Photocatalytic reductive applications of C-doped ZrO2/PANI composite towards Cr(VI)

2021 ◽  
pp. 113737
Author(s):  
Tarisai Velempini ◽  
Eswaran Prabakaran ◽  
Kriveshini Pillay
Keyword(s):  
Pani Composite

scholarly journals Design an Epoxy Coating with TiO2/GO/PANI Nanocomposites for Enhancing Corrosion Resistance of Q235 Carbon Steel

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2629
Author(s):  
Shimin Chen ◽  
Bo Li ◽  
Rengui Xiao ◽  
Huanhu Luo ◽  
Siwu Yu ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Photocurrent Density ◽  
Photoelectrochemical Performance ◽  
Q235 Steel ◽  
Protective Barrier ◽  
Barrier Coating ◽  
Pani Composite ◽  
Steel Protection ◽  
Q235 Carbon Steel

In this work, a ternary TiO2/Graphene oxide/Polyaniline (TiO2/GO/PANI) nanocomposite was synthesized by in situ oxidation and use as a filler on epoxy resin (TiO2/GO/PANI/EP), a bifunctional in situ protective coating has been developed and reinforced the Q235 carbon steel protection against corrosion. The structure and optical properties of the obtained composites are characterized by XRD, FTIR, and UV–vis. Compared to bare TiO2 and bare Q235, the TiO2/GO/PANI/EP coating exhibited prominent photoelectrochemical properties, such as the photocurrent density increased 0.06 A/cm2 and the corrosion potential shifted from −651 mV to −851 mV, respectively. The results show that the TiO2/GO/PANI nanocomposite has an extended light absorption range and the effective separation of electron-hole pairs improves the photoelectrochemical performance, and also provides cathodic protection to Q235 steel under dark conditions. The TiO2/GO/PANI/EP coating can isolate the Q235 steel from the external corrosive environment, and may generally be regarded a useful protective barrier coating to metallic materials. When the TiO2/GO/PANI composite is dispersed in the EP, the compactness of the coating is improved and the protective barrier effect is enhanced.

scholarly journals Cellulose Derived Graphene/Polyaniline Nanocomposite Anode for Energy Generation and Bioremediation of Toxic Metals via Benthic Microbial Fuel Cells

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 135
Author(s):  
Asim Ali Yaqoob ◽  
Mohamad Nasir Mohamad Ibrahim ◽  
Khalid Umar ◽  
Showkat Ahmad Bhawani ◽  
Anish Khan ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Current Density ◽  
Toxic Metals ◽  
Microbial Fuel Cells ◽  
Organic Substrate ◽  
Synthetic Wastewater ◽  
Multiple Parameters ◽  
Pani Composite ◽  
Industrial Level ◽  
Modified Graphene

Benthic microbial fuel cells (BMFCs) are considered to be one of the eco-friendly bioelectrochemical cell approaches nowadays. The utilization of waste materials in BMFCs is to generate energy and concurrently bioremediate the toxic metals from synthetic wastewater, which is an ideal approach. The use of novel electrode material and natural organic waste material as substrates can minimize the present challenges of the BMFCs. The present study is focused on cellulosic derived graphene-polyaniline (GO-PANI) composite anode fabrication in order to improve the electron transfer rate. Several electrochemical and physicochemical techniques are used to characterize the performance of anodes in BMFCs. The maximum current density during polarization behavior was found to be 87.71 mA/m2 in the presence of the GO-PANI anode with sweet potato as an organic substrate in BMFCs, while the GO-PANI offered 15.13 mA/m2 current density under the close circuit conditions in the presence of 1000 Ω external resistance. The modified graphene anode showed four times higher performance than the unmodified anode. Similarly, the remediation efficiency of GO-PANI was 65.51% for Cd (II) and 60.33% for Pb (II), which is also higher than the unmodified graphene anode. Furthermore, multiple parameters (pH, temperature, organic substrate) were optimized to validate the efficiency of the fabricated anode in different environmental atmospheres via BMFCs. In order to ensure the practice of BMFCs at industrial level, some present challenges and future perspectives are also considered briefly.

scholarly journals Effect of CSA Concentration on the Ammonia Sensing Properties of CSA-Doped PA6/PANI Composite Nanofibers

Sensors ◽  
2014 ◽  
Vol 14 (11) ◽  
pp. 21453-21465 ◽  
Author(s):  
Zengyuan Pang ◽  
Jiapeng Fu ◽  
Pengfei Lv ◽  
Fenglin Huang ◽  
Qufu Wei
Keyword(s):  
Composite Nanofibers ◽  
Sensing Properties ◽  
Ammonia Sensing ◽  
Pani Composite

