scholarly journals Bio-Inspired Microwave Modulator for High-Temperature Electromagnetic Protection, Infrared Stealth and Operating Temperature Monitoring

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Xuan Yang ◽  
Yuping Duan ◽  
Shuqing Li ◽  
Huifang Pang ◽  
Lingxi Huang ◽  
...  
Keyword(s):  
High Temperature ◽  
Temperature Monitoring ◽  
Effective Bandwidth ◽  
Wave Radiation ◽  
Translational Invariance ◽  
Temperature Range ◽  
Multiple Phase ◽  
Synergistic Enhancement ◽  
Protection Mechanisms ◽  
Temperature Ranges

AbstractHigh-temperature electromagnetic (EM) protection materials integrated of multiple EM protection mechanisms and functions are regarded as desirable candidates for solving EM interference over a wide temperature range. In this work, a novel microwave modulator is fabricated by introducing carbonyl iron particles (CIP)/resin into channels of carbonized wood (C-wood). Innovatively, the spaced arrangement of two microwave absorbents not only achieves a synergistic enhancement of magnetic and dielectric losses, but also breaks the translational invariance of EM characteristics in the horizontal direction to obtain multiple phase discontinuities in the frequency range of 8.2–18.0 GHz achieving modulation of reflected wave radiation direction. Accordingly, CIP/C-wood microwave modulator demonstrates the maximum effective bandwidth of 5.2 GHz and the maximum EM protection efficiency over 97% with a thickness of only 1.5 mm in the temperature range 298–673 K. Besides, CIP/C-wood microwave modulator shows stable and low thermal conductivities, as well as monotonic electrical conductivity-temperature characteristics, therefore it can also achieve thermal infrared stealth and working temperature monitoring in wide temperature ranges. This work provides an inspiration for the design of high-temperature EM protection materials with multiple EM protection mechanisms and functions.

Diapause in the Eggs of Austroicetes cruciata, Sauss. (Acrididae) with particular Reference to the Influence of Temperature on the Elimination of Diapause

1943 ◽  
Vol 34 (1) ◽  
pp. 1-17 ◽  
Author(s):  
H. G. Andrewartha
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Influence Of Temperature ◽  
Temperature Range ◽  
Abnormal Growth ◽  
Inhibition Of Growth ◽  
Stage Of Development ◽  
Influence Of Temperature On ◽  
Temperature Ranges ◽  
The One

Diapause should not be confused with simple inhibition of growth due to cold.The embryo of the grasshopper, Austroicetes cruciata, enters a state of diapause a few days after the egg is laid. The diapause is obligate like that found in the eggs of Circotettix, rather than facultative like that found in the larvae of Platyedra. These types of diapause should be regarded as two extremes of the one phenomenon rather than two distinct phenomena.Diapause was eliminated when the egg was exposed to adequate low temperature for an adequate period when the embryo was at a suitable stage of development. If the period at low temperature was inadequate, or if the embryo was not at a suitable stage of development when the exposure to low temperature occurred, diapause was only partially eliminated. In such cases, the exposure to low temperature resulted in an abnormal growth by the embryo when the egg was returned to a favourable high temperature, but development was not completed.The influence of low temperature on the elimination of diapause was due chiefly to changes which occurred in the yolk during exposure to low temperature. Thus yolk which had been modified in this way became suitable for the nourishment of the embryo, and it no longer obstructed katatrepsis. This explanation of the nature of the obligate diapause in the eggs of Austroicetes brings this phenomenon into line with the facultative diapause in the larvae of Platyedra, which has been shown to be associated with the nourishment of the larva.Diapause was eliminated most rapidly at temperatures between 6°C. and 13°C. The embryo grew most rapidly at about 30°C. ; below 13°C. growth practically ceased. The absence of overlapping of the temperature ranges for these two processes may explain the presence of diapause in Austroicetes. The occurrence of a less pronounced diapause in the eggs of Melanoplus may be due to a partial overlapping of the temperature range for the two processes. Similarly the absence of diapause in the eggs of Locusta may be explained on the assumption that in this species the two processes proceed over the same temperature range.

