Study on personalized microbial formulation during high-temperature aerobic fermentation of different types of food wastes

2021 ◽  
pp. 152561
Author(s):  
Dandan Liu ◽  
Xinxin Ma ◽  
Jianli Huang ◽  
Zhifei Shu ◽  
Xu Chu ◽  
...  
Keyword(s):  
High Temperature ◽  
Food Wastes ◽  
Aerobic Fermentation ◽  
Different Types

scholarly journals GERMINATION AND VIGOUR IN SEEDS OF THE COWPEA IN RESPONSE TO SALT AND HEAT STRESS

2019 ◽  
Vol 32 (1) ◽  
pp. 143-151 ◽  
Author(s):  
Luma Rayane de Lima Nunes ◽  
Paloma Rayane Pinheiro ◽  
Charles Lobo Pinheiro ◽  
Kelly Andressa Peres Lima ◽  
Alek Sandro Dutra
Keyword(s):  
Salt Stress ◽  
Heat Stress ◽  
High Temperature ◽  
Low Temperature ◽  
Vigna Unguiculata ◽  
Salt Concentration ◽  
Dry Weight ◽  
Germination Percentage ◽  
Different Types ◽  
Different Temperatures

ABSTRACT Salinity is prejudicial to plant development, causing different types of damage to species, or even between genotypes of the same species, with the effects being aggravated when combined with other types of stress, such as heat stress. The aim of this study was to evaluate the tolerance of cowpea genotypes (Vigna unguiculata L. Walp.) to salt stress at different temperatures. Seeds of the Pujante, Epace 10 and Marataoã genotypes were placed on paper rolls (Germitest®) moistened with different salt concentrations of 0.0 (control), 1.5, 3.0, 4.5 and 6.0 dS m-1, and placed in a germination chamber (BOD) at temperatures of 20, 25, 30 and 35°C. The experiment was conducted in a completely randomised design, in a 3 × 4 × 5 scheme of subdivided plots, with four replications per treatment. The variables under analysis were germination percentage, first germination count, shoot and root length, and total seedling dry weight. At temperatures of 30 and 35°C, increases in the salt concentration were more damaging to germination in the Epace 10 and Pujante genotypes, while for the Marataoã genotype, damage occurred at the temperature of 20°C. At 25°C, germination and vigour in the genotypes were higher, with the Pujante genotype proving to be more tolerant to salt stress, whereas Epace 10 and Marataoã were more tolerant to high temperatures. Germination in the cowpea genotypes was more sensitive to salt stress when subjected to heat stress caused by the low temperature of 20°C or high temperature of 35°C.

The effect of high temperature on kernel dimensions and the type and occurrence of kernel damage in rice

1991 ◽  
Vol 42 (3) ◽  
pp. 485 ◽  
Author(s):  
T Tashiro ◽  
IF Wardlaw
Keyword(s):  
High Temperature ◽  
Oryza Sativa L ◽  
Temperature Treatment ◽  
High Temperature Treatment ◽  
Published Data ◽  
Starch Granules ◽  
Endosperm Tissue ◽  
Razor Blade ◽  
Light Refraction ◽  
Different Types

Rice (Oryza sativa L. cv. Calrose) growing at 27/22�C was either transferred to day/night temperatures ranging from 24/19 to 39/34�C 7days after heading and held at these temperatures until maturity, or transferred to a temperature of 36/31�C for 8 day periods at regular intervals commencing from heading. Kernel dimensions were measured directly and the types of kernel damage at maturity were characterized by direct viewing under the light microscope of intact and sectioned kernels, or by scanning electron microscopy of the exposed surface of kernels cut transversely with a razor blade. Kernel thickness was reduced most by high temperature treatments commencing 12 days after heading, but other kernel dimensions (length and width) were most sensitive to high temperature earlier in development. Sterility and pathenocarpy were most evident when temperature treatments commenced at heading (approximately 2 days before anthesis) and were greatest at the highest temperature (39/34�C). Abortive and opaque kernels were most evident when the high temperature commenced 4 days after heading and were also most numerous at the highest temperature tested. From observations on the morphology of the kernels it appears that temperatures above 27/22�C can interfere with the early stages of cell division and development in the endosperm. Chalky endosperm tissue occurred in several forms depending on both the temperature level and the timing of the temperature treatment. White-core kernels were only evident at a temperature of 27/22�C. White-back kernels were most numerous at 36/31�C and when the high temperature treatment commenced 16 days after heading. Milky-white kernels were found in all but the lowest temperature treatment (24/19�C), with a peak at 36/31�C and this type of damage was most evident when the high temperature treatment commenced 12 days after heading. Differences in endosperm cellular morphology were observed between the different types of damage, and in accord with other published data the chalky appearance was associated with the development of numerous air spaces between loosely packed starch granules and a change in light refraction.