Effect of Temperature on the Electrical and Gas Sensing Properties of Polyaniline and Multiwall Carbon Nanotube Doped Polyaniline Composite Thin Films

2011 ◽  
Vol 254 ◽  
pp. 167-170 ◽  
Author(s):  
Subodh Srivastava ◽  
Sumit Kumar ◽  
Vipin Kumar Jain ◽  
Y.K. Vijay
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Gas Sensing ◽  
Hydrogen Gas ◽  
Composite Thin Film ◽  
Effect Of Temperature ◽  
Multiwall Carbon Nanotube ◽  
Film Sensor ◽  
Composite Thin Films ◽  
Pani Composite

In the present work we have reported the effect of temperature on the gas sensing properties of pure Polyaniline (PANI) and Multiwall carbon nanotube (MWNT) doped PANI composite thin film based chemiresistor type gas sensors for hydrogen gas sensing application. PANI and MWNT doped PANI composite were synthesized by in situ chemical oxidative polymerization of aniline using ammonium persulfate in an acidic medium. The thin sensing film of chemically synthesized PANI and MWNT doped PANI composite were deposited onto finger type Cu-interdigited electrodes using spin cast technique to prepared chemiresistor type gas sensor. The electrical properties of these composite thin films were characterized by I-V measurements as function of temperature. The I-V measurement revealed that conductivity of composite thin films increased as the temperature increased. The changes in resistance of the composite thin film sensor were utilized for detection of hydrogen gas. It was observed that at room temperature, MWNT doped PANI composite sensor shows higher response value and sensitivity with good repeatability in comparison to pure PANI thin film sensor. It was also observed that both PANI and MWNT doped PANI composite thin film based sensors showed unstable behavior as the temperature increased. The surface morphology of these composite thin films has also been characterized by scanning electron microscopy (SEM) measurement.

Investigation on NiWO4/PANI Composite as Electrode Material for Energy Storage Devices

2021 ◽  
Author(s):  
S. Rajkumar ◽  
S Gowri ◽  
S Dhineshkumar ◽  
Princy Merlin Johnson ◽  
Anandaraj Sathiyan
Keyword(s):  
Energy Storage ◽  
Electrode Material ◽  
Energy Demand ◽  
Fossil Fuels ◽  
Energy Storage Materials ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Pani Composite ◽  
New Energy ◽  
Inorganic Components

With the fast exhaustion of fossil fuels, the need for new energy storage materials to meet the world's massive energy demand has inclined tremendously. Inorganic components with conducting polymer based...

scholarly journals In Situ Synthesis of Polyaniline Based Ceramic Wastes Composites: Dielectric and Electrical Properties

2021 ◽  
Author(s):  
M. Sohail ◽  
Adnan Shahzad ◽  
Mian Gul Sayed ◽  
Ihsan Ullah ◽  
M. Omer ◽  
...  
Keyword(s):  
Composite Material ◽  
High Frequency ◽  
Room Temperature ◽  
In Situ Synthesis ◽  
Face Centered Cubic ◽  
Dielectric Analysis ◽  
Photovoltaic Detectors ◽  
Pani Composite ◽  
Face Centered

Abstract In the present study, ceramic wastes collected from the premises of industrial zone in Peshawar, KP Pakistan were investigated. An effort has been made to recycle and use the ceramic wastes as fillers in polymeric composites. The negative cost ceramic wastes were purified and activated thermally. The elemental composition and pellets of the wastes were investigated through SEM/EDX analysis. Waste/Polyaniline (PANI) composite was synthesized via in-situ free radical polymerization technique. SEM of the composites showed the uniform distribution of fillers particles in the PANI matrix. XRD studies confirmed that the prepared composite material had a face- centered cubic geometry with distinct preferential orientations. Dielectric analysis showed that the materials exhibit active performance at high frequency regions (3MHz to 3GHz) at room temperature. The results show decrease in dielectric losses and capacitance (1.6 pF) at high frequency regions. AC conductivity of the composite has been increased up to 37.95 Scm-1. This revealed the effect of PANI on the ceramic wastes while increasing its conductance performance. This suggests that the composite material can be investigated for use in photovoltaic detectors, electro-responsive capacitors and power applications.

Sign in / Sign up

Export Citation Format

Share Document