Deformation mechanisms in naturally-deformed blueschist facies metabasalts: constraints from exhumed subduction complexes in Greece and California

Author(s):  
Carolyn Tewksbury-Christle ◽  
Alissa Kotowski ◽  
Whitney Behr

<p>The strength, or viscosity, of the subduction interface is a key parameter in subduction dynamics, influencing both long-term subduction plate speeds and short-term transient deformation styles. Fossil subduction interfaces exhumed from downdip of the megathrust record ductile deformation accommodated by diverse lithologies, including metasedimentary and metamafic rocks. Existing flow laws for quartz-rich rocks predict relatively low viscosities, in contrast to high viscosities predicted for basalt and eclogite, but the rheological properties of blueschists representative of metamorphosed oceanic crust of the down-going slab are poorly constrained. Two key questions remain: 1) are there significant viscosity contrasts between blueschists and quartz- or mica-rich metasedimentary rocks, and 2) what are the microscale mechanisms for creep in naturally deformed blueschists and how do they vary with pressure and temperature? To address these questions, we characterized deformation in natural samples from the Condrey Mountain Schist (CMS) in northern California, USA, and the Cycladic Blueschist Unit (CBU) on Syros Island, Cyclades, Greece, using outcrop-scale structural observations, optical microscopy, and Electron Backscatter Diffraction. The CMS and CBU record pressure-temperature conditions of 0.8-1.1 GPa, 350-450°C and 1.4-1.8 GPa, 450-550°C, respectively. </p><p>In the field, blueschists form m- to km-scale lenses that are interfolded with quartz schists, ultramafics, and, in the CBU, eclogites and marbles. At the outcrop scale in both localities, quartz-rich schists and blueschists each exhibit strong foliations and lineations and planar contacts at lithological boundaries. At the thin section scale, the prograde foliation and mineral lineation in blueschists are commonly defined by Na-amphiboles elongated in the lineation direction. Crystallographic preferred orientations in Na-amphibole in all samples have c-axes parallel to lineation and a-axes predominantly defining point-maxima perpendicular to the foliation, suggesting some component of dislocation activity for all temperature conditions in our sample suite. Microtextures in lower temperature CMS samples suggest strain accommodation primarily by dislocation glide and kinking in Na-amphibole, with extremely high-aspect-ratio grains and limited evidence for climb-controlled dynamic recrystallization. Some higher temperature CBU samples show large porphyroclasts with apparent ‘core-and-mantle’-type recrystallization textures and subgrain orientation analyses consistent with the (hk0)[001] slip systems. In contrast, epidote grains accommodate less strain than Na-amphibole, via some combination of rigid rotation, brittle boudinage, and minor intracrystalline plasticity.</p><p>Observations of evenly-distributed strain, despite lithological heterogeneity, suggest low viscosity contrasts and comparable bulk strengths of quartz schists and blueschists. Our microstructural observations suggest that Na-amphibole was the weakest phase and accommodated the majority of strain in mafic blueschists. Dislocation activity, and not just rigid-body-rotation or diffusional processes, accommodated some component of strain and possibly transitioned with increasing temperature from glide- to climb-controlled. Although effective viscosities appear to be similar, subduction interface shear zones dominated by blueschists may exhibit a power-law rheology consistent with dislocation activity, in contrast to the common inference of Newtonian creep in metasediments. Complementary experimental work on CMS and CBU rocks will also be presented at this meeting (see Tokle et al. and Hufford et al.).</p>

2020 ◽  
Author(s):  
Whitney Behr ◽  
Carolyn Tewksbury-Christle ◽  
Alissa Kotowski ◽  
Claudio Cannizzaro ◽  
Robert Blass ◽  
...  