The reaction of amorphous Ni-Nb films with Si in the presence of a native SiO2 layer

1990 ◽  
Vol 48 (4) ◽  
pp. 664-665
Author(s):  
N. Rozhanski ◽  
A. Barg
Keyword(s):  
High Temperature ◽  
Crystallization Temperature ◽  
Diffusion Barriers ◽  
Sio2 Layer ◽  
Si Substrate ◽  
Cross Sectional ◽  
Plan View ◽  
Temperature Range ◽  
Sputter Deposited

Amorphous Ni-Nb alloys are of potential interest as diffusion barriers for high temperature metallization for VLSI. In the present work amorphous Ni-Nb films were sputter deposited on Si(100) and their interaction with a substrate was studied in the temperature range (200-700)°C. The crystallization of films was observed on the plan-view specimens heated in-situ in Philips-400ST microscope. Cross-sectional objects were prepared to study the structure of interfaces.The crystallization temperature of Ni5 0 Ni5 0 and Ni8 0 Nb2 0 films was found to be equal to 675°C and 525°C correspondingly. The crystallization of Ni5 0 Ni5 0 films is followed by the formation of Ni6Nb7 and Ni3Nb nucleus. Ni8 0Nb2 0 films crystallise with the formation of Ni and Ni3Nb crystals. No interaction of both films with Si substrate was observed on plan-view specimens up to 700°C, that is due to the barrier action of the native SiO2 layer.

NICKELVAC L-605

Alloy Digest ◽  
1967 ◽  
Vol 16 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract NICKELVAC L-605 is a double vacuum melted, cobalt-base alloy for high temperature applications. It is recommended for highly stressed parts operating in the temperature range of 1700 to 2000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-53. Producer or source: Allvac Metals Company, A Teledyne Company.

Study on characteristics of schottky temperature detector based on metal/n-ZnO/n-Si structures

2020 ◽  
Vol 12 ◽  
Author(s):  
Fang Wang ◽  
Jingkai Wei ◽  
Caixia Guo ◽  
Tao Ma ◽  
Linqing Zhang ◽  
...  
Keyword(s):  
High Temperature ◽  
Temperature Measurement ◽  
Temperature Response ◽  
Large Temperature ◽  
Mems Devices ◽  
Temperature Range ◽  
Response Characteristics ◽  
High Temperature Measurement ◽  
Temperature Detector ◽  
Schottky Structure

Background: At present, the main problems of Micro-Electro-Mechanical Systems (MEMS) temperature detector focus on the narrow range of temperature detection, difficulty of the high temperature measurement. Besides, MEMS devices have different response characteristics for various surrounding temperature in the petrochemical and metallurgy application fields with high-temperature and harsh conditions. To evaluate the performance stability of the hightemperature MEMS devices, the real-time temperature measurement is necessary. Objective: A schottky temperature detector based on the metal/n-ZnO/n-Si structures is designed to measure high temperature (523~873K) for the high-temperature MEMS devices with large temperature range. Method: By using the finite element method (FEM), three different work function metals (Cu, Ni and Pt) contact with the n-ZnO are investigated to realize Schottky. At room temperature (298K) and high temperature (523~873K), the current densities with various bias voltages (J-V) are studied. Results: The simulation results show that the high temperature response power consumption of three schottky detectors of Cu, Ni and Pt decreases successively, which are 1.16 mW, 63.63 μW and 0.14 μW. The response temperature sensitivities of 6.35 μA/K, 0.78 μA/K, and 2.29 nA/K are achieved. Conclusion: The Cu/n-ZnO/n-Si schottky structure could be used as a high temperature detector (523~873K) for the hightemperature MEMS devices. It has a large temperature range (350K) and a high response sensitivity is 6.35 μA/K. Compared with traditional devices, the Cu/n-ZnO/n-Si Schottky structure based temperature detector has a low energy consumption of 1.16 mW, which has potential applications in the high-temperature measurement of the MEMS devices.

scholarly journals High-Temperature Deformation of Naturally Aged 7010 Aluminum Alloy

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 581
Author(s):  
Abdulhakim A. Almajid
Keyword(s):  
Activation Energy ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Threshold Stress ◽  
Activation Energies ◽  
Temperature Deformation ◽  
High Temperature Range ◽  
Temperature Range ◽  
True Activation Energy ◽  
Two Temperatures

This study is focused on the deformation mechanism and behavior of naturally aged 7010 aluminum alloy at elevated temperatures. The specimens were naturally aged for 60 days to reach a saturated hardness state. High-temperature tensile tests for the naturally aged sample were conducted at different temperatures of 573, 623, 673, and 723 K at various strain rates ranging from 5 × 10−5 to 10−2 s−1. The dependency of stress on the strain rate showed a stress exponent, n, of ~6.5 for the low two temperatures and ~4.5 for the high two temperatures. The apparent activation energies of 290 and 165 kJ/mol are observed at the low, and high-temperature range, respectively. These values of activation energies are greater than those of solute/solvent self-diffusion. The stress exponents, n, and activation energy observed are rather high and this indicates the presence of threshold stress. This behavior occurred as a result of the dislocation interaction with the second phase particles that are existed in the alloy at the testing temperatures. The threshold stress decreases in an exponential manner as temperature increases. The true activation energy was computed by incorporating the threshold stress in the power-law relation between the stress and the strain. The magnitude of the true activation energy, Qt dropped to 234 and 102 kJ/mol at the low and high-temperature range, respectively. These values are close to that of diffusion of Zinc in Aluminum and diffusion of Magnesium in Aluminum, respectively. The Zener–Hollomon parameter for the alloy was developed as a function of effective stress. The data in each region (low and high-temperature region) coalescence in a segment line in each region.

