Experimental and numerical study on the mechanical response of Nomex honeycomb core under transverse loading

2015 ◽  
Vol 121 ◽  
pp. 304-314 ◽  
Author(s):  
Longquan Liu ◽  
Hai Wang ◽  
Zhongwei Guan
Keyword(s):  
Mechanical Response ◽  
Numerical Study ◽  
Honeycomb Core ◽  
Transverse Loading ◽  
Nomex Honeycomb

Numerical Analysis and Mechanical Properties of Nomex™ Honeycomb Core

2017 ◽  
Author(s):  
Yue Liu ◽  
Weicheng Gao ◽  
Wei Liu ◽  
Zhou Hua
Keyword(s):  
Compressive Strength ◽  
Cell Walls ◽  
Mechanical Response ◽  
Compressive Loading ◽  
Fe Model ◽  
Honeycomb Core ◽  
Practical Applications ◽  
Honeycomb Sandwich ◽  
Nomex Honeycomb ◽  
Strength And Stiffness

This paper presents an investigation on the mechanical response of the Nomex honeycomb core subjected to flatwise compressive loading. Thin plate elastic in-plane compressive buckling theory is used to analyze the Nomex honeycomb core cell wall. A mesoscopic finite element (FE) model of honeycomb sandwich structure with the Nomex honeycomb cell walls is established by employing ABAQUS/Explicit shell elements. The compressive strength and compressive stiffness of Nomex honeycomb core with different heights and thickness of cell walls, i.e. double cell walls and single cell walls, are analyzed numerically using the FE model. Flatwise compressive tests are also carried out on bare honeycomb cores to validate the numerical method. The results suggest that the compressive strength and compression stiffness are related to the geometric dimensions of the honeycomb core. The Nomex honeycomb core with a height of 6 mm has a higher strength than that of 8 mm. In addition, the honeycomb core with lower height possesses stronger anti-instability ability, including the compressive strength and stiffness. The proposed mesoscopic model can effectively simulate the crushing process of Nomex honeycomb core and accurately predict the strength and stiffness of honeycomb sandwich panels. Our work is instructive to the practical applications in engineering.

scholarly journals Evolution of Meniscal Biomechanical Properties with Growth: An Experimental and Numerical Study

2021 ◽  
Vol 8 (5) ◽  
pp. 70
Author(s):  
Marco Ferroni ◽  
Beatrice Belgio ◽  
Giuseppe M. Peretti ◽  
Alessia Di Giancamillo ◽  
Federica Boschetti
Keyword(s):  
Mechanical Properties ◽  
Stress Relaxation ◽  
Developmental Stage ◽  
Mechanical Response ◽  
Numerical Study ◽  
Numerical Models ◽  
Mechanical Stimulus ◽  
Specific Response ◽  
Mechanical Parameters ◽  
Biochemical Analyses

The menisci of the knee are complex fibro-cartilaginous tissues that play important roles in load bearing, shock absorption, joint lubrication, and stabilization. The objective of this study was to evaluate the interaction between the different meniscal tissue components (i.e., the solid matrix constituents and the fluid phase) and the mechanical response according to the developmental stage of the tissue. Menisci derived from partially and fully developed pigs were analyzed. We carried out biochemical analyses to quantify glycosaminoglycan (GAG) and DNA content according to the developmental stage. These values were related to tissue mechanical properties that were measured in vitro by performing compression and tension tests on meniscal specimens. Both compression and tension protocols consisted of multi-ramp stress–relaxation tests comprised of increasing strains followed by stress–relaxation to equilibrium. To better understand the mechanical response to different directions of mechanical stimulus and to relate it to the tissue structural composition and development, we performed numerical simulations that implemented different constitutive models (poro-elasticity, viscoelasticity, transversal isotropy, or combinations of the above) using the commercial software COMSOL Multiphysics. The numerical models also allowed us to determine several mechanical parameters that cannot be directly measured by experimental tests. The results of our investigation showed that the meniscus is a non-linear, anisotropic, non-homogeneous material: mechanical parameters increase with strain, depend on the direction of load, and vary among regions (anterior, central, and posterior). Preliminary numerical results showed the predominant role of the different tissue components depending on the mechanical stimulus. The outcomes of biochemical analyses related to mechanical properties confirmed the findings of the numerical models, suggesting a specific response of meniscal cells to the regional mechanical stimuli in the knee joint. During maturation, the increase in compressive moduli could be explained by cell differentiation from fibroblasts to metabolically active chondrocytes, as indicated by the found increase in GAG/DNA ratio. The changes of tensile mechanical response during development could be related to collagen II accumulation during growth. This study provides new information on the changes of tissue structural components during maturation and the relationship between tissue composition and mechanical response.