<p>Episodic tremor and slow slip (ETS) is observed in several subduction zones down-dip of the locked megathrust, and may provide clues for preparatory processes before megathrust rupture. Exhumed rocks provide a unique opportunity to evaluate the sources of rheological heterogeneity on the subduction interface and their potential role in generating ETS-like behavior. We present data from two subduction interface shear zones representative of the down-dip extent of the megathrust: the Condrey Mountain Schist (CMS) in northern CA (greenschist to blueschist facies conditions) and the Cycladic Blueschist Unit (CBU) on Syros Island, Greece (blueschist to eclogite facies). Both complexes highlight the propensity for fluid-mediated metamorphic reactions to produce strong rheological heterogeneities:</p><p>In the CMW, hydration reactions led to progressive serpentinization of peridotite bodies that were entrained from the overriding plate and underplated along with oceanic-affinity sediments. The margins of each peridotite-serpentinite lens show extreme strain localization accommodated by dislocation glide and minor pressure solution in antigorite, whereas lens interiors show evidence for more distributed, alternating, frictional-viscous deformation, with abundant crack-seal veins occupied by antigorite, brucite and oxides that are in some places also ductilely sheared. Deformation in the surrounding metasedimentary matrix was purely viscous.</p><p>In the CBU on Syros Island, dehydration reactions in MORB-affinity basalts, subducted and underplated with oceanic and continental-affinity sediments, led to progressive development of strong eclogitic lenses within a weaker blueschist and metasedimentary matrix. The eclogite lenses are commonly coarse-grained and massive and show brittle deformation in the form of dilational and shear fractures/veins filled with quartz, white mica, glaucophane and/or chlorite. Brittle deformation in the eclogites is coeval with ductile deformation in the surrounding blueschist and metasedimentary matrix, indicating concurrent frictional-viscous flow.</p><p>Although we cannot easily distinguish transient deformation processes in exhumed rocks, we can use the following three approaches to assess whether these heterogeneities could have generated deformation behaviors similar to deep ETS: 1) We measure displacements within, and dimensions of the heterogeneities in outcrop/map-scale to estimate the maximum possible seismic moment that would be released when the frictional heterogeneities slip;  2) We compare deformation mechanisms inferred from field and microstructural observations to their expected mechanical behavior from rock deformation experiments; and 3) We use seismo-thermo-mechanical modeling to examine expected slip velocities and moment-duration ratios for frictional-viscous shear zones that are scaled to observations from nature and the lab.  </p><p>All three approaches suggest that frictional-viscous heterogeneities of the types and length-scales we observe in the exhumed rock record are compatible with ETS as documented in modern subduction zones.</p>


2020 ◽  
Author(s):  
Jaime A. Poblete ◽  
Paul H.G.M. Dirks ◽  
Zhaoshan Chang ◽  
Jan Marten Huizenga ◽  
Martin Griessmann ◽  
...  

Abstract The Watershed tungsten deposit (49.2 Mt avg 0.14% WO3) lies within the Mossman orogen, which comprises deformed Silurian-Ordovician metasedimentary rocks of the Hodgkinson Formation intruded by Carboniferous-Permian granites of the Kennedy Igneous Association. The Hodgkinson Formation in the Watershed area comprises skarn-altered conglomerate, psammite, and slate units that record four deformation events evolving from ductile, isoclinal, colinear folding with transposition (D1–D3) to brittle ductile shear zones (D4). Multiple felsic to intermediate dikes cut across the metasedimentary rocks at Watershed including: (1) Carboniferous, monzonite dikes (zircon U/Pb age of 350 ± 7 Ma) emplaced during D1–2; and (2) Permian granite plutons and dikes (zircon U/Pb ages of 291 ± 6, 277 ± 6, and 274 ± 6 Ma) and diorite (zircon U/Pb age of 281 ± 5 Ma) emplaced during D4. Tungsten mineralization is largely restricted to skarn-altered conglomerate, which preserves a peak metamorphic mineralogy formed during ductile deformation and comprises garnet (Grt40–87 Alm0–35Sps1–25Adr0–16), actinolite, quartz, clinopyroxene (Di36–59Hd39–61Jhn1–5), and titanite. A first mineralization event corresponds to the crystallization of disseminated scheelite in monzonite dikes (pre-D3) and adjacent units, with scheelite grains aligned in the S1–2 fabric and affected by D3 folding. This event enriched the Hodgkinson Formation in tungsten. The bulk of the scheelite mineralization formed during a second event and is concentrated in multistaged, shear-related, quartz-oligoclase-bearing veins and vein halos (muscovite 40Ar-39Ar weighted average age of 276 ± 6 Ma), which were emplaced during D4. The multistage veins developed preferentially in competent, skarn-altered conglomerate units and formed synchronous with four retrograde alteration stages. The retrograde skarn minerals include clinozoisite after garnet, quartz, plagioclase, scheelite, and phlogopite with minor sodium-rich amphibole, which formed during retrograde stages 1 and 2, accompanied by later muscovite, calcite, and chlorite formed during retrograde stage 3. Retrograde stage 4 was a late-tectonic, noneconomic sulfide stage. The principal controls on scheelite mineralization at Watershed were the following: (1) early monzonite dikes enriched in scheelite; (2) D4 shear zones that acted as fluid conduits transporting tungsten from source areas to traps; (3) skarn-altered conglomerate lenses that provide a competent host to facilitate vein formation and a source for calcium to form scheelite; and (4) an extensional depositional environment characterized by vein formation and normal faulting, which provide trapping structures for tungsten-bearing fluids, with decompression being a likely control on scheelite deposition. The coexistence of scheelite with oligoclase in monzonite dikes and veins suggests that tungsten was transported as NaHWO40. Exploration in the area should target Carboniferous monzonite, associated with later syn-D4 shear zones cutting skarn-altered conglomerate.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ritabrata Dobe ◽  
Anuja Das ◽  
Rabibrata Mukherjee ◽  
Saibal Gupta

AbstractHydrous fluids play a vital role in the chemical and rheological evolution of ductile, quartz-bearing continental crust, where fluid percolation pathways are controlled by grain boundary domains. In this study, widths of grain boundary domains in seven quartzite samples metamorphosed under varying crustal conditions were investigated using Atomic Force Microscopy (AFM) which allows comparatively easy, high magnification imaging and precise width measurements. It is observed that dynamic recrystallization at higher metamorphic grades is much more efficient at reducing grain boundary widths than at lower temperature conditions. The concept of force-distance spectroscopy, applied to geological samples for the first time, allows qualitative estimation of variations in the strength of grain boundary domains. The strength of grain boundary domains is inferred to be higher in the high grade quartzites, which is supported by Kernel Average Misorientation (KAM) studies using Electron Backscatter Diffraction (EBSD). The results of the study show that quartzites deformed and metamorphosed at higher grades have narrower channels without pores and an abundance of periodically arranged bridges oriented at right angles to the length of the boundary. We conclude that grain boundary domains in quartz-rich rocks are more resistant to fluid percolation in the granulite rather than the greenschist facies.


2021 ◽  
Author(s):  
Xuemei Cheng ◽  
Shuyun Cao

<p>Within orogenic zone and continental extensional area, it often developed metamorphic complex or metamorphic gneiss dome that widely exposed continental mid-lower crustal rocks, which is an ideal place to study exhumation processes of deep-seated metamorphic complex and rheology. The Yuanmou metamorphic complex is located in the south-central part of the "Kangdian Axis" in the western margin of Qiangtang Block and Yangtze Block, which is a part of the anticline of the Sichuan-Yunnan platform. Many research works mainly focus on the discussion of intrusion ages, aeromagnetic anomalies, and polymetallic deposits. However, the exhumation process and mechanism of the Yuanmou metamorphic complex are rarely discussed and still unclear. This study, based on detailed field geological observations, optical microscopy (OM), cathodoluminescence (CL), electron backscatter diffraction (EBSD) and electron probe (EMPA) were performed to illustrate the geological structure features, deformation-metamorphic evolution process and its tectonic significance of Yuanmou metamorphic complex during the exhumation process. All these analysis results indicate that the Yuanmou metamorphic complex generally exhibits a dome structure with deep metamorphic rocks and deformed rocks of varying degrees widely developed. Mylonitic gneiss and granitic intrusions are located in the footwall of the Yuanmou, which have suffered high-temperature shearing. The mylonitic fabrics and mineral stretching lineations in the deformed rock are strongly developed, forming typical S-L or L-shaped structural features. The high-temperature ductile deformation-metamorphism environment is high amphibolite facies, that is, the temperature range is between 620 ~ 690 ℃ and the pressure is between 0.8 ~ 0.95 Gpa. In the deformed rocks closed to the detachment fault, some of the mylonite fabric features are retained, but most of them have experienced a strongly overprinted retrogression metamorphism and deformation. At the top of the detachment fault zone, it is mainly composed of cataclasites and fault gouge. The comprehensive macro- and microstructural characteristics, geometry, kinematics, and mineral (amphibole, quartz and calcite) EBSD textures indicate that the Yuanmou metamorphic complex has undergone a progressive exhumation process during regional extension, obvious high-temperature plastic deformation-metamorphism in the early stage, and superimposed of low-temperature plastic-brittle and brittle deformation in the subsequent stage, which is also accompanied by strong fluid activities during the exhumation process.</p>


2018 ◽  
Vol 14 (18) ◽  
pp. 305
Author(s):  
Daï Bi Seydou Mathurin ◽  
Ouattara Gbele ◽  
Koffi Gnammytchet Barthélémy ◽  
Gnanzou Allou ◽  
Coulibaly Inza

The lithological and structural observations of the region of Brobo (Central Côte d'Ivoire) indicate a succession of metasedimentary rocks (micaschists with cordierite, silstones, graphitic sediments, sandstones with amphibole-garnet, etc.) intermixed with volcanic rocks (rhyolite, dacite, andesite, basalt and the volcanoclastics). The whole is intruded by granites with one or two micas, sometimes porphyries, granodiorites, gabbros, and granite gneisses. Interpretations of Landsat ETM+ , RadarSat-1 and SRTM remote sensing imageries, as well as field data, revealed several lineament directions which, after field control, correspond to major faults and shear zones. These large structures show the N-S, NE-SW, NNE-SSW, E-W, NWSE, and NNW-SSE orientations. The field data also made it possible to describe several structures and to propose a preliminary geodynamic model for the setting and structuring of the formations of this region. This model suggests that the geodynamic took place in three stages: distension with a deformation of basement formations generating a gneissocity (D1), as well as deposits of sediments in the basins; followed by a NW-SE to E-W convergence generating a cleavage in the volcanogenic series (D2). This phase of deformation continues while creating, locally, a strain slip cleavage or a transposed schistosity. The third cleavage affects the volcanogenic series (fractures cleavages, D3) and ends in large corridors of ductile shear zones and associated faults.


2022 ◽  
Author(s):  
John E. Busteed ◽  
Jesus Arroyo ◽  
Francisco Morales ◽  
Mohammed Omer ◽  
Francisco E. Fragachan

Abstract Uniformly distributing proppant inside fractures with low damage on fracture conductivity is the most important index of successful fracturing fluids. However, due to very low proppant suspension capacity of slickwater and friction reducers fracturing fluids and longer fracture closure time in nano & pico darcies formations, proppants settles quickly and accumulates near wellbore resulting in worse-than-expected well performance, as the fracture full capacity is not open and contributing to production. Traditionally, cross-linked polymer fluid systems are capable to suspend and transport high loading of proppants into a hydraulically generated fracture. Nevertheless, amount of unbroken cross-linked polymers is usually left in fractures causing damage to fracture proppant conductivity, depending on polymer loading. To mitigate these challenges, a low viscosity-engineered-fluid with excellent proppantcarrying capacity and suspension-in excess of 30 hours at static formation temperature conditions - has been designed, enhancing proppant placement and distribution within developed fractures, with a 98% plus retained conductivity. In this work experimental and numerical tests are presented together with the path followed in developing a network of packed structures from polymer associations providing low viscosity and maximum proppant suspension. Challenges encountered during field injection with friction are discussed together with the problem understanding characterized via extensive friction loop tests. Suspension tests performed with up to 8-10 PPA of proppant concentration at temperature conditions are shared, together with slot tests performed. Physics-based model results from a 3D Discrete Fracture Network simulator that computes viscosity, and elastic parameters based on shear rate, allows to estimate pressure losses along the flow path from surface lines, tubular goods, perforations, and fracture. This work will demonstrate the advanced capabilities and performance of the engineered fluid over conventional fracturing fluids and its benefits. Additionally, this paper will present field injection pressure analysis performed during the development of this fluid, together with a field case including production results after 8 months of treatment. The field case production decline observed after fracture treatment demonstrates the value of this system in sustaining well production and adding additional reserves.


2021 ◽  
Author(s):  
Anna Rogowitz ◽  
Renelle Dubosq ◽  
David Schneider ◽  
Kevin Schweinar ◽  
Baptiste Gault

<p>The interaction of trace elements, fluids and crystal defects plays a vital role in a crystalline material’s response to an applied stress. For example, dislocations can be arrested by the strain field of immobile defects (i.e., particles or precipitates) or by the accumulation of mobile solutes in their cores, which can lead to strain hardening. The rheology of minerals is also strongly influenced by interactions with fluids, which are typically known to facilitate ductile deformation in geomaterials (i.e., hydrolytic weakening, dissolution creep). Investigation of these nanometer scale processes however, requires a correlative approach combining high-spatial resolution analytical techniques. In recent years, increasing developments in microscopy and microanalysis have allowed for the compositional measurements and spatial imaging of materials at the near-atomic scale. Herein, we have combined electron backscatter diffraction (EBSD) mapping, electron channeling contrast imaging (ECCI), scanning transmission electron microscopy (STEM) and atom probe tomography (APT) on a naturally deformed polycrystalline pyrite aggregate from the Abitibi Subprovince in Canada to investigate the role of fluid inclusions on mineral rheology. The combined EBSD and ECCI data reveal minor crystal misorientation and low-angle grain boundary development in the vicinity and at the tip of microfractures indicating a dominantly brittle regime with minor strain accommodation via crystal-plasticity where dislocations are mostly emitted by the propagating fracture. These interpretations are consistent with the peak temperature conditions of the sample estimated at 302 ± 27°C, which falls within the lower range of the brittle to crystal-plastic behaviour of pyrite (260–450°C). Nanoscale structural and chemical data reveal nanoscale fluid inclusions enriched in As, O, Na and K that are linked by As-enriched dislocations. Based on these results, we propose a model of fluid hardening whereby dislocations get pinned at fluid inclusions during crystal-plastic deformation, initiating pipe diffusion of trace elements from the fluid inclusions into dislocations that leads to their stabilization and local hardening. Although additional experiments are required on other mineral phases, our initial efforts advance the understanding of the interplay between nanostructures and impurities and its impact on the rheology of geomaterials during relatively low temperature deformation.</p><p> </p>


2021 ◽  
pp. 58-85
Author(s):  
Jean-Luc Bouchez ◽  
Adolphe Nicolas

In contrast to the elastic deformation, which is reversible, usually neglected by field geologists but important for geophysicists working in seismology, ductile deformation is irreversible. This chapter is restricted to solid materials. Materials containing a melt fraction will be examined in Chapter 7. In the geological literature, ‘ductile’ is often used as a synonym for ‘plastic’. The latter is rather used, and will be used to specify deformation mechanisms that dominantly involve the action of dislocations. In contrast to brittle deformation, which by essence is discontinuous and highly localized (see Chapter 3), ductile deformation is generally continuous and affects large volumes of rock. However, ductile deformation may be concentrated into restricted rock volumes (or domains). Such localization is common in shear zones and/or when superplastic deformation mechanism is involved. Plastic deformation mechanisms naturally depend on temperature, magnitude of the applied stress, mