Dependence of electrical parameters of co/gold-chloride/p-Si diode on frequency and illumination

2021 ◽  
Vol 121 ◽  
pp. 111613
Author(s):  
E. Erdogan ◽  
M. Yilmaz ◽  
S. Aydogan ◽  
U. Incekara ◽  
Y. Sahin
Keyword(s):  
Gold Chloride ◽  
Electrical Parameters

The Influence Of The Led Luminaires Electrical Parameters On Their Correlated Colour Temperature During Operation Mode

2020 ◽  
pp. 89-96
Author(s):  
Sergei S. Kapitonov ◽  
Alexei S. Vinokurov ◽  
Sergei V. Prytkov ◽  
Sergei Yu. Grigorovich ◽  
Anastasia V. Kapitonova ◽  
...  
Keyword(s):  
Operation Mode ◽  
Light Sources ◽  
Electrical Parameters ◽  
Colour Temperature ◽  
Radiation Spectra ◽  
Service Period ◽  
Close Proximity ◽  
Definition Of ◽  
Comprehensive Study

The article describes the results of comprehensive study aiming at increase of quality of LED luminaires and definition of the nature of changes in their correlated colour temperature (CCT) in the course of operation. Dependences of CCT of LED luminaires with remote and close location of phosphor for 10 thousand hours of operation in different electric modes were obtained; the results of comparison between the initial and final radiation spectra of the luminaires are presented; using mathematical statistics methods, variation of luminaire CCT over the service period claimed by the manufacturer is forecast; the least favourable electric operation modes with the highest CCT variation observed are defined. The obtained results have confirmed availability of the problem of variation of CCT of LED luminaires during their operation. Possible way of its resolution is application of more qualitative and therefore expensive LEDs with close proximity of phosphor or LEDs with remote phosphor. The article may be interesting both for manufacturers and consumers of LED light sources and lighting devices using them.

Separation and Characterization of Standard Propoxyphene Diastereomers and Their Determination in Pharmaceutical and Illicit Preparations

1981 ◽  
Vol 64 (4) ◽  
pp. 875-883
Author(s):  
Shiv K Soni ◽  
Daniel Van Gelder
Keyword(s):  
High Pressure ◽  
Optical Isomers ◽  
Gold Chloride ◽  
Melting Points ◽  
Eutectic Melting ◽  
Racemic Mixtures ◽  
The Individual ◽  
Isomeric Mixtures ◽  
Asymmetric Carbon

Abstract Due to the existence of 2 asymmetric carbon atoms in: the propoxyphene molecule, there are 4 diastereomers: alpha dextro, alpha levo, beta dextro, and beta levo. Only α-d-propoxyphene is included under the federal Controlled Substances Act. Baseline separations of propoxyphene from various incipients (aspirin, caffeine, phenacetin, and acetaminophen) present in pharmaceutical and illicit preparations, and between the alpha and beta diastereomers, were achieved by high pressure liquid chromatography. The column eluant was collected and propoxyphene was extracted. The optical isomers were differentiated and characterized by melting points and by chemical microcrystalline tests. Using hot stage thermomicroscopy, the eutectic melting points of binary isomeric mixtures of propoxyphene bases and salts were found to be depressed about 10° and 15-30°C, respectively, below the individual isomer melting points. The characteristic microcrystals formed with the alpha racemic mixtures by using a glycerin-aqueous gold chloride reagent were not produced by the beta racemic mixtures.

scholarly journals A Microtester for Measuring the Reliability of Microdevices in Controlled Environmental Conditions

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 585
Author(s):  
Yunjia Li ◽  
Weitao Dou ◽  
Chenyuan Zhou ◽  
Xinyi Wang ◽  
Aijun Yang ◽  
...  
Keyword(s):  
Environmental Conditions ◽  
Environmental Parameters ◽  
Test System ◽  
Standard Test ◽  
Electrical Parameters ◽  
Vibration Energy Harvester ◽  
Electromagnetic Vibration ◽  
Small Footprint ◽  
Humidity Range ◽  
Decoupling Algorithm

A miniaturized reliability test system for microdevices with controlled environmental parameters is presented. The system is capable of measuring key electrical parameters of the microdevices while controlling the environmental conditions around the microdevices. The test system is compact and thus can be integrated with standard test equipment for microdevices. By using a feed-forward decoupling algorithm, the presented test system is capable of generating a temperature range of 0–120 °C and a humidity range of 20–90% RH (0–55 °C), within a small footprint and weight. The accuracy for temperature and humidity control is ±0.1 °C and ±1% RH (30 °C), respectively. The functionality of the proposed test system is verified by integrating it with a piezo shaker to test the environmental reliability of an electromagnetic vibration energy harvester. The proposed system can be used as a proof-of-technology platform for characterizing the performance of microdevices with controlled environmental parameters.

scholarly journals The Relationship between Soil Electrical Parameters and Compaction of Sandy Clay Loam Soil

Agriculture ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 114
Author(s):  
Katarzyna Pentoś ◽  
Krzysztof Pieczarka ◽  
Kamil Serwata
Keyword(s):  
Electrical Conductivity ◽  
Magnetic Susceptibility ◽  
Precision Agriculture ◽  
Soil Compaction ◽  
Soil Layer ◽  
Soil Parameters ◽  
Soil Electrical Conductivity ◽  
Electrical Parameters ◽  
Management Zones ◽  
Additional Information

Soil spatial variability mapping allows the delimitation of the number of soil samples investigated to describe agricultural areas; it is crucial in precision agriculture. Electrical soil parameters are promising factors for the delimitation of management zones. One of the soil parameters that affects yield is soil compaction. The objective of this work was to indicate electrical parameters useful for the delimitation of management zones connected with soil compaction. For this purpose, the measurement of apparent soil electrical conductivity and magnetic susceptibility was conducted at two depths: 0.5 and 1 m. Soil compaction was measured for a soil layer at 0–0.5 m. Relationships between electrical soil parameters and soil compaction were modelled with the use of two types of neural networks—multilayer perceptron (MLP) and radial basis function (RBF). Better prediction quality was observed for RBF models. It can be stated that in the mathematical model, the apparent soil electrical conductivity affects soil compaction significantly more than magnetic susceptibility. However, magnetic susceptibility gives additional information about soil properties, and therefore, both electrical parameters should be used simultaneously for the delimitation of management zones.

scholarly journals Particle Filtering Based Remaining Useful Life Prediction for Electromagnetic Coil Insulation

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 473
Author(s):  
Haifeng Guo ◽  
Aidong Xu ◽  
Kai Wang ◽  
Yue Sun ◽  
Xiaojia Han ◽  
...  
Keyword(s):  
Particle Filtering ◽  
Remaining Useful Life ◽  
Electrical Parameters ◽  
Degradation Model ◽  
Accelerated Degradation ◽  
Insulation Failure ◽  
Electromagnetic Coils ◽  
Degradation Monitoring ◽  
Insulation Degradation ◽  
Useful Life

Electromagnetic coils are one of the key components of many systems. Their insulation failure can have severe effects on the systems in which coils are used. This paper focuses on insulation degradation monitoring and remaining useful life (RUL) prediction of electromagnetic coils. First, insulation degradation characteristics are extracted from coil high-frequency electrical parameters. Second, health indicator is defined based on insulation degradation characteristics to indicate the health degree of coil insulation. Finally, an insulation degradation model is constructed, and coil insulation RUL prediction is performed by particle filtering. Thermal accelerated degradation experiments are performed to validate the RUL prediction performance. The proposed method presents opportunities for predictive maintenance of systems that incorporate coils.

Sign in / Sign up

Export Citation Format

Share Document