Ductile deformation of K-feldspar in dry eclogite facies shear zones in the Bergen Arcs, Norway

2000 ◽  
Vol 320 (2) ◽  
pp. 107-121 ◽  
Author(s):  
U. Altenberger ◽  
S. Wilhelm
Lithos ◽  
2011 ◽  
Vol 127 (1-2) ◽  
pp. 222-238 ◽  
Author(s):  
S. Angiboust ◽  
P. Agard ◽  
H. Raimbourg ◽  
P. Yamato ◽  
B. Huet
Keyword(s):  

2021 ◽  
Author(s):  
Carolyn Tewksbury-Christle ◽  
Alissa Kotowski ◽  
Whitney Behr

<p>The strength, or viscosity, of the subduction interface is a key parameter in subduction dynamics, influencing both long-term subduction plate speeds and short-term transient deformation styles. Fossil subduction interfaces exhumed from downdip of the megathrust record ductile deformation accommodated by diverse lithologies, including metasedimentary and metamafic rocks. Existing flow laws for quartz-rich rocks predict relatively low viscosities, in contrast to high viscosities predicted for basalt and eclogite, but the rheological properties of blueschists representative of metamorphosed oceanic crust of the down-going slab are poorly constrained. Two key questions remain: 1) are there significant viscosity contrasts between blueschists and quartz- or mica-rich metasedimentary rocks, and 2) what are the microscale mechanisms for creep in naturally deformed blueschists and how do they vary with pressure and temperature? To address these questions, we characterized deformation in natural samples from the Condrey Mountain Schist (CMS) in northern California, USA, and the Cycladic Blueschist Unit (CBU) on Syros Island, Cyclades, Greece, using outcrop-scale structural observations, optical microscopy, and Electron Backscatter Diffraction. The CMS and CBU record pressure-temperature conditions of 0.8-1.1 GPa, 350-450°C and 1.4-1.8 GPa, 450-550°C, respectively. </p><p>In the field, blueschists form m- to km-scale lenses that are interfolded with quartz schists, ultramafics, and, in the CBU, eclogites and marbles. At the outcrop scale in both localities, quartz-rich schists and blueschists each exhibit strong foliations and lineations and planar contacts at lithological boundaries. At the thin section scale, the prograde foliation and mineral lineation in blueschists are commonly defined by Na-amphiboles elongated in the lineation direction. Crystallographic preferred orientations in Na-amphibole in all samples have c-axes parallel to lineation and a-axes predominantly defining point-maxima perpendicular to the foliation, suggesting some component of dislocation activity for all temperature conditions in our sample suite. Microtextures in lower temperature CMS samples suggest strain accommodation primarily by dislocation glide and kinking in Na-amphibole, with extremely high-aspect-ratio grains and limited evidence for climb-controlled dynamic recrystallization. Some higher temperature CBU samples show large porphyroclasts with apparent ‘core-and-mantle’-type recrystallization textures and subgrain orientation analyses consistent with the (hk0)[001] slip systems. In contrast, epidote grains accommodate less strain than Na-amphibole, via some combination of rigid rotation, brittle boudinage, and minor intracrystalline plasticity.</p><p>Observations of evenly-distributed strain, despite lithological heterogeneity, suggest low viscosity contrasts and comparable bulk strengths of quartz schists and blueschists. Our microstructural observations suggest that Na-amphibole was the weakest phase and accommodated the majority of strain in mafic blueschists. Dislocation activity, and not just rigid-body-rotation or diffusional processes, accommodated some component of strain and possibly transitioned with increasing temperature from glide- to climb-controlled. Although effective viscosities appear to be similar, subduction interface shear zones dominated by blueschists may exhibit a power-law rheology consistent with dislocation activity, in contrast to the common inference of Newtonian creep in metasediments. Complementary experimental work on CMS and CBU rocks will also be presented at this meeting (see Tokle et al. and Hufford et al.).</p>


2021 ◽  
pp. 58-85
Author(s):  
Jean-Luc Bouchez ◽  
Adolphe Nicolas

In contrast to the elastic deformation, which is reversible, usually neglected by field geologists but important for geophysicists working in seismology, ductile deformation is irreversible. This chapter is restricted to solid materials. Materials containing a melt fraction will be examined in Chapter 7. In the geological literature, ‘ductile’ is often used as a synonym for ‘plastic’. The latter is rather used, and will be used to specify deformation mechanisms that dominantly involve the action of dislocations. In contrast to brittle deformation, which by essence is discontinuous and highly localized (see Chapter 3), ductile deformation is generally continuous and affects large volumes of rock. However, ductile deformation may be concentrated into restricted rock volumes (or domains). Such localization is common in shear zones and/or when superplastic deformation mechanism is involved. Plastic deformation mechanisms naturally depend on temperature, magnitude of the applied stress, mineral nature and grain-size of the rocks. In upper parts of the crust, fluids are able to carry chemical elements over large distances and influence the deformation mechanisms. Micrographs of several microstructural types as well as deformation maps for olivine and calcite are given at the end of this chapter.


