Engineering carbon nanotubes enhanced hydrophobic membranes with high performance in membrane distillation by spray coating

2020 ◽  
pp. 118978
Author(s):  
Baolei Xie ◽  
Guorong Xu ◽  
Yuhui Jia ◽  
Lukai Gu ◽  
Qun Wang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
High Performance ◽  
Spray Coating ◽  
Membrane Distillation ◽  
Hydrophobic Membranes

scholarly journals Triple-Layer Nanocomposite Membrane Prepared by Electrospinning Based on Modified PES with Carbon Nanotubes for Membrane Distillation Applications

Membranes ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 15 ◽  
Author(s):  
Mohamed R. Elmarghany ◽  
Ahmed H. El-Shazly ◽  
Saeid Rajabzadeh ◽  
Mohamed S. Salem ◽  
Mahmoud A. Shouman ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Vinylidene Fluoride ◽  
Bulk Material ◽  
Total Porosity ◽  
Surface Hydrophobicity ◽  
Membrane Distillation ◽  
Nanocomposite Membrane ◽  
High Porosity ◽  
Triple Layer ◽  
Layer Membrane

In this work, a novel triple-layer nanocomposite membrane prepared with polyethersulfone (PES)/carbon nanotubes (CNTs) as the primary bulk material and poly (vinylidene fluoride-co-hexafluoro propylene) (PcH)/CNTs as the outer and inner surfaces of the membrane by using electrospinning method is introduced. Modified PES with CNTs was chosen as the bulk material of the triple-layer membrane to obtain a high porosity membrane. Both the upper and lower surfaces of the triple-layer membrane were coated with PcH/CNTs using electrospinning to get a triple-layer membrane with high total porosity and noticeable surface hydrophobicity. Combining both characteristics, next to an acceptable bulk hydrophobicity, resulted in a compelling membrane for membrane distillation (MD) applications. The prepared membrane was utilized in a direct contact MD system, and its performance was evaluated in different salt solution concentrations, feed velocities and feed solution temperatures. The results of the prepared membrane in this study were compared to those reported in previously published papers. Based on the evaluated membrane performance, the triple-layer nanocomposite membrane can be considered as a potential alternative with reasonable cost, relative to other MD membranes.

scholarly journals Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jae-Won Lee ◽  
Joon Young Cho ◽  
Mi Jeong Kim ◽  
Jung Hoon Kim ◽  
Jong Hwan Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
High Performance ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Gauge Factor ◽  
Time Interval ◽  
Single Walled Carbon ◽  
Irradiation Energy ◽  
Walled Carbon Nanotubes

AbstractSoft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm−1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

scholarly journals Concentration of Bioactive Phenolic Compounds in Olive Mill Wastewater by Direct Contact Membrane Distillation

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1808
Author(s):  
Rosa Tundis ◽  
Carmela Conidi ◽  
Monica R. Loizzo ◽  
Vincenzo Sicari ◽  
Rosa Romeo ◽  
...  
Keyword(s):  
Direct Contact ◽  
High Performance ◽  
Biological Properties ◽  
Membrane Distillation ◽  
Olive Mill Wastewater ◽  
High Concentration ◽  
Direct Contact Membrane Distillation ◽  
Reducing Activity ◽  
Β Carotene ◽  
Olive Mill

Olive mill wastewater (OMW), generated as a by-product of olive oil production, is considered one of the most polluting effluents produced by the agro-food industry, due to its high concentration of organic matter and nutrients. However, OMW is rich in several polyphenols, representing compounds with remarkable biological properties. This study aimed to analyze the chemical profile as well as the antioxidant and anti-obesity properties of concentrated fractions obtained from microfiltered OMW treated by direct contact membrane distillation (DCMD). Ultra-high performance liquid chromatography (UHPLC) analyses were applied to quantify some phenols selected as phytochemical markers. Moreover, α-Amylase, α-glucosidase, and lipase inhibitory activity were investigated together with the antioxidant activity by means of assays, namely β-carotene bleaching, 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic) acid (ABTS) diammonium salts, 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, and Ferric Reducing Activity Power (FRAP) tests. MD retentate—which has content of about five times greater of hydroxytyrosol and verbascoside and about 7 times greater of oleuropein than the feed—was more active as an antioxidant in all applied assays. Of interest is the result obtained in the DPPH test (an inhibitory concentration 50% (IC50) of 9.8 μg/mL in comparison to the feed (IC50 of 97.2 μg/mL)) and in the ABTS assay (an IC50 of 0.4 μg/mL in comparison to the feed (IC50 of 1.2 μg/mL)).

Synergistic effect of carbon nanotubes and graphitic carbon nitride on the enhanced supercapacitor performance of cobalt diselenide-based composites

2021 ◽  
Author(s):  
Mingjie Li ◽  
Xuan Zheng ◽  
Xiang Li ◽  
Youjun Yu ◽  
Jinlong Jiang
Keyword(s):  
Carbon Nanotubes ◽  
Transition Metal ◽  
Synergistic Effect ◽  
Hydrothermal Method ◽  
High Performance ◽  
Carbon Nitride ◽  
Electrode Materials ◽  
One Dimensional ◽  
Supercapacitor Performance ◽  
Metal Selenides

Recently, transition metal selenides have been investigated extensively as promising electrode materials for high-performance supercapacitors. Herein, the multi-component CoSe2/CNTs@g-C3N4 composites are prepared using a two-step hydrothermal method by incorporating one-dimensional...

High performance self-heated membrane distillation system for energy efficient desalination process

2021 ◽  
Author(s):  
Wei-Song Hung ◽  
Subrahmanya T M ◽  
Po Ting Lin ◽  
Yu-Hsuan Chiao ◽  
Januar Widakdo ◽  
...  
Keyword(s):  
Environmental Pollution ◽  
Energy Efficient ◽  
High Performance ◽  
Membrane Distillation ◽  
Energy Crisis ◽  
Safe Water ◽  
Global Challenges ◽  
Promising Strategy ◽  
Distillation System

Membrane distillation (MD) based desalination process is thought to be a promising strategy to address global challenges such as safe water-energy crisis and environmental pollution. Here, we demonstrate a novel...

Sign in / Sign up

Export Citation Format

Share Document