Production of lightweight mortar using recycled waste papers and pulverized ceramics: Mechanical and microscale properties

2021 ◽  
Vol 39 ◽  
pp. 102233
Author(s):  
Paul O. Awoyera ◽  
Oladimeji B. Olalusi ◽  
David P. Babagbale
Keyword(s):  
Recycled Waste ◽  
Lightweight Mortar

A Comprehensive Review on Blast Furnace

2018 ◽  
Vol 4 (11) ◽  
pp. 6
Author(s):  
Upendra Kumar ◽  
Avinash Patidar ◽  
Bhupendra Koshti
Keyword(s):  
Blast Furnace ◽  
Metallurgical Coke ◽  
Waste Plastics ◽  
Blast Furnaces ◽  
Liquid Hydrocarbons ◽  
Comprehensive Review ◽  
Global Performance ◽  
Flow Heat ◽  
And Control ◽  
Recycled Waste

The design and control of blast furnace (BF) ironmaking must be optimized in order to be competitive and sustainable, particularly under the more and more demanding and tough economic and environmental conditions. To achieve this, it is necessary to understand the complex multiphase flow, heat and mass transfer, and global performance of a BF. In this paper injection of alternative reducing agents via lances in the tubers of blast furnaces is discussed to reduce the consumption of metallurgical coke. Besides liquid hydrocarbons and pulverized coal the injection of recycled waste plastics is possible, offering the opportunity to chemically reuse waste material and also utilize the energy contained in such remnants.

scholarly journals Bioremediation of polluted soil due to tsunami by using recycled waste glass

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
M. Azizul Moqsud
Keyword(s):  
Heavy Metals ◽  
Electrical Conductivity ◽  
Laboratory Experiments ◽  
Saline Soil ◽  
Salt Content ◽  
Tohoku Earthquake ◽  
Polluted Soil ◽  
Waste Glass ◽  
Excess Cost ◽  
Recycled Waste

AbstractIn this research, bioremediation of tsunami-affected polluted soil has been conducted by using collective microorganisms and recycled waste glass. The Tohoku earthquake, which was a mega earthquake in Japan triggered a huge tsunami on March 11th, 2011 that caused immeasurable damage to the geo-environmental conditions by polluting the soil with heavy metals and excessive salt content. Traditional methods to clean this polluted soil was not possible due to the excess cost and efforts. Laboratory experiments were conducted to examine the capability of bioremediation of saline soil by using recycled waste glass. Different collective microorganisms which were incubated inside the laboratory were used. The electrical conductivity (EC) was measured at different specified depths. It was noticed that the electrical conductivity decreased with the assist of the microbial metabolisms significantly. Collective microorganisms (CM2) were the highly capable to reduce salinity (up to 75%) while using recycled waste glass as their habitat.

scholarly journals Sustainable Panels Made with Industrial and Agricultural Waste: Thermal and Environmental Critical Analysis of the Experimental Results

2021 ◽  
Vol 11 (2) ◽  
pp. 494
Author(s):  
Paola Ricciardi ◽  
Elisa Belloni ◽  
Francesca Merli ◽  
Cinzia Buratti
Keyword(s):  
Thermal Conductivity ◽  
Life Cycle ◽  
Rice Husk ◽  
Agricultural Waste ◽  
Embodied Energy ◽  
Waste Materials ◽  
Impact Reduction ◽  
Combined Solution ◽  
Order Of Magnitude ◽  
Recycled Waste

Recycled waste materials obtained from industrial and agricultural processes are becoming promising thermal and acoustic insulating solutions in building applications; their use can play an important role in the environmental impact reduction. The aim of the present paper is the evaluation of the thermal performance of recycled waste panels consisting of cork scraps, rice husk, coffee chaff, and end-life granulated tires, glued in different weight ratios and pressed. Six panels obtained from the mixing of these waste materials were fabricated and analyzed. In particular, the scope is the selection of the best compromise solutions from the thermal and environmental points of view. To this aim, thermal resistances were measured in laboratory and a Life Cycle Assessment (LCA) analysis was carried out for each panel; a cross-comparative examination was performed in order to optimize their properties and find the best panels solutions to be assembled in the future. Life Cycle Analysis was carried out in terms of primary Embodied Energy and Greenhouse Gas Emissions, considering a ‘‘cradle-to-gate” approach. The obtained thermal conductivities varied in the 0.055 to 0.135 W/mK range, in the same order of magnitude of many traditional systems. The best thermal results were obtained for the panels made of granulated cork, rice husk, and coffee chaff in this order. The rubber granulate showed higher values of the thermal conductivity (about 0.15 W/mK); a very interesting combined solution was the panel composed of cork (60%), rice husk (20%), and coffee chaff (20%), with a thermal conductivity of 0.08 W/mK and a Global Warming Potential of only 2.6 kg CO2eq/m2. Considering the Embodied Energy (CED), the best solution is a panel composed of 56% of cork and 44% of coffee chaff (minimum CED and thermal conductivity).