1993 ◽  
Vol 57 (386) ◽  
pp. 55-66 ◽  
Author(s):  
D. Brown ◽  
K. R. McClay

AbstractThe Vangorda Pb-Zn-Ag orebody is a 7.1 M tonne, polydeformed stratiform massive sulphide deposit in the Anvil mining district, Yukon, Canada. Five sulphide lithofacies have been identified within the desposit with a typical mineralogy of pyrite, sphalerite, galena, and barite. Pyrrhotite-sphaleritemagnetite assembalges are locally developed. Etched polished sections of massive pyrite ores display relict primary depositional pyrite textures such as colloform growth zoning and spheroidal/framboidal features. A wide variety of brittle deformation, ductile deformation, and annealing textures have been identified. Brittle deformation textures include thin zones of intense cataclasis, grain indentation and axial cracking, and grain boundary sliding features. Ductile deformation textures include strong preferred grain shape orientations, dislocation textures, grain boundary migration, dynamic recrystallisation and pressure solution textures. Post deformational annealing has produced grain growth with lobate grain boundaries, 120° triple junctions and idioblastic pyrite porphyroblasts. The distribution of deformation textures within the Vangorda orebody suggests strong strain partitioning along fold limbs and fault/shear zones, it is postulated that focussed fluid flow in these zones had significant effects on the deformation of these pyritic ores.


2020 ◽  
Vol 50 (1) ◽  
pp. 27-81 ◽  
Author(s):  
Stefan Bergman ◽  
Pär Weihed

AbstractTwo lithotectonic units (the Norrbotten and Överkalix units) occur inside the Paleoproterozoic (2.0–1.8 Ga) Svecokarelian orogen in northernmost Sweden. Archean (2.8–2.6 Ga and possibly older) basement, affected by a relict Neoarchean tectonometamorphic event, and early Paleoproterozoic (2.5–2.0 Ga) cover rocks constitute the pre-orogenic components in the orogen that are unique in Sweden. Siliciclastic sedimentary rocks, predominantly felsic volcanic rocks, and both spatially and temporally linked intrusive rock suites, deposited and emplaced at 1.9–1.8 Ga, form the syn-orogenic component. These magmatic suites evolved from magnesian and calc-alkaline to alkali–calcic compositions to ferroan and alkali–calcic varieties in a subduction-related tectonic setting. Apatite–Fe oxide, including the world's two largest underground Fe ore mines (Kiruna and Malmberget), skarn-related Fe oxide, base metal sulphide, and epigenetic Cu–Au and Au deposits occur in the Norrbotten lithotectonic unit. Low- to medium-pressure and variable temperature metamorphic conditions and polyphase Svecokarelian ductile deformation prevailed. The general northwesterly or north-northeasterly structural grain is controlled by ductile shear zones. The Paleotectonic evolution after the Neoarchean involved three stages: (1) intracratonic rifting prior to 2.0 Ga; (2) tectonic juxtaposition of the lithotectonic units during crustal shortening prior to 1.89 Ga; and (3) accretionary tectonic evolution along an active continental margin at 1.9–1.8 Ga.


1989 ◽  
Vol 26 (11) ◽  
pp. 2224-2235 ◽  
Author(s):  
Vicki L. Hansen ◽  
James K. Mortensen ◽  
Richard L. Armstrong

The Teslin suture zone (TSZ) comprises a portion of the Yukon–Tanana terrane (YT), in the Yukon, formed by steeply dipping layering and L–S tectonite foliation. The TSZ forms the fundamental tectonic boundary between rocks deposited along the ancient margin of North America and allochthonous terranes to the west. TSZ tectonites evolved during initial penetrative dip-slip deformation (Dds) and later dextral strike-slip shear (Dss) along steep, 1–3 km wide shear zones. Several workers have speculated that the TSZ and related YT heterogeneous ductile deformation and associated metamorphism are Devonian to Mississippian in age and related to the intrusion of a similar-age orthogneiss throughout the Yukon and Alaska. However, recent structural and metamorphic studies of the TSZ provide evidence contradicting this view. New isotopic evidence, presented herein, indicates that TSZ dynamothermal metamorphism was cooled by Early Jurassic time, that it cannot be related to Devonian–Mississippian and Permian granitic intrusion, and that it predates Cretaceous plutonism.U–Pb zircon dating of peraluminous orthogneiss constrains primary peraluminous granite crystallization at 355 ± 25 Ma. Three Rb–Sr whole rock + muscovite and three K–Ar muscovite cooling dates of rocks containing Dds and Dss fabrics place a younger age limit of 182–213 Ma (latest Triassic to Early Jurassic) on Dds/Dss deformation. In addition, three Rb–Sr whole-rock + muscovite isochrons and one K–Ar date on biotite indicate peraluminous orthogneisses in the eastern portion of the study area were affected by a mid-Cretaceous thermal event. These data, togemer with structural and metamorphic relationships reported elsewhere, are summarized in pressure–temperature–time–displacement diagrams illustrating the evolution of TSZ and adjacent rocks from Devonian to Late Cretaceous time. Tectonites within the TSZ can be differentiated from peraluminous orthogneiss east of the d'Abbadie fault on the basis of their respective cooling histories.