Numerical Investigation of Ductile Fracture in Pipelines Under Complex Loading Using a Phenomenological Damage Model

2021 ◽  
Author(s):  
Iago S. Santos ◽  
Diego F. B. Sarzosa
Keyword(s):  
Ductile Fracture ◽  
Mechanical Response ◽  
Numerical Study ◽  
Damage Model ◽  
Stress Triaxiality ◽  
Numerical Procedure ◽  
Complex Loading ◽  
Experimental Tests ◽  
Compact Tension ◽  
Axial Tensile

Abstract This paper presents a numerical study on pipes ductile fracture mechanical response using a phenomenological computational damage model. The damage is controlled by an initiation criterion dependent on the stress triaxiality and the Lode angle parameter, and a post-initiation damage law to eliminate each finite element from the mesh. Experimental tests were carried out to calibrate the elastoplastic response, damage parameters and validate the FEM models. The tested geometries were round bars having smooth and notched cross-section, flat notched specimens under axial tensile loads, and fracture toughness tests in deeply cracked bending specimens SE(B) and compact tension samples C(T). The calibrated numerical procedure was applied to execute a parametric study in pipes with circumferential surface cracks subjected to tensile and internal pressure loads simultaneously. The effects of the variation of geometric parameters and the load applications on the pipes strain capacity were investigated. The influence of longitudinal misalignment between adjacent pipes was also investigated.

Numerical Investigation of a Stiffened Panel Subjected to Low Velocity Impacts

2015 ◽  
Vol 665 ◽  
pp. 277-280 ◽  
Author(s):  
Aniello Riccio ◽  
S. Saputo ◽  
A. Sellitto ◽  
A. Raimondo ◽  
R. Ricchiuto
Keyword(s):  
Numerical Investigation ◽  
Composite Laminates ◽  
Mechanical Response ◽  
Numerical Study ◽  
Fem Analysis ◽  
Matrix Cracking ◽  
Stiffened Panel ◽  
Low Velocity ◽  
Formation And Evolution ◽  
The Impact

The investigation of fiber-reinforced composite laminates mechanical response under impact loads can be very difficult due to simultaneous failure phenomena. Indeed, as a consequence of low velocity impacts, intra-laminar damage as fiber and matrix cracking and inter-laminar damage, such as delamination, often take place concurrently, leading to significant reductions in terms of strength and stability for composite structure. In this paper a numerical study is proposed which, by means of non-linear explicit FEM analysis, aims to completely characterize the composite reinforced laminates damage under low velocity impacts. The numerical investigation allowed to obtain an exhaustive insight on the different phases of the impact event considering the damage formation and evolution. Five different impact locations with the same impact energy are taken into account to investigate the influence on the onset and growth of damage.

An Experimental Study on a Novel Cladding System with Aluminium Honeycomb Core

2011 ◽  
Vol 261-263 ◽  
pp. 770-774
Author(s):  
Dong Ruan ◽  
Mohd Azman Yahaya ◽  
James Hicks ◽  
Jayson Lloyd ◽  
Feng Zhu
Keyword(s):  
Experimental Study ◽  
Cell Size ◽  
Mechanical Response ◽  
Sandwich Panels ◽  
Foil Thickness ◽  
Honeycomb Core ◽  
Impact Pulse ◽  
Blast Loadings

Sandwich panels consisting of two aluminium two face-sheets and a core made of aluminium honeycomb were studied in this paper. These sandwich panels are good candidates for cladding systems employed to protect other structures again blast loadings. In this paper, the mechanical response and deformation of these sandwich panels subjected to simulated blast loadings are investigated experimentally. The effects of impact pulse, foil thickness and cell size of aluminium honeycombs have been discussed.

scholarly journals Evolution of the East Antarctic Ice Sheet: A Numerical Study of Thermo-Mechanical Response Patterns With Changing Climate

1988 ◽  
Vol 11 ◽  
pp. 52-59 ◽  
Author(s):  
P. Huybrechts ◽  
J. Oerlemans
Keyword(s):  
Mechanical Response ◽  
Flow Line ◽  
Numerical Study ◽  
Ice Core ◽  
Ice Sheet ◽  
Antarctic Ice Sheet ◽  
Mechanical Coupling ◽  
Vostok Station ◽  
Basal Melting ◽  
East Antarctic Ice Sheet

An efficient numerical ice-sheet model, including time dependence and full thermo-mechanical coupling, has been developed in order to investigate the thermal regime and overall configuration of a polar ice sheet with respect to changing environmental conditions. From basic sensitivity experiments, in which a schematic East Antarctic ice sheet is forced with a typical glacial–interglacial climatic shift, it is found that: (i) the mutual interaction of temperature and deformation has a stabilizing effect on its steady-state configuration; (ii) in the transient mode, this climatic transition initially leads to increased ice thickness due to enhanced accumulation, after which this trend is reversed due to a warmer base. Time-scales for this reversal are of the order of 103 years in marginal zones and of 104 years in interior regions; (iii) horizontal heat advection plays a major role in damping possible runaway behaviour due to the dissipation – strain-rate feed-back, suggesting that creep instability is a rather unlikely candidate to initiate surging of the East Antarctic ice sheet. The model is then applied to four East Antarctic flow lines. Only the flow line passing through Wilkes Land appears to be vulnerable to widespread basal melting, due to enhanced basal warming following climatic warming. Time-dependent modelling of the Vostok flow line indicates that the Vostok Station area has risen about 95 m since the beginning of the present interglacial due to thermo-mechanical effects, which is of particular interest in interpreting the palaeoclimatic signal of the ice core obtained there.

Sign in / Sign up

Export Citation Format

Share Document