The analysis of the cost-revenue production cycle efficiency of the Italian airports: A NSBM DEA approach

2018 ◽  
Vol 72 ◽  
pp. 77-85 ◽  
Author(s):  
Corrado lo Storto
2020 ◽  
Vol 142 (12) ◽  
Author(s):  
Dacheng Shang ◽  
Peng Pei ◽  
Yujun Zuo

Abstract It is anticipated that utilizing the underground space in abandoned mines to build and operate pumped-storage hydroelectricity (PSH) plants can reduce capital investment and geological constraints. However, there are currently few detailed investigations into techno-economic feasibility except for conceptual studies. In this paper, an underground coal mine in Guizhou, China was used as a reference, and the PSH layout was designed; in addition, the head loss, plant efficiency, and major cost components were investigated. The calculation results show that the capital investment of mine-based PSH was 33–50% less than that of conventional PSH. Sensitivity analysis found a clear influence of coal seam inclination on the performance of the mine-based PSH. Under the assumed conditions, the plant cycle efficiency increased from 62.7% to 71.5% when the coal seam dip varied from 5 deg to 25 deg. Depending on different price scenarios, when the coal seam inclination was steep enough, the cost of energy storage of a mine-based PSH plant was competitive compared with conventional PSH, and the plant could even become profitable. The influence of the dip of coal seam was more pronounced when in the lower range (5–15 deg) than the higher range (15–25 deg).


Author(s):  
R. H. Burdett ◽  
D. W. Thomas

The practical value of cycle efficiency is influenced by the extent of the capital investment necessary to achieve that efficiency and also by the quality, and hence the cost, of the fuel necessary for the successful attainment of the operating parameters necessary to the given efficiency level. This paper shows how such considerations have led to proposals for combined gas/steam cycles. The gas turbine in electricity supply has been severely limited in its extent of application because of the considerable problems and implied limitations of cheap fuels. In the future the coolant of gas-cooled nuclear reactors could offer greatly widened scope for the application of gas turbine technology. This paper explores the prospects in the context of the developments which may be expected in advanced gas-cooled reactor technology as it is evolving in Great Britain.


2012 ◽  
Vol 472-475 ◽  
pp. 2179-2182
Author(s):  
Wei Yan ◽  
Jing Shuai Liu ◽  
Hou Jun Lu

As to the problem that the assembly cycle and costs of quayside container crane always exceeds 40% of the entire production cycle and costs, improving the assembly efficiency becomes an important link to enhance the competence of port machinery manufacturing enterprises. In the product assembling cycle, virtual assembly can help to improve assembly quality and reduce the cost. Based on the physical structure of 45t quayside container crane, 3D components model were developed, the assembly hierarchy and modeling process were provided. The simulation analysis of assembly sequence was taken based on the CATIA DMU platform and virtual assembly animation was generated. The assembly interference detection results were analyzed to verify the part assembling ability, the whole disassembly and assembly process was displayed, which can help the assembly workers making visual analysis of fitting operation rationality.


2015 ◽  
Author(s):  
L. Morais ◽  
R. Massa ◽  
E. Tavares ◽  
E. Andrade

Globalization and advanced manufacturing technologies have forced manufacturing firms to increase productivity while reducing costs. At the same time, customers are increasingly demanding better products considering tangi- ble (e.g., smell, color, taste) and intangible (e.g., mark, fair treading, and envi- ronmental responsability) attributes. Currently, Brazil consolidates a position as the largest producer and exporter of coffee, accounting for 30% of the inter- national coffee market. This paper presents a stochastic model for performance evaluation and planning of coffee manufacturing process aiming at reducing the cost and time of the production cycle. An industrial case study shows the practical usability of the proposed models and techniques.


Author(s):  
Julia Haltiwanger Nicodemus ◽  
Morgan McGuinness ◽  
Rijan Maharjan

We present a thermodynamic and cost analysis of synthesis gas (syngas) production by the Zn/ZnO solar thermochemical fuel production cycle. A mass, energy and entropy balance over each step of the Zn/ZnO syngas production cycle is presented. The production of CO and H2 is considered simultaneously across the range of possible stoichiometric combinations and the effects of irreversibilities due to both recombination in the quenching process following dissociation of ZnO and incomplete conversion in the fuel production step are explored. In the cost analysis, continuous functions for each cost component are presented, allowing estimated costs of syngas fuel produced at plants between 50 and 500MWth. For a solar concentration ratio of 10000, a dissociation temperature of 2300K, and a CO fraction in the syngas of 1/3, the maximum cycle efficiency is 39% for an ideal case in which there is no recombination in the quencher, complete conversion in the oxidizer, and maximum heat recovery. In a 100MWth plant, the cost to produce syngas would be $0.025/MJ for this ideal case. The effect of heat recuperation, recombination in the quencher, and incomplete conversion on efficiency and cost are explored. The effect of plant size and feedstock costs on the cost of solar syngas are also explored. The results underscore the importance improving quencher and oxidizer processes to reduce costs. However, even assuming the ideal case, the predicted cost of solar syngas is 5.5 times more expensive than natural gas on an energy basis. The process will therefore require incentive policies that support early implementation in order to become economically competitive.


2013 ◽  
Vol 772 ◽  
pp. 68-71
Author(s):  
Shen Rui Wu ◽  
Fu Min Xu ◽  
Jia Yan Li ◽  
Yi Tan ◽  
Ya Qiong Li

Solar grade silicon (SoG-Si) is the basic material of photovoltaic industry. Metallurgical method as a way of purification isconsidered to reduce the cost of polysilicon production unanimously based on its low cost, short production cycle, relatively simple process, lowpollution and controllable scale size, and it has become a hot topic in the subject research around the world.In this paper Al-Si-Sn alloy is used to purifypolysiliconand influence on the purification efficiency of polysilicon with different compositions of Al-Si-Sn alloy is analyzed. In order to study the segregation of impurity B in purification process, we introduce final segregation coefficient kB,finaland analyze the relation between kB,finaland the content of Al,Snin Al-Si-Sn alloy thermodynamically.


2013 ◽  
Vol 483 ◽  
pp. 538-541
Author(s):  
Yi Li Lin ◽  
Jian Feng Lu

According to the complexity of the assembly line for the large complex products, a new production pattern with fixed objects for the mixed model assembly line is proposed. Improved GA is used to solve the scheduling problem .In this paper, a production scheduling system is developed. It can speed up the production cycle, lower the cost, improve the productivity and so on.


Author(s):  
D.G. Churilov ◽  
S.D. Polischuk ◽  
Y.A. Stekolnikov ◽  
I.S. Arapov ◽  
A.V. Shemyakin

Организацияремонтного производства на основе оптимального использования передовых технологических процессов позволит восстанавливать и упрочнять рабочие органы сельскохозяйственных машин с учетом минимума затрат как на процессы восстановления, так и на функционирование предприятия в целом.При ремонте существуют несколько вариантов: заменить изношенныедетали на новые или произвести восстановление изношенных с доведением и улучшением их физико-механических свойств.Восстановление более предпочтительно. Оно позволяет сокращать время простоя неисправных машин и оборудования, повышать показатели надежности использования машин.Экономика работ по восстановлению заключается в снижении себестоимостиремонтакак агрегатов,так и машин. При этом необходимо восстановить геометрические показатели деталей.Анализ статистики показал,что годных для восстановления деталей до 50 и только до 9 не подлежат восстановлению.По сравнению с изготовлением новых запасных частей количество операций обработки сокращается в 3-8 раз.Важное преимущество восстановления малая металлоемкость. В процессах восстановления требуется на 50-75 меньше металла,чемдля изготовленияновых.Восстановление деталей к импортным машинам можно рассматривать как альтернативу дорогим оригинальным запчастям.При этом должна быть налажена регламентная систематехобслуживания и ремонтасельскохозяйственных машин по фактическому техническомусостоянию. Качестворемонта зависит оторганизации всех звеньев производственногоцикла, воснове которого лежиткомплексмероприятий техническогохарактера.The organization of repair production based on the optimal use of advanced technological processes will make it possible to restore and strengthen the working bodies of agricultural machines, taking into account the minimum costs of both the restoration processes and the functioning of the enterprise as a whole. During repair, there are several options: to replace worn parts with new ones or to restore worn parts with improvement in their physical and mechanical properties. Recovery is more preferable. It makes possible to reduce the downtime of faulty machines and equipment and to increase their reliability. The economics of restoration work is to reduce the cost of repairs of both units and machines. For this, it is necessary to restore the geometric parameters of the parts. The results of statistics showed that up to 50 of parts were suitable for recovery and only up to 9 cannot be restored.Compared with the manufacture of new spare parts, the number of machining operations is reduced by 3-8 times. An important advantage of recovery is low metal consumption. In the recovery processes, 50-75 less metal is required than for manufacturing the new ones. The restoration of parts for imported machines can be considered as an alternative to expensive original spare parts. At the same time, a regulatory system for maintenance and repair of agricultural machines according to the actual technical condition should be established. The quality of repairs depends on the organization of all parts of the production cycle, which is based on a set of technical measures.


Author(s):  
S. A. Smirnov ◽  
N. A. Gorshkova

The classical approach to the design of hydraulic drives includes complex calculations and real tests, which is a resource-consuming process. Reduce the cost of design allows the introduction of the development of simulation modeling and CAD / CAM / CAE / PDM automation complexes of the production cycle of enterprises. Modeling allows us to use systematic basis methodological achievements of the theory and practice of hydroautomatics for the design of hydraulic devices to accumulate in the orderly form design experience and provide model support for the life cycle of these products. The article deals with the modern approach to the design of hydraulic drives. A type of a preliminary evaluation of hydraulic drive characteris-tics is given in the example of a hydrodrive of a lifting and mast device. The principle and design schemes of the hydraulic drive are chosen, and a mathematical model is compiled on the basis of the requirements for hoisting and mast devices. A simulation model of the drive is developed on the basis of the mathematical model, consisting of several separate parts connected together. Parts represent a mixed structure of blocks that describe processes in mechanical and hydraulic systems. For visual display an animated 3D model has been created that allows you to observe the progress and results of the simulation. During the calculations, the position dependence graphs of the each link of the lifting and mast device on time, as well as pressure and flow on the safety valve were obtained. Conclusion, based on the results of modeling, was made about the adequacy of the application of models for estimating the characteristics of the projected hydraulic drive in the first approximation. It is recommended to develop such models at the stages of outline and technical design.


2021 ◽  
Author(s):  
Reza Lotfi ◽  
Bahareh Kargar ◽  
Alireza Gharehbaghi ◽  
Gerhard-Wilhelm Weber

Abstract Medical Waste Management (MWM) is an important and necessary problem in the COVID-19 situation for treatment staff. When the number of infectious patients grows up and amount of MWMs increases day by day. We present Medical Waste Chain Network Design (MWMCND) that contains Health Center (HC), Waste Segregation (WS), Waste Purchase Contractor (WPC) and landfill. We propose to locate WS to decrease waste and recover them and send them to the WPC. Recovering medical waste like metal and plastic can help the environment and return to the production cycle. Therefore, we proposed a novel Viable MWCND by a novel two-stage robust stochastic programming that considers resiliency (flexibility and network complexity) and sustainable (energy and environment) requirements. Therefore, we try to consider risks by Conditional Value at Risk (CVaR) and improve robustness and agility to demand fluctuation and network. We utilize and solve it by GAMS CPLEX solver. The results show that by increasing the conservative coefficient, the confidence level of CVaR and waste recovery coefficient increases cost function and population risk. Moreover, increasing demand and scale of the problem make to increase the cost function.


Sign in / Sign up

Export Citation Format

Share Document