Preparation and characterization of submitochondrial fractions from adrenal cells

This review highlights contributions from my laboratory in which the sites and mechanisms of action of the adrenocorticotropic hormone (ACTH) in the adrenal cortex have been explored. Early studies showing that ACTH stimulates adrenal steroidogenesis by interacting with specific receptors at the cell surface are summarized. Next, the development of a strategy of genetic analysis to define the signalling events that follow ACTH interaction with its receptor is described. This strategy involved the isolation and characterization of mutant adrenal cell lines harboring specific defects in the ACTH-responsive steroidogenic pathway. I describe the isolation and characterization of several of these mutants and demonstrate how these mutants have helped to establish obligatory roles for adenylyl cyclase, cyclic AMP (cAMP), and cAMP-dependent protein kinase in the steroidogenic actions of ACTH. Finally, some of our studies on the regulated expression of the steroidogenic cytochrome P450 enzymes in Y1 adrenal cells are reviewed. These latter studies have led to the discovery of a novel promoter element and transcription factor (designated steroidogenic factor 1) that participates in the coordinate expression of these cytochrome P450 enzymes and that is required for their regulated expression by ACTH and cAMP.Key words: adrenocorticotropic hormone, cyclic AMP, cytochrome P450 genes, steroidogenesis, Y1 adrenocortical tumor cells.

Download Full-text

Partial characterization of mitochondrial G proteins in adrenal cells

Biochimica et Biophysica Acta (BBA) - Biomembranes ◽

10.1016/s0005-2736(99)00185-6 ◽

2000 ◽

Vol 1463 (1) ◽

pp. 99-106 ◽

Cited By ~ 4

Author(s):

Leanne S Sleer ◽

Peter F Hall

Keyword(s):

G Proteins ◽

Partial Characterization ◽

Adrenal Cells

Download Full-text

Isolation and characterization of a cytolysin produced by Vibrio cholerae serogroup non-O1

Canadian Journal of Microbiology ◽

10.1139/m85-135 ◽

1985 ◽

Vol 31 (8) ◽

pp. 711-720 ◽

Cited By ~ 27

Author(s):

Barbara A. McCardell ◽

Joseph M. Madden ◽

Dhirendra B. Shah

Keyword(s):

Vibrio Cholerae ◽

Chinese Hamster Ovary Cells ◽

Chinese Hamster ◽

Fluid Accumulation ◽

Rabbit Skin ◽

Ovary Cells ◽

Adrenal Cells ◽

Adult Mice ◽

Isolation And Characterization

A thermolabile toxin (molecular weight, 52 711; isoelectric point, 8.65) produced by a clinical isolate of Vibrio cholerae serogroup non-O1 was cytotoxic for Y-1 mouse adrenal cells and Chinese hamster ovary cells. The toxin lysed rabbit red blood cells and produced a hemorrhagic zone in rabbit skin. When injected intravenously into adult mice, the cytolysin was rapidly lethal and caused fluid accumulation in both 5- and 18-h rabbit ileal loops. Strains of V. cholerae that produced cytolysin but no cholerae enterotoxin were able to cause fluid accumulation in rabbit intestinal loops.

Download Full-text

Morphological Characterization of Mycobacteriophage R1

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100051281 ◽

1974 ◽

Vol 32 ◽

pp. 254-255

Author(s):

B. L. Soloff ◽

T. A. Rado

Keyword(s):

Carbon Source ◽

Stationary Phase ◽

Growth Phase ◽

Minimal Medium ◽

Morphological Characterization ◽

Logarithmic Growth Phase ◽

Complete Lysis ◽

Lysogenic Culture ◽

Logarithmic Growth

Mycobacteriophage R1 was originally isolated from a lysogenic culture of M. butyricum. The virus was propagated on a leucine-requiring derivative of M. smegmatis, 607 leu−, isolated by nitrosoguanidine mutagenesis of typestrain ATCC 607. Growth was accomplished in a minimal medium containing glycerol and glucose as carbon source and enriched by the addition of 80 μg/ ml L-leucine. Bacteria in early logarithmic growth phase were infected with virus at a multiplicity of 5, and incubated with aeration for 8 hours. The partially lysed suspension was diluted 1:10 in growth medium and incubated for a further 8 hours. This permitted stationary phase cells to re-enter logarithmic growth and resulted in complete lysis of the culture.

Download Full-text

AEM analysis of crystallization in Ti-based amorphous alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075142 ◽

1983 ◽

Vol 41 ◽

pp. 270-271

Author(s):

A.R. Pelton ◽

A.F. Marshall ◽

Y.S. Lee

Keyword(s):

Magnetic Properties ◽

Amorphous Alloys ◽

Amorphous Materials ◽

Isothermal Annealing ◽

Amorphous Matrix ◽

Nucleation And Growth ◽

Current Interest ◽

Amorphous Films ◽

Electrical And Magnetic Properties

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Download Full-text

Characterization of Coherent, Ordered Precipitates in Nickel-Base Alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071168 ◽

1973 ◽

Vol 31 ◽

pp. 144-145

Author(s):

B. H. Kear ◽

J. M. Oblak

Keyword(s):

Stable Phase ◽

Nickel Base Superalloy ◽

Alloy 718 ◽

Commercial Alloy ◽

Precipitate Morphology ◽

Continuous Precipitation ◽

Nickel Base ◽

Base Superalloy ◽

Strengthening Precipitate

A nickel-base superalloy is essentially a Ni/Cr solid solution hardened by additions of Al (Ti, Nb, etc.) to precipitate a coherent, ordered phase. In most commercial alloy systems, e.g. B-1900, IN-100 and Mar-M200, the stable precipitate is Ni3 (Al,Ti) γ′, with an LI2structure. In A lloy 901 the normal precipitate is metastable Nis Ti3 γ′ ; the stable phase is a hexagonal Do2 4 structure. In Alloy 718 the strengthening precipitate is metastable γ″, which has a body-centered tetragonal D022 structure.Precipitate MorphologyIn most systems the ordered γ′ phase forms by a continuous precipitation re-action, which gives rise to a uniform intragranular dispersion of precipitate particles. For zero γ/γ′ misfit, the γ′ precipitates assume a spheroidal.

Download Full-text

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071107 ◽

1973 ◽

Vol 31 ◽

pp. 132-133 ◽

Cited By ~ 1

Author(s):

R. E. Herfert

Keyword(s):

Surface Characterization ◽

Analytical Techniques ◽

X Ray Diffraction ◽

Depth Of Penetration ◽

X Ray ◽

The Past ◽

Transmission Electron ◽

Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Download Full-text

Skeletal elements of crinoid echinoderms: High-resolution structural and microanalytical results

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100074768 ◽

1983 ◽

Vol 41 ◽

pp. 194-195

Author(s):

D. F. Blake ◽

L. F. Allard ◽

D. R. Peacor

Keyword(s):

High Resolution ◽

Marine Invertebrates ◽

Sea Urchins ◽

Structural Features ◽

Sea Stars ◽

High Resolution Tem ◽

Relationship Of ◽

The Relationship ◽

Insight Into

Echinodermata is a phylum of marine invertebrates which has been extant since Cambrian time (c.a. 500 m.y. before the present). Modern examples of echinoderms include sea urchins, sea stars, and sea lilies (crinoids). The endoskeletons of echinoderms are composed of plates or ossicles (Fig. 1) which are with few exceptions, porous, single crystals of high-magnesian calcite. Despite their single crystal nature, fracture surfaces do not exhibit the near-perfect {10.4} cleavage characteristic of inorganic calcite. This paradoxical mix of biogenic and inorganic features has prompted much recent work on echinoderm skeletal crystallography. Furthermore, fossil echinoderm hard parts comprise a volumetrically significant portion of some marine limestones sequences. The ultrastructural and microchemical characterization of modern skeletal material should lend insight into: 1). The nature of the biogenic processes involved, for example, the relationship of Mg heterogeneity to morphological and structural features in modern echinoderm material, and 2). The nature of the diagenetic changes undergone by their ancient, fossilized counterparts. In this study, high resolution TEM (HRTEM), high voltage TEM (HVTEM), and STEM microanalysis are used to characterize tha ultrastructural and microchemical composition of skeletal elements of the modern crinoid Neocrinus blakei.

Download Full-text