scholarly journals Contribution of China's online car-hailing services to its 2050 carbon target: Energy consumption assessment based on the GCAM-SE model

Energy Policy ◽  
2022 ◽  
Vol 160 ◽  
pp. 112714
Author(s):  
Tian Wu ◽  
Shouyang Wang ◽  
Lining Wang ◽  
Xiao Tang
2019 ◽  
Vol 111 ◽  
pp. 03022 ◽  
Author(s):  
Juha Jokisalo ◽  
Paula Sankelo ◽  
Juha Vinha ◽  
Kai Sirén ◽  
Risto Kosonen

The energy saving potential of existing buildings is significant compared to new buildings in the EU region. To reduce significantly the CO2 emissions of buildings, energy efficiency of old buildings need to be improved. Aim of this study is to determine cost-optimal solutions for energy renovation and renewable energy production systems for an old existing service building. The example building of this study is a residence for elderly people, which was built in 1955 and located in Finland. This study was carried out by a dynamic building simulation tool IDA-ICE and multi objective optimization tool MOBO. The cost-optimal renovation concepts were determined from over 2.6 billion renovation measure combinations to minimize both target energy consumption and life-cycle costs over 20 years. The results show that air-to-water heat pump is more cost effective heating system for the studied building than district heating from the building owner point of view. Improving thermal insulation level of the external walls from the original level is not the most cost-effective option to improve the energy efficiency of the building. Instead of that, for example, installation of PV and solar thermal systems are recommended in all the cost-optimal solutions regardless of the target energy consumption level.


2021 ◽  
Vol 16 (1) ◽  
pp. 163-178
Author(s):  
Aboelyazied Kulaib ◽  
Abdulrahim Kalendar ◽  
Shafqat Hussain ◽  
Yousuf Alhendal

ABSTRACT In Kuwait air-conditioning systems consume approximately 70% of the grid energy during the long summer months. In this paper, various practical approaches are investigated to enhance the energy efficiency and decrease the energy consumption of five existing air-conditioned (AC) buildings in Kuwait City. The process of energy management in air-conditioned buildings in Kuwait is overwhelming due to high energy consumption in the building sector. This study proposed an optimization technique for the proper energy management of installed AC systems to target energy-efficient buildings. In this study the aim is to explore the effect of different operating parameters, both theoretically and experimentally, and to contribute to the reduction of AC energy consumption. Consequently, the relationship between the thermal load in the air-conditioned buildings and the actual electrical energy consumption is determined, and remedial measures, along with different recommendations for energy saving, are presented. The actual thermal loads of each selected building were calculated and compared with the installed cooling capacity of the AC systems. From the results obtained it was concluded that, by implementing the suggested remedial measures, the predicted load in the selected buildings could be decreased significantly from the existing installed capacity of the cooling systems. Most of the remedial measures suggested for energy management lead to a reduction in power consumption and increased energy efficiency at different levels based on the specifications of the buildings considered and the AC systems installed, resulting in improved in economy, a reduced carbon footprint, and a cleaner environment.


Author(s):  
Shahzeen Z. Attari ◽  
Michael L. DeKay ◽  
Cliff I. Davidson ◽  
Wandi Bruine de Bruin

ICCTP 2009 ◽  
2009 ◽  
Author(s):  
Shunquan Huang ◽  
Siqin Yu ◽  
Zhongmin Liu

2020 ◽  
Vol 39 (4) ◽  
pp. 5449-5458
Author(s):  
A. Arokiaraj Jovith ◽  
S.V. Kasmir Raja ◽  
A. Razia Sulthana

Interference in Wireless Sensor Network (WSN) predominantly affects the performance of the WSN. Energy consumption in WSN is one of the greatest concerns in the current generation. This work presents an approach for interference measurement and interference mitigation in point to point network. The nodes are distributed in the network and interference is measured by grouping the nodes in the region of a specific diameter. Hence this approach is scalable and isextended to large scale WSN. Interference is measured in two stages. In the first stage, interference is overcome by allocating time slots to the node stations in Time Division Multiple Access (TDMA) fashion. The node area is split into larger regions and smaller regions. The time slots are allocated to smaller regions in TDMA fashion. A TDMA based time slot allocation algorithm is proposed in this paper to enable reuse of timeslots with minimal interference between smaller regions. In the second stage, the network density and control parameter is introduced to reduce interference in a minor level within smaller node regions. The algorithm issimulated and the system is tested with varying control parameter. The node-level interference and the energy dissipation at nodes are captured by varying the node density of the network. The results indicate that the proposed approach measures the interference and mitigates with minimal energy consumption at nodes and with less overhead transmission.


2019 ◽  
pp. 53-65
Author(s):  
Renata Domingos ◽  
Emeli Guarda ◽  
Elaise Gabriel ◽  
João Sanches

In the last decades, many studies have shown ample evidence that the existence of trees and vegetation around buildings can contribute to reduce the demand for energy by cooling and heating. The use of green areas in the urban environment as an effective strategy in reducing the cooling load of buildings has attracted much attention, though there is a lack of quantitative actions to apply the general idea to a specific building or location. Due to the large-scale construction of high buildings, large amounts of solar radiation are reflected and stored in the canyons of the streets. This causes higher air temperature and surface temperature in city areas compared to the rural environment and, consequently, deteriorates the urban heat island effect. The constant high temperatures lead to more air conditioning demand time, which results in a significant increase in building energy consumption. In general, the shade of the trees reduces the building energy demand for air conditioning, reducing solar radiation on the walls and roofs. The increase of urban green spaces has been extensively accepted as effective in mitigating the effects of heat island and reducing energy use in buildings. However, by influencing temperatures, especially extreme, it is likely that trees also affect human health, an important economic variable of interest. Since human behavior has a major influence on maintaining environmental quality, today's urban problems such as air and water pollution, floods, excessive noise, cause serious damage to the physical and mental health of the population. By minimizing these problems, vegetation (especially trees) is generally known to provide a range of ecosystem services such as rainwater reduction, air pollution mitigation, noise reduction, etc. This study focuses on the functions of temperature regulation, improvement of external thermal comfort and cooling energy reduction, so it aims to evaluate the influence of trees on the energy consumption of a house in the mid-western Brazil, located at latitude 15 ° S, in the center of South America. The methodology adopted was computer simulation, analyzing two scenarios that deal with issues such as the influence of vegetation and tree shade on the energy consumption of a building. In this way, the methodological procedures were divided into three stages: climatic contextualization of the study region; definition of a basic dwelling, of the thermophysical properties; computational simulation for quantification of energy consumption for the four facade orientations. The results show that the façades orientated to north, east and south, without the insertion of arboreal shading, obtained higher values of annual energy consumption. With the adoption of shading, the facades obtained a consumption reduction of around 7,4%. It is concluded that shading vegetation can bring significant climatic contribution to the interior of built environments and, consequently, reduction in energy consumption, promoting improvements in the thermal comfort conditions of users.


2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.


Sign in / Sign up

Export Citation Format

Share Document