Influence of natural clinoptilolite nanoparticles on thermal stability, scratch resistance and adherence properties of Acrylonitrile butadiene styrene (ABS)

2013 ◽  
Vol 14 (3) ◽  
pp. 447-452 ◽  
Author(s):  
Ali Olad ◽  
Leili Ranjbarian
Keyword(s):  
Thermal Stability ◽  
Acrylonitrile Butadiene Styrene ◽  
Scratch Resistance ◽  
Natural Clinoptilolite ◽  
Butadiene Styrene

Thermal, mechanical and tribological properties of polycarbonate/acrylonitrile-butadiene-styrene blends

2013 ◽  
Vol 33 (6) ◽  
pp. 535-543 ◽  
Author(s):  
Nay Win Khun ◽  
Erjia Liu
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Tribological Properties ◽  
Friction And Wear ◽  
Acrylonitrile Butadiene Styrene ◽  
Scratch Resistance ◽  
Steel Ball ◽  
Mechanical And Tribological Properties ◽  
Thermal Stability Of ◽  
Butadiene Styrene

Abstract Polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS) were blended by varying ABS content. The thermal, mechanical and tribological properties of the PC/ABS blends were systematically characterized. Increasing ABS content in the PC/ABS blends decreased thermal stability of the blends, as a result of the lower thermal stability of the ABS than that of the PC. Although the tensile strength of the PC/ABS blends apparently decreased with increased ABS content, the PC/ABS blend with 10 wt% of ABS had the highest tensile strength, because of improved processability of the blend. The friction and wear of the ABS measured against a steel ball of 6 mm in diameter were higher than those of the PC. As a result, a higher ABS content in the PC/ABS blends resulted in higher friction and wear of the blends. The scratch results showed that scratching with a 5 mm steel ball generated a scratch with a shorter length and lower depth on the PC than on the ABS, which indicated better scratch resistance of the PC. Therefore, the PC/ABS blend with 50 wt% of PC had better scratch resistance than the ABS, due to the influence of the PC embedded in the blend.

A high-temperature dielectric polymer poly(acrylonitrile butadiene styrene) with enhanced energy density and efficiency due to a cyano group

2020 ◽  
Vol 8 (30) ◽  
pp. 15122-15129
Author(s):  
Fei Wen ◽  
Lin Zhang ◽  
Ping Wang ◽  
Lili Li ◽  
Jianguo Chen ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Energy Density ◽  
Elevated Temperatures ◽  
Cyano Group ◽  
Acrylonitrile Butadiene Styrene ◽  
Promising Candidate ◽  
Excellent Thermal Stability ◽  
Poly Acrylonitrile ◽  
Dielectric Polymer ◽  
Butadiene Styrene

An ABS film, which exhibits a high gravimetric energy density of 6.3 J g−1 with satisfactory efficiency, excellent thermal stability, and cycling reliability at elevated temperatures, is a promising candidate for high power energy storage capacitors.

Effect of Fumed Silica and Zinc Borate on the Thermogravimetric Analysis Curves of ABS/Magnesium Hydroxide Composite

2014 ◽  
Vol 599-601 ◽  
pp. 183-186
Author(s):  
Zhang Ting Li ◽  
Yue Qun Lu ◽  
Li Li Fan ◽  
Pei Bang Dai ◽  
Xia Su ◽  
...  
Keyword(s):  
Mechanical Property ◽  
Thermal Stability ◽  
Flame Retardant ◽  
Fumed Silica ◽  
Acrylonitrile Butadiene Styrene ◽  
Zinc Borate ◽  
Processing Temperature ◽  
Great Decrease ◽  
Thermal Stability Of ◽  
Butadiene Styrene

For achieving sufficient flame retardancy, high magnesim hydroxide (MH) content is needed in MH flame retardant Acrylonitrile-butadiene-styrene copolymer (ABS) composites (ABS/MH), which will cause a great decrease in mechanical property and difficulty in preparing samples for measurement. We prepared ABS/MH filled high 60.0% flame retardant by compounding ABS and modified flame retardant MH, fumed silica (SiO2) and zinc borate (ZB) via TX-10 phosphate/polyacrylate latex and studied the effect of a small amount of SiO2 and ZB with MH in ABS for improving the thermal decomposition of ABS/MH. The thermal stability of the modified flame retardant could meet the processing temperature of ABS. The incorporation of ZB, SiO2 or SiO2/ZB could improve the thermal stability of ABS/MH.

Sonochemically Synthesis of Antimonite Nanoparticles and Its Influence on the Thermal Stability of the ABS Terpolymer

2013 ◽  
Vol 32 (4) ◽  
pp. 339-343 ◽  
Author(s):  
Siyamak Bagheriyan
Keyword(s):  
Thermal Stability ◽  
Acrylonitrile Butadiene Styrene ◽  
X Ray Diffraction ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Sonochemical Reaction ◽  
Ft Ir ◽  
Higher Temperature ◽  
Thermal Stability Of ◽  
Butadiene Styrene

AbstractSb2S3 nanoparticles were synthesized via a simple sonochemical reaction between SbCl3 and thioacetamide. The effect of different parameters such as power and time of pulsation on the morphology of the product has been investigated. The Sb2 S3 nanostructures were then added to acrylonitrile-butadiene-styrene terpolymer. The effect of Sb2 S3 nanostructures on the thermal stability of the polymeric matrix has been examined. The thermal decomposition of the nanocomposite shifts towards higher temperature in the presence of the Sb2 S3 . Nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), photoluminescence (PL) spectroscopy, thermogravimetric analysis (TGA), UL-94 and limiting oxygen index (LOI) analysis.

scholarly journals GM-Improved Antiaging Effect of Acrylonitrile Butadiene Styrene in Different Thermal Environments

Polymers ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 46
Author(s):  
Yuchao Wang ◽  
Ming Chen ◽  
Miaoyu Lan ◽  
Zhi Li ◽  
Shulai Lu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Free Radicals ◽  
Oxidation Process ◽  
Oxidative Degradation ◽  
Acrylonitrile Butadiene Styrene ◽  
Active Species ◽  
Tert Butyl ◽  
Thermal Environments ◽  
Thermal Stability Of ◽  
Butadiene Styrene

A stabilizer called 2-tert-butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (GM) was mixed in acrylonitrile butadiene styrene (ABS) with the same amount of 9-bis(octadecyloxy)-2,4,8,10-tetraoxa-3,9-diphosphaspiro[5.5]undecane (DSPDP), octadecyl-3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (Irganox 1076) and tris(3,5-di-tert-butyl-4-hydroxybenzyl) isocyanurate (Irganox 3114) to investigate the influence of additives on the antiaging effect of ABS in oven aging or repeated extrusion aging. It was found that the ABS doped with the GM stabilizer showed a better yellowing resistance and thermal stability than the ABS doped with other antioxidants. Owing to the fact that the stabilizer can act on the free radicals before it has been peroxidized, it could trap the free radicals as a consequence of directly blocking the oxidation process of the active species, thus solving the problem of oxidative degradation of the materials from the source. This work provides guidance for improving thermal stability of ABS, indicating a promising potential for industrial application.

Study on Toughening of Chinese Herb Residue Fiber/Recycled ABS Composites

2014 ◽  
Vol 898 ◽  
pp. 98-101
Author(s):  
Ji Wei Geng ◽  
Ming Yan ◽  
Jin Ping Qu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Impact Strength ◽  
Steam Explosion ◽  
Chinese Herb ◽  
Acrylonitrile Butadiene Styrene ◽  
Fiber Composites ◽  
Thermoplastic Elastomers ◽  
Toughening Agent ◽  
Butadiene Styrene

The Chinese herb residue (CHR) fiber obtained by blasting through a continuous steam explosion device, and recycled acrylonitrile-butadiene-styrene (ABS) were blended to prepare reABS/CHR fiber composites by a vane extruder. Three kinds of thermoplastic elastomers: POE, SEBS and TPU were used to toughen composites. The results of toughening effects, mechanical properties and thermal stability properties show that: there were significant effects of these agents on impact strength; the compatibility not only affects toughening result, but also other properties; the best toughening agent for reABS/CHR fiber composites is TPU.

Sign in / Sign up

Export Citation Format

Share Document