1994 ◽  
Vol 31 (3) ◽  
pp. 583-596 ◽  
Author(s):  
David Corrigan ◽  
Nicholas G. Culshaw ◽  
Jim K. Mortensen

The Parautochthonous Belt in the region of Key Harbour, Ontario, is composed of Early Proterozoic migmatitic para- and orthogneiss and Mid-Proterozoic granitoids, which were reworked during the Grenville orogeny. Grenvillian deformation is localized into anastomosing arrays of high-strain shear zones enclosing elongate bands and lozenges of rock subjected to lower and near-coaxial strain. Crosscutting relationships preserved in the low-strain domains document two pre-Grenvillian plutonic and tectonometamorphic events, which are bracketed in age by U–Pb zircon geochronology. A 1694 Ma leucogranite intrudes, and provides a minimum age for, high metamorphic grade gneisses formed during an earlier tectonometamorphic event (D1–M1). The leucogranite was intruded by mafic dykes, deformed, and metamorphosed at uppermost amphibolite facies during D2–M2, before the emplacement of Mid-Proterozoic granitoids at ca. 1450 Ma. Following the emplacement of gabbro dykes and pods at ca. 1238 Ma, the area was overprinted by granulite to uppermost amphibolite facies metamorphism (Grenvillian), for which monazites provide a minimum age of ca. 1035 Ma. Titanite U–Pb ages of 1003 – 1004 Ma record cooling through 600 °C. A regionally important swarm of east–west-trending posttectonic pegmatite dykes dated by U–Pb zircon at 990 Ma provides a minimum age for Grenvillian ductile deformation. The present data support the contention that the Parautochthonous Belt in the Key Harbour area consists in part of reworked midcontinental crust of Early to Mid-Proterozoic age.


2020 ◽  
Author(s):  
Christoph Schrank

<p>About 50 years ago, John Ramsay and colleagues established the thorough foundation for the field-scale observational and mathematical description of the structures, deformation, and kinematics in ductile shear zones. Since then, these probably most important instabilities of the ductile lithosphere enjoyed an almost explosive growth in scientific attention. It is perhaps fair to say that this tremendous research effort featured four main themes:</p><p> </p><p>[1] The historic scientific nucleus – quantification of shear-zone geometry, strain and associated kinematic history from field observations</p><p> </p><p>[2] Qualitative and quantitative analysis of microphysical deformation mechanisms in the field and the laboratory</p><p> </p><p>[3] Shear-zone rheology</p><p> </p><p>[4] The development of physically consistent mathematical models for shear zones, mainly using continuum mechanics.</p><p> </p><p>In concert, these four cornerstones of shear-zone research enabled tremendous progress in our understanding of why and how ductile shear zones form. So, what are some of the outstanding problems?</p><p> </p><p>A truly comprehensive model for ductile shear zones must account for the vast range of length and time scales involved, each easily covering ten orders of magnitude, as well as the associated intimate coupling between thermal, hydraulic, mechanical, and chemical processes. The multi-scale and multi-physics nature of ductile shear zones generates scientific challenges for all four research themes named above. This presentation is dedicated to highlighting exciting challenges in themes 2, and 3 and 4.</p><p> </p><p>In the microanalytical arena [2], the nano-scale is an exciting new frontier, especially when it comes to the interplay between metamorphism and ductile deformation. The nano-frontier can be tackled with new synchrotron methods. I showcase some applications to fossil shear-zone samples and discuss opportunities for in-situ experiments. In the domain of rheology [3], I present some simple experiments with strain-softening materials and field observations that support the notion: transient rheological behaviour is very important for shear localisation. In the modelling domain [4], some recent examples for the intriguing physical consequences predicted by new multi-physics and cross-scale coupling terms in ductile localisation problems are illustrated.</p>


2020 ◽  
Author(s):  
Sarah Incel ◽  
Jörg Renner ◽  
Bjørn Jamtveit

<p>Plagioclase-rich lower crustal granulites exposed on the Lofoten archipelago, N Norway, display pseudotachylytes, reflecting brittle deformation, as well as ductile shear zones, highlighting plastic deformation. Pristine pseudotachylytes often show no or very little difference in mineral assemblage to their host-rocks that exhibit limited, if any, metamorphic alteration. In contrast, host-rock volumes that developed ductile shear zones exhibit significant hydration towards amphibolite or eclogite-facies assemblages within and near the shear zones. We combine experimental laboratory results and observations from the field to characterize the structural evolution of brittle faults in plagioclase-rich rocks at lower crustal conditions. We performed a series of deformation experiments on intact granulite samples at 2.5 GPa confining pressure,  a strain rate of 5×10<sup>-5</sup> s<sup>-1</sup>,  temperatures of 700 and 900 °C, and total strains of either ~7-8 % or ~33-36 %. Samples were either deformed ‘as-is’, i.e. natural samples without any treatment, or with ~2.5 wt.% H<sub>2</sub>O added. Striking similarities between the experimental and natural microstructures suggest that the transformation of precursory brittle structures into ductile shear zones at eclogite-facies conditions is most effective when hydrous fluids are available in excess.</p>


Sign in / Sign up

Export Citation Format

Share Document