dengan reaksi katalik dari mikroorganisme dalam keadaan anaerob merupakan proses microbial fuel cells. Salah satu tantangan untuk mengembangkan sistem MFC adalah dengan memilih elektroda yang tepat. Elektroda yang digunakan harus memiliki daya konduktifitas listrik tinggi, pemukaan yang luas, non korosif, biokompatibel, stabil. Penelitian ini bertujuan untuk memgetahui jenis elektroda optimum dalam menghasilkan power density dengan variasi elektroda karbon grafit, seng dan tembaga, variasi waktu 0, 48, 96, 144, dan 192 jam. Dilakukan pre-treatment koagulasi flokulasi. Hasil penelitian menunjukkan bahwa MFC dengan elektroda karbon grafit dan karbon grafit menghaslikan power density sebesar 2292,994 mW/m2. MFC juga menurunkan konsentrasi COD hingga 88%. Waktu pengolahan dapat mempengaruhi efisiensi penyisihan COD.   Kata kunci: limbah tahu, microbial fuel cell, power density   ABSTRACT   Tofu liquid waste contains high organic content with a COD concentration of 1408 mg / l, TSS 191 mg / l and pH 4.46. One of the researches related to waste and energy utilization is Microbial Fuel cell (MFC). Chemical energy organic compounds from microorganism will be converted into electrical energy by the catalytic reaction of microorganism in anaerobic conditions is a process of microbial fuel cells. One of the challenges to developing an MFC system is to choose the right electrodes. The electrodes used must have high electrical conductivity, a wide surface, non-corrosive, biocompatible, stable. This study aims to find out the most optimum type of electrode in producing power density with variations of carbon graphite, zinc and copper, variations of 0, 48, 96, 144, and 192 hours. The pre-treatment are Coagulation-flocculation. The results showed that MFC with carbon graphite and carbon graphite electrodes produced a power density of 2292,994 mW/m2. MFC also reduces COD concentrations up to 88%. Processing time can affect the efficiency of COD removal.   Keywords: Tofu Liquid Waste, Microbial Fuel Cells, power density

Microbial Fuel Cell for Conversion of Chemical Energy to Electrical Energy from Food Industry Wastewater

2016 ◽  
Vol 9 (6) ◽  
pp. 481-485 ◽  
Author(s):  
Zuraidah Rasep ◽  
Nur Shahirah Mohd. Aripen ◽  
Mohd. Syazwan Mohd. Ghazali ◽  
Norilhamiah Yahya ◽  
Aida Safina Arida ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Food Industry ◽  
Electrical Energy ◽  
Chemical Energy ◽  
Industry Wastewater

scholarly journals BIOELECTROCHEMICAL BEHAVIOR OF WILD TYPE BACILLUS CEREUS IN DUAL CHAMBER MICROBIAL FUEL CELL

2017 ◽  
Vol 18 (2) ◽  
pp. 79-86 ◽  
Author(s):  
M Amirul Islam
Keyword(s):  
Fuel Cell ◽  
Bacillus Cereus ◽  
Microbial Fuel Cell ◽  
Municipal Wastewater ◽  
Electrochemical Impedance ◽  
Electrical Energy ◽  
Charge Transfer Resistance ◽  
Organic Substrates ◽  
Wild Type ◽  
Transfer Resistance

Microbial fuel cell (MFC) is a bioelectrochemical system that uses bacteria as biocatalyst to oxidize organic substrates as well as release electrons, which can be harvested in an external circuit to produce electrical energy. In this study, a proteolytic biocatalyst Bacillus cereus (B. cereus) has been employed for the first time in a microbial fuel cell (MFC). The wild type pure culture was isolated from municipal wastewater and identified using Biolog Gen III analysis. The MFCs were fueled with palm oil mill effluent (POME) and attained the maximum power density of about 3.88 W/m3. The electrochemical behavior of MFC operated by B. cereus was evaluated using polarization curve, electrochemical impedance spectroscopy (EIS) and cyclic voltammetery (CV) analysis. B. Cereus excreated electron shuttling compound which significantly reduced the anode charge transfer resistance (52.95%). The FESEM result shows that B. Cereus has the capability of effective biofilm formation. These results revealed the electrocatalytic potentiality of B. cereus and which makes it a promising candidate to be used in MFCs. Therfore, this biocatlyst can be used to generate electricity through the wastewater valorization.

Sign in / Sign up

Export Citation Format

Share Document