Well Clean-Up Using a Combined Thermochemical/Chelating Agent Fluids

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Mohamed Mahmoud
Keyword(s):  
High Temperature ◽  
Filter Cake ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Chelating Agent ◽  
Drilling Fluids ◽  
Gas Wells ◽  
Oil And Gas Wells ◽  
Different Types ◽  
Cake Removal

The well clean-up process involves the removal of impermeable filter cake from the formation face. This process is essential to allow the formation fluids to flow from the reservoir to the wellbore. Different types of drilling fluids such as oil- and water-based drilling fluids are used to drill oil and gas wells. These drilling fluids are weighted with different weighting materials such as bentonite, calcium carbonate, and barite. The filter cake that forms on the formation face consists mainly of the drilling fluid weighting materials (around 90%), and the rest is other additives such as polymers or oil in the case of oil-base drilling fluids. The process of filter cake removal is very complicated because it involves more than one stage due to the compatibility issues of the fluids used to remove the filter cake. Different formulations were used to remove different types of filter cake, but the problem with these methods is the removal efficiency or the compatibility. In this paper, a new method was developed to remove different types of filter cakes and to clean-up oil and gas wells after drilling operations. Thermochemical fluids that consist of two inert salts when mixed together will generate very high pressure and high temperature in addition to hot water and hot nitrogen. These fluids are sodium nitrate and ammonium chloride. The filter cake was formed using barite and calcite water- and oil-based drilling fluids at high pressure and high temperature. The removal process started by injecting 500 ml of the two salts and left for different time periods from 6 to 24 h. The results of this study showed that the newly developed method of thermochemical removed the filter cake after 6 h with a removal efficiency of 89 wt% for the barite filter cake in the water-based drilling fluid. The mechanisms of removal using the combined solution of thermochemical fluid and ethylenediamine tetra-acetic acid (EDTA) chelating agent were explained by the generation of a strong pressure pulse that disturbed the filter cake and the generation of the high temperature that enhanced the barite dissolution and polymer degradation. This solution for filter cake removal works for reservoir temperatures greater than 100 °C.

Investigation on Thermal Stability of Geopolymer Based Zeolite in Fire Case Study

2020 ◽  
Vol 1009 ◽  
pp. 31-36
Author(s):  
Kanokwan Kanyalert ◽  
Prinya Chindaprasirt ◽  
Duangkanok Tanangteerapong
Keyword(s):  
Weight Loss ◽  
Compressive Strength ◽  
High Temperature ◽  
Fly Ash ◽  
Alkali Activation ◽  
Different Types ◽  
Temperature Exposure ◽  
In Fire ◽  
Thermal Stability Of

This work aims to reveal the effects of zeolite on properties of fly ash based geopolymer under high temperature at 300 °C, 600 °C and 900 °C. The specimens were prepared by alkali activation of fly ash, which was partially replaced by two different types of zeolite at 10%, 20% and 30% by weight. The specimens were analyzed for the maximum compressive strength, weight loss percentage, XRD and SEM. The results highlighted that the percentage of weight loss increased with the ratio of zeolite replacement. The compressive strength of geopolymer with synthetic zeolite and natural zeolite at 7, 28, 60 days were similar. The high-temperature exposure resulted in the reduction in compressive strength in all proportions. At the same temperature, compressive strength of all specimens were not significantly different.