Creep Behavior of a 4.5% Re Nickel-Base Single Crystal Superalloy at High Temperature

2015 ◽  
Vol 750 ◽  
pp. 139-144 ◽  
Author(s):  
De Long Shu ◽  
Su Gui Tian ◽  
Xin Ding ◽  
Jing Wu ◽  
Qiu Yang Li ◽  
...  
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Single Crystal ◽  
Deformation Mechanism ◽  
Creep Property ◽  
Single Crystal Superalloy ◽  
Micro Cracks ◽  
Initiation And Propagation ◽  
Temperature Ranges ◽  
Nickel Base

By means of heat treatment and creep property measurement, an investigation has made into the creep behaviors of a containing 4.5% Re nickel-base single crystal superalloy at high temperature. Results show that the elements W, Mo and Re are enriched in the dendrite arm regions, the elements Al, Ta, Cr and Co are enriched in the inter-dendrite region, and the segregation extent of the elements may be obviously reduced by means of heat treatment at high temperature. In the temperature ranges of 1070--1100 °C, the 4.5% Re single crystal nickel-based superallloy displays a better creep resistance and longer creep life. The deformation mechanism of the alloy during steady state creep is dislocations slipping in the γ matrix and climbing over the rafted γ′ phase. In the later stage of creep, the deformation mechanism of alloy is dislocations slipping in the γ matrix, and shearing into the rafted γ′ phase, which may promote the initiation and propagation of the micro-cracks at the interfaces of γ/γ′ phases up to the occurrence of creep fracture.

High-Temperature Raman Spectra of CO2 and H2O for Combustion Diagnostics

1981 ◽  
Vol 35 (6) ◽  
pp. 582-584 ◽  
Author(s):  
David A. Stephenson
Keyword(s):  
High Temperature ◽  
Raman Spectra ◽  
Partition Functions ◽  
Temperature Range ◽  
Combustion Diagnostics ◽  
Simple Models

The Raman spectra of CO2 and H2O have been measured from 1000 to 2200°K. The spectra are found to be well described by the simple models described previously. In particular, the simple partition functions of T−1 for CO2 and T−3/2 for H2O are adequate for describing the spectra over the temperature range of interest.

High temperature monitoring the height of condensed water in steam pipes

2011 ◽  
Author(s):  
Yoseph Bar-Cohen ◽  
Shyh-Shiuh Lih ◽  
M. Badescu ◽  
Xiaoqi Bao ◽  
Stewart Sherrit ◽  
...  
Keyword(s):  
High Temperature ◽  
Temperature Monitoring ◽  
Condensed Water ◽  
Steam Pipes

EXPRESS: A Piecewise Model for In Situ Raman Measurement of the Chlorinity of Deep-Sea High-Temperature Hydrothermal Fluids

2021 ◽  
pp. 000370282199911
Author(s):  
meng ge ◽  
Lianfu Li ◽  
Xin Zhang ◽  
Zhendong Luan ◽  
Zengfeng Du ◽  
...  
Keyword(s):  
High Temperature ◽  
Deep Sea ◽  
Okinawa Trough ◽  
Peak Position ◽  
Hydrothermal Fluids ◽  
Calibration Model ◽  
The Okinawa Trough ◽  
Temperature Ranges ◽  
Piecewise Model ◽  
C 50

The chlorinity of deep-sea hydrothermal fluids, representing one of the crucial deep-sea hydrothermal indicators, indicates the degree of deep phase separation of hydrothermal fluids and water/rock reactions. However, accurately measuring the chlorinity of high-temperature hydrothermal fluids is still a significant challenge. In this paper, a piecewise chlorinity model to measure the chlorinity of high-temperature hydrothermal fluids was developed based on the OH stretching band of water, exhibiting an accuracy of 96.20%. The peak position, peak area ratio and F value were selected to establish the chlorinity piecewise calibration model within the temperature ranges of 0-50°C, 50-200°C and 200-300°C. Compared with that of the chlorinity calibration model built based on a single parameter, the accuracy of this piecewise model increased by approximately 4.83-12.33%. This chlorinity calibration model was applied to determine the concentrations of Cl for high-temperature hydrothermal fluids in the Okinawa Trough hydrothermal field.

Sign in / Sign up

Export Citation Format

Share Document