Multireflection of electromagnetic waves by double layers made from composite materials

1990 ◽  
Vol 7 (1-2) ◽  
pp. 43-48 ◽  
Author(s):  
M.K. Abdelazeez ◽  
M.S. Ahmad
2012 ◽  
Vol 450-451 ◽  
pp. 387-391
Author(s):  
Yue Fei Yao ◽  
Shan Li ◽  
Ya Qin Fu

Single layer PET Fabric/polyvinyl chloride (PVC) composite materials and double layers PET fabric/polyvinyl chloride (PVC) composite materials with super thin thickness, lightweight, flexible and high strength were manufactured by means of the infusion technology under normal pressure. The sound insulation performance of these novel materials was evaluated with a two-channel acoustic analyzer. The structure and mechanical properties were investigated by mechanical tests and SEM observation. The results show that for the small surface density the double layers composite has better sound insulation performance than that of the single one. But with increment of surface density, the difference between them becomes small, and for the surface density larger than 1.3kg/m2, the sound insulation performance becomes inverse on layers, i.e., the single layer composite has better sound insulation performance than that of double layers one. Therefore, difference structures of composites can be developed based on sound wave features.


Polimery ◽  
2020 ◽  
Vol 65 (07/08) ◽  
pp. 542-549
Author(s):  
ANDRZEJ VOGT ◽  
JACEK W. KACZMAR ◽  
PAULINA MAYER ◽  
ALEKSANDRA BRZOSTEK ◽  
LESZEK NOWOSIELSKI ◽  
...  

2004 ◽  
Vol 22 (6) ◽  
pp. 2081-2096 ◽  
Author(s):  
V. Génot ◽  
P. Louarn ◽  
F. Mottez

Abstract. Investigating the process of electron acceleration in auroral regions, we present a study of the temporal evolution of the interaction of Alfvén waves (AW) with a plasma inhomogeneous in a direction transverse to the static magnetic field. This type of inhomogeneity is typical of the density cavities extended along the magnetic field in auroral acceleration regions. We use self-consistent Particle In Cell (PIC) simulations which are able to reproduce the full nonlinear evolution of the electromagnetic waves, as well as the trajectories of ions and electrons in phase space. Physical processes are studied down to the ion Larmor radius and electron skin depth scales. We show that the AW propagation on sharp density gradients leads to the formation of a significant parallel (to the magnetic field) electric field (E-field). It results from an electric charge separation generated on the density gradients by the polarization drift associated with the time varying AW E-field. Its amplitude may reach a few percents of the AW E-field. This parallel component accelerates electrons up to keV energies over a distance of a few hundred Debye lengths, and induces the formation of electron beams. These beams trigger electrostatic plasma instabilities which evolve toward the formation of nonlinear electrostatic structures (identified as electron holes and double layers). When the electrostatic turbulence is fully developed we show that it reduces the further wave/particle exchange. This sequence of mechanisms is analyzed with the program WHAMP, to identify the instabilities at work and wavelet analysis techniques are used to characterize the regime of energy conversions (from electromagnetic to electrostatic structures, from large to small length scales). This study elucidates a possible scenario to account for the particle acceleration and the wave dissipation in inhomogeneous plasmas. It would consist of successive phases of acceleration along the magnetic field, the development of an electrostatic turbulence, the thermalization and the heating of the plasma. Space plasma physics (charged particle motion and acceleration; numerical studies).


Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 590 ◽  
Author(s):  
Nikolai A. Dugin ◽  
Tatiana M. Zaboronkova ◽  
Catherine Krafft ◽  
Grigorii R. Belyaev

Applications of metamaterials to microwave antennas are reviewed over the past decade. The manufacturing of microwave antennas using graphene-containing carbon composite materials was developed and prototypes of dipole and horn antennas made from such materials were created. The radiation properties of the designed antennas and their metal analogs were measured and compared. The standing wave ratios, the radiation patterns and the amplitude-frequency characteristics were analyzed for horn antennas at frequencies 1.6 GHz and 5 GHz and for dipole antennas in the frequency range 0.2–0.6 GHz. The polarization characteristics of the horn antennas were studied. The effects of different carbon composite materials’ structures (fiber or fabric) on the antennas’ parameters were estimated. It is shown that antennas made from graphene-containing composite materials are able to operate efficiently and exhibit almost the same radiation properties as conventional metal antennas of the same geometry and size. However, the carbon-based antennas have much smaller weights and enhanced stability in a wide range of temperatures. In the future, such antennas should replace the conventional ones for many applications, especially for the excitation and reception of electromagnetic waves in space plasmas.


2019 ◽  
Vol 29 (1) ◽  
pp. 63
Author(s):  
Hong Thi Minh Nguyen ◽  
Duy Van Nguyen ◽  
Co Dang Nguyen ◽  
Tu Dinh Bui ◽  
Thang Duc Pham

Electromagnetic pollution in general and the harmful effects of microwave radiation in particular on environment is currently in the urgent stage. To eliminate the effect of electromagnetic energy the most common methods relies on the use of absorbing materials with large absorption capacities in wide frequency band. In this paper, we investigate the capability of absorption of electromagnetic waves of Fe3O4 nanoparticles in paraffin basis. The Fe3O4/paraffin composite materials were prepared with a weight ratio of 35%/65%. The dielectric constant (εr) and the magnetic permeability (μr) in the frequency (f) range from 8 to 18 GHz were measured for various sample thicknesses. The results indicated a large dielectric loss and strong thickness dependence of absorption capacity. The maximum absorption coefficient (RL) is of order -13.6 dB, corresponding to the achieved absorbance of 96,9% for the 2.6 mm of sample thickness. The experimental results are consisted with our simulation calculation.


2015 ◽  
Vol 1114 ◽  
pp. 76-80
Author(s):  
Elena Valentina Stoian ◽  
Vasile Bratu ◽  
Florina Violeta Anghelina ◽  
Ileana Nicoleta Popescu

Rapid developments in telecommunications and digital processing of information are facing the problem of electromagnetic wave pollution and interference. The aim of this article is the characterization at microwave frequencies of composite materials based on silicone rubber. These materials contain 80% siloxane rubber and only 20% powdery feeling like nanocarbon and pyrite cinder. To achieve these objectives were reviewed and selected raw materials and characteristics were determined in a structural material, the electromagnetic attenuation as well as electrically, by making measurements of electrical conductivity of thin layers of polymer matrix composites produced by the doctor blade technique. Starting from sample siloxane rubber, i.e. without additives or filler reinforcement in compression analysis we find that reinforcing agents leads to increased values of the modulus of elasticity in especially for pyrite ashes. For materials analyzed in this paper, measurements were made in the frequency range between (1-18) GHz and have found high attenuation over 45 dB in the case of composite materials with pyrite ash filler. So we can say that this materials can used for shielding against electromagnetic waves in order to protect the human factor. The novelty of the paper consists in the compositions of the specimens and their mechanical and electromagnetic characteristics.


2017 ◽  
Vol 35 (6) ◽  
pp. 1241-1248
Author(s):  
Raymond Pottelette ◽  
Matthieu Berthomier

Abstract. It is known from laboratory plasma experiments that double layers (DLs) radiate in the electromagnetic spectrum; but this is only known qualitatively. In these experiments, it was shown that the electron beam created on the high-potential side of a DL generates nonlinear structures which couple to electromagnetic waves and act as a sender antenna. In the Earth auroral region, observations performed by auroral spacecraft have shown that DLs occur naturally in the source region of intense radio emissions called auroral kilometric radiation (AKR). Very high time-, spatial-, and temporal-resolution measurements are needed in order to characterize waves and particle distributions in the vicinity of DLs, which are moving transient structures. We report observations from the FAST satellite of a localized large-amplitude parallel electric field (∼ 300 mV m−1) recorded at the edges of the auroral density cavity. In agreement with laboratory experiments, on the high-potential side of the DL, elementary radiation events are detected. They occur substantially above the local electron gyrofrequency and are associated with the presence of electron holes. The velocity of these nonlinear structures can be derived from the measurement of the Doppler-shifted AKR frequency spectrum above the electron gyrofrequency. The generated electron holes appear as the nonlinear evolution of electrostatic waves generated by the electron–electron two-stream instability because they propagate at about half the beam velocity. It is pointed out that, in the vicinity of a DL, the shape of the electron distribution gives rise to a significant power recorded in the left-hand polarized ordinary (LO) mode.


2021 ◽  
Vol 3 (6 (111)) ◽  
pp. 25-31
Author(s):  
Valentyn Glyva ◽  
Volodymyr Bakharev ◽  
Natalia Kasatkina ◽  
Oleg Levchenko ◽  
Larysa Levchenko ◽  
...  

This paper reports the principles of design and the examined protective properties of liquid materials for shielding the electric, magnetic, and electromagnetic fields over a wide frequency range. The materials were made on the basis of iron ore concentrate and a pigment additive, with water-dispersed and geopolymer paints used as a matrix. The tests of protective properties for the electrical and magnetic components of the electromagnetic field of industrial frequency showed that the electric field shielding coefficients at a concentration of the screening substance of 15−60 % (by weight) equaled 1.1−8.6; magnetic field – 1.2−5.3. The shielding coefficients of the material based on a water-dispersed paint are lower than those of a geopolymer one, which can be explained by the oxidation of an iron-containing component and a decrease in electrical conductivity. The shielding coefficients of the electromagnetic field with a frequency of 2.45 GHz are 1.2−7.9. The highest coefficients are inherent in the material with filler made of iron ore concentrate and titanium-containing pigment powder in a ratio of 1:1. To design materials with the required (predictable) protective properties, the relative magnetic, dielectric permeability of materials was calculated. It is shown that the obtained data are acceptably the same as the results from direct measurements of magnetic and dielectric permeability and could be used to calculate the wave resistance of the material and the predicted reflection coefficient of electromagnetic waves. Thus, there is reason to assert the need to build a database on the frequency dependence of effective magnetic and dielectric permeability in order to automate the design processes of composite materials with predefined protective properties.


Sign in / Sign up

Export Citation Format

Share Document