Quantifying Heterogeneous Microstructures: Core and Mantle Subgrains in Deformed Calcite

2007 ◽  
Vol 550 ◽  
pp. 307-312 ◽  
Author(s):  
S.L.A. Valcke ◽  
M.R. Drury ◽  
J.H.P. de Bresser ◽  
G.M. Pennock
Keyword(s):  
High Temperature ◽  
Subgrain Size ◽  
High Temperature Creep ◽  
Stress Dependence ◽  
Electron Backscattered Diffraction ◽  
Geological Materials ◽  
The Core ◽  
Different Types ◽  
Heterogeneous Microstructures ◽  
Deformation Stress

Calcite deformed by high temperature creep develops a heterogeneous microstructure consisting of deformed and recrystallised grains. The deformed grains either contain homogeneously distributed subgrains of similar size, or heterogeneously distributed small subgrains at grain boundaries (mantle subgrains) and relatively large subgrains in the core of grains (core subgrains). This paper demonstrates a method using electron backscattered diffraction (EBSD) to distinguish between the different types of grains and subgrains and to measure their sizes separately. In geological materials the average subgrain size, regardless of the subgrain type, is often used to estimate the deformation stress. However, this paper shows that mantle and core subgrain types only show a weak or no stress dependence.

scholarly journals Phase Stability Diagrams for High Temperature Corrosion Processes

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
J. J. Ramos-Hernandez ◽  
J. Porcayo-Calderon ◽  
V. M. Salinas-Bravo ◽  
C. D. Arrieta-Gonzalez ◽  
J. G. Gonzalez-Rodriguez ◽  
...  
Keyword(s):  
High Temperature ◽  
Phase Stability ◽  
Fossil Fuels ◽  
Chemical Species ◽  
Data Bases ◽  
Fused Salts ◽  
Stability Diagrams ◽  
Different Types ◽  
Vanadium Salts ◽  
Engineering Alloys

Corrosion phenomena of metals by fused salts depend on chemical composition of the melt and environmental conditions of the system. Detail knowledge of chemistry and thermodynamic of aggressive species formed during the corrosion process is essential for a better understanding of materials degradation exposed to high temperature. When there is a lack of kinetic data for the corrosion processes, an alternative to understand the thermodynamic behavior of chemical species is to utilize phase stability diagrams. Nowadays, there are several specialized software programs to calculate phase stability diagrams. These programs are based on thermodynamics of chemical reactions. Using a thermodynamic data base allows the calculation of different types of phase diagrams. However, sometimes it is difficult to have access to such data bases. In this work, an alternative way to calculate phase stability diagrams is presented. The work is exemplified in the Na-V-S-O and Al-Na-V-S-O systems. This system was chosen because vanadium salts is one of the more aggressive system for all engineering alloys, especially in those processes where fossil fuels are used.

High Dose High Temperature Ion Implantation of Ge into 4H-SiC

2006 ◽  
Vol 527-529 ◽  
pp. 851-854 ◽  
Author(s):  
Thomas Kups ◽  
Petia Weih ◽  
M. Voelskow ◽  
Wolfgang Skorupa ◽  
Jörg Pezoldt
Keyword(s):  
High Temperature ◽  
Ion Implantation ◽  
Lattice Site ◽  
Lattice Distortion ◽  
Stacking Faults ◽  
Implantation Dose ◽  
Location Analysis ◽  
High Dose ◽  
Site Location ◽  
Different Types

A box like Ge distribution was formed by ion implantation at 600°C. The Ge concentration was varied from 1 to 20 %. The TEM investigations revealed an increasing damage formation with increasing implantation dose. No polytype inclusions were observed in the implanted regions. A detailed analysis showed different types of lattice distortion identified as insertion stacking faults. The lattice site location analysis by “atomic location by channelling enhanced microanalysis” revealed that the implanted Ge is mainly located at interstitial positions.

Sign in / Sign up

Export Citation Format

Share Document