Influence of equipment size and installation height on electricity production in an Archimedes screw-based ultra-low head small hydropower plant and its economic feasibility

2019 ◽  
Vol 142 ◽  
pp. 468-477 ◽  
Author(s):  
Henrik Lavrič ◽  
Andraž Rihar ◽  
Rastko Fišer
Keyword(s):  
Economic Feasibility ◽  
Hydropower Plant ◽  
Electricity Production ◽  
Small Hydropower ◽  
Low Head ◽  
Equipment Size

scholarly journals Performance Analysis of a Low Head Water Vortex Turbine

2021 ◽  
Vol 9 ◽  
pp. 31-36
Author(s):  
Badhan Saha ◽  
Mazharul Islam ◽  
Khondoker Nimul Islam ◽  
Jubair Naim ◽  
Md Shahriar Farabi
Keyword(s):  
Input Power ◽  
Vital Role ◽  
Hydropower Plant ◽  
Water Tank ◽  
Small Hydropower ◽  
Environment Friendly ◽  
Local Resources ◽  
Low Head ◽  
Overall Efficiency ◽  
Run Of River

A small hydropower plant is an environment-friendly renewable energy technology. The run-of-river type gravitational water vortex turbine can be designed to produce electricity at sites with low water heads. In this study, an experimental investigation was undertaken on this type of turbine with a water tank and a runner which is connected to a shaft. At the end of the shaft, a rope brake was attached to measure the output power, torque and overall efficiency of the vortex turbine by varying flow rates. The designed vortex turbine can achieve an overall efficiency of . The experimental results were validated with available data in the literature and theories associated with the turbine. The results also showed that the flow rate plays a vital role in generating power, torque as well as overall efficiency. The project was completed using local resources and technologies. Moreover, as water is used as the input power, this project is eco-friendly which has no adverse effect on the environment.

scholarly journals TINJAUAN POTENSI TEKNIS DAN KELAYAKAN EKONOMI PLTA PADA PROYEK KERJA SAMA PEMERINTAH DENGAN BADAN USAHA BENDUNGAN MERANGIN

2021 ◽  
Vol 17 (2) ◽  
pp. 95-110
Author(s):  
Agustia Larasari ◽  
Jessica Sitorus ◽  
Moh. Bagus Wiratama Asad ◽  
Ary Firmana
Keyword(s):  
Economic Value ◽  
Peak Load ◽  
Average Power ◽  
Economic Feasibility ◽  
Hydropower Plant ◽  
Electricity Production ◽  
Hydropower Plants ◽  
Technical Potential ◽  
Power And Energy ◽  
Multipurpose Dam

One of the utilizations of a multipurpose dam that has socio-economic value during its operation iselectricity generation. The addition of a hydropower component to a PPP project is quite a challenge due to substantial uncertainty related to hydrological aspects that will impact electricity production and revenue, as well as high initial investment costs for generating units. This study aims to map the technical potential of hydropower and evaluate the economic feasibility of hydropower in the Merangin Dam PPP Project. The potential for power and energy generation is obtained through simulations of the hydropower operation for 19 years using hydrological data, HEC-HMS model generated-data, and dam engineering design. According to the results, the technical potential of hydropower can produce, on average, power of Pp = 103.8 MW during peak load, Pb = 98.53 MW during base load, and total energy of 636.66 GWh/year. The economic potential is evaluated through social cost-benefits analysis (SCBA) by estimating the additional benefits obtained from the hydropower compared to the PPP structure of the Merangin Dam without hydropower. Through SCBA, the addition of hydropower to the Merangin Dam PPP structure has an EIRR value of 35.24%, NPV of Rp. 2.104.212.122.723,- and BCR = 3.06. Based on these indicators, the provision of hydropower plants is considered economically feasible because the benefits that will be generated and obtained by the community are higher than the economic costs incurred.Keywords: Technical potential, economic feasibility, hydropower plant, multipurpose dam, PPP

scholarly journals An Improved Techno-Economic Approach to Determination of More Precise Installed Parameter for Small Hydropower Plants

Water ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2419
Author(s):  
Vidosava Vilotijević ◽  
Uroš Karadžić ◽  
Radoje Vujadinović ◽  
Vuko Kovijanić ◽  
Ivan Božić
Keyword(s):  
Net Present Value ◽  
Design Flow ◽  
Hydropower Plant ◽  
Electricity Production ◽  
Small Hydropower ◽  
A Value ◽  
Hydropower Plants ◽  
Wide Range ◽  
Installed Capacity

Designing a small hydropower plant (SHPP) necessitates fulfillment of energy and ecological constraints, so a well-defined design flow is of the utmost significance. The main parameters of each SHPP are determined by appropriate techno-economic studies, whereas an improved approach to defining more precise SHPP installed parameter is presented in this paper. The SHPP installed parameter is the ratio of the design flow and averaged perennial flow obtained from the flow duration curve at the planned water intake location. Previous experiences in the design of SHPPs have shown that the SHPP installed parameter has a value in a wide range without the existence of an unambiguous equation for its determination. Therefore, with this aim, the thirty-eight (38) small watercources in the territory of Montenegro, denominated for the construction of SHPPs, have been investigated. SHPPs are divided into two groups depending on the installed capacity and the method of calculating the purchase price of electricity. For both groups, the range of SHPP installed parameter is determined according to the technical and economic criteria: the highest electricity production, the highest income, net present value (NPV), internal rate of return (IRR), and payback period (PB).

Analyzing the impact of intake structure on the flow at low pressure SHPP

2021 ◽  
Author(s):  
Lucia Bytčanková ◽  
Ján Rumann ◽  
Peter Dušička
Keyword(s):  
Velocity Distribution ◽  
Flow Velocity ◽  
Hydropower Plant ◽  
Small Hydropower ◽  
Hydropower Plants ◽  
Low Head ◽  
Structural Parts ◽  
Numerical Flow Modeling ◽  
Intake Structure ◽  
The Impact

AbstractThe structural parts of intake structures directly affect the flow velocity distribution in the turbine intake of small hydropower plants, where inhomogeneous flow leads to uneven load of the turbine units causing operational problems. A 2D numerical flow modeling was used for investigations of the flow in an intake structure of a low-head small hydropower plant. The effects of shape changes of the intake structure on the flow velocity distribution in the turbine intakes were investigated and assessed proving significant effect of the shapes of the intake structure on the flow homogeneity in turbine intakes.

scholarly journals Development of a Hydropower Turbine Using Seawater from a Fish Farm

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 266
Author(s):  
Md Rakibuzzaman ◽  
Sang-Ho Suh ◽  
Hyoung-Ho Kim ◽  
Youngtae Ryu ◽  
Kyung Yup Kim
Keyword(s):  
Power Plants ◽  
Guide Vane ◽  
Cross Flow ◽  
Synchronous Generator ◽  
Fish Farm ◽  
Hydropower Plant ◽  
Fish Farms ◽  
Data Simulation ◽  
Small Hydropower ◽  
Hydropower Plants

Discharge water from fish farms is a clean, renewable, and abundant energy source that has been used to obtain renewable energy via small hydropower plants. Small hydropower plants may be installed at offshore fish farms where suitable water is obtained throughout the year. It is necessary to meet the challenges of developing small hydropower systems, including sustainability and turbine efficiency. The main objective of this study was to investigate the possibility of constructing a small hydropower plant and develop 100 kW class propeller-type turbines in a fish farm with a permanent magnet synchronous generator (PMSG). The turbine was optimized using a computer simulation, and an experiment was conducted to obtain performance data. Simulation results were then validated with experimental results. Results revealed that streamlining the designed shape of the guide vane reduced the flow separation and improved the efficiency of the turbine. Optimizing the shape of the runner vane decreased the flow rate, reducing the water power and increasing the efficiency by about 5.57%. Also, results revealed that tubular or cross-flow turbines could be suitable for use in fish farm power plants, and the generator used should be waterproofed to avoid exposure to seawater.

scholarly journals Fishways as Downstream Routes in Small Hydropower Plants: Experiences with a Potamodromous Cyprinid

Water ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1041
Author(s):  
Francisco Javier Sanz-Ronda ◽  
Juan Francisco Fuentes-Pérez ◽  
Ana García-Vega ◽  
Francisco Javier Bravo-Córdoba
Keyword(s):  
General Assumption ◽  
Downstream Migration ◽  
Life Cycles ◽  
Hydropower Plant ◽  
Small Hydropower ◽  
Pit Tag ◽  
Safe Alternative ◽  
Hydropower Plants ◽  
Longitudinal Connectivity ◽  
Alternative Routes

Fish need to move upstream and downstream through rivers to complete their life cycles. Despite the fact that fishways are the most commonly applied solution to recover longitudinal connectivity, they are not considered viable for downstream migration. Therefore, alternative facilities are recommended to facilitate downstream migration. However, a few recent studies have disagreed with this general assumption, showing the potential for bidirectional movements. This study advances our understanding of the potential of fishways for downstream migration by studying their efficiency in a run-of-the-river hydropower plant in the Duero River (Spain). To achieve this, downstream movements of the Iberian barbel (n = 299) were monitored in a stepped fishway for two years with passive integrated transponder (PIT)-tag technology, considering the effect of fish origin and release zone. The results showed that 24.9% of barbels descended through the fishway, with the origin and release zone affecting the fishway location. In addition, downstream movements were observed throughout the whole year, except in winter. The study concludes that, under specific scenarios, fishways could act as safe alternative routes for downstream migration.

Sign in / Sign up

Export Citation Format

Share Document