Utilization of bioethanol industry recycled waste for sustainable soil improvement: A win-win application

2021 ◽  
pp. 106192
Author(s):  
Yaowu Liu ◽  
Chengjun Cao ◽  
Qing Wang ◽  
Wenle Zheng ◽  
Jiejie Shen ◽  
...  
Keyword(s):  
Soil Improvement ◽  
Recycled Waste

Using Recycled Waste Material from UAE in Concrete

2020 ◽  
Author(s):  
Muhammad Faiz Ahmed ◽  
Sheikh Hamza Rizwan ◽  
Muhammad Haseeb Ahmed ◽  
Mustafa Batikha
Keyword(s):  
Waste Material ◽  
Recycled Waste

scholarly journals The use of recycled waste products in a sustainable house design - a case study

2018 ◽  
Vol 196 ◽  
pp. 04051
Author(s):  
Agnes Iringová
Keyword(s):  
Physical Parameters ◽  
Renewable Materials ◽  
Recycled Materials ◽  
Waste Products ◽  
Current State ◽  
Waste Production ◽  
House Design ◽  
Family House ◽  
Recycled Waste

The current state of waste production and management in Slovakia. Legislative regulations. Analysis of applying recycled waste products in the construction of sustainable buildings as a substitution of non-renewable materials. The comparison of the physical parameters of recycled materials with non-renewable materials in terms of thermal and fire protection. The construction solution of lightweight building envelopes with a timber supporting system using the thermal insulation and facing made of recycled materials. The model solution of a wood-based family house using recycled waste materials. The comparison of the environmental burden of a standard lightweight sandwich peripheral wall with a recycled waste wall.

Evaluation Indexes System for Assessing Road Construction with Recycled Waste Materials to Achieve Better Environmental Impacts

2011 ◽  
Vol 250-253 ◽  
pp. 1001-1006 ◽  
Author(s):  
De Zhen Chen ◽  
Cui Jie Geng ◽  
Wen Zhou Sun
Keyword(s):  
Energy Consumption ◽  
Environmental Impact ◽  
Waste Disposal ◽  
Large Scale ◽  
Construction Material ◽  
Bottom Ash ◽  
Road Construction ◽  
Waste Materials ◽  
Evaluation Indexes ◽  
Recycled Waste

Evaluation indexes system has been put forward in this paper for quantifying thesystematical energy consumption, resources consumption, total emissions’ change and waste disposal capacity in road construction with recycled waste materials involved. With help of this evaluation indexes system, the contributions to environmental improvement caused by recycling waste materials in road construction can be quantified through calculating savings on environmental impact potentials, savings on energy consumption, on virgin materials’ consumption and waste disposal capacity provided by road construction. Based on the construction project of a road section numbered No.20 EWK0+400 ~ EWK0+600 of North highway to Shanghai Pudong international airport, which was the first trial project of using several kinds of recycled waste materials including bottom ash from incinerators to replace commonly used materials such as gravel in large scale in road pavement, the results of the four indexes, namely, savings on energy consumption and virgin materials’ consumption, environmental impact potentials as well as waste disposal capacity were obtained. It was found out that with multi recycled waste materials replacing part of the common construction material, systematical energy consumption can be reduced by 30%, a large amount of virgin resource consumption can be avoid and road construction also provides a remarkable large “dumping site” for solid wastes; while at the same time environmental impact potentials were saved for most impact categories except for increase in Ecotoxicity, water chronic, which was caused by heavy metals’ leaching and can be prevented by pre-treatment. Those results are useful for guiding the utilization of recycled waste materials, as well as for developing new technology process and advanced materials in road construction.

scholarly journals Engineering Properties of Concrete with Waste Recycled Plastic: A Review

2018 ◽  
Vol 10 (11) ◽  
pp. 3875 ◽  
Author(s):  
Adewumi Babafemi ◽  
Branko Šavija ◽  
Suvash Paul ◽  
Vivi Anggraini
Keyword(s):  
Surface Shape ◽  
Engineering Properties ◽  
Plastic Properties ◽  
Waste Plastic ◽  
Durability Properties ◽  
Composite Product ◽  
Pre Treatment ◽  
Recycled Waste ◽  
Moisture Resistant

The abundance of waste plastic is a major issue for the sustainability of the environment as plastic pollutes rivers, land, and oceans. However, the versatile behavior of plastic (it is lightweight, flexible, strong, moisture-resistant, and cheap) can make it a replacement for or alternative to many existing composite materials like concrete. Over the past few decades, many researchers have used waste plastic as a replacement for aggregates in concrete. This paper presents a comprehensive review of the engineering properties of waste recycled plastic. It is divided into three sections, along with an introduction and conclusion. The influence of recycled waste plastics on the fresh properties of concrete is discussed first, followed by its influence on the mechanical and durability properties of concrete. Current experimental results have shown that the mechanical and durability properties of concrete are altered due to the inclusion of plastic. However, such concrete still fulfills the requirements of many engineering applications. This review also advocates further study of possible pre-treatment of waste plastic properties for the modification of its surface, shape, and size in order to improve the quality of the composite product and make its use more widespread.

Sign in / Sign up

Export Citation Format

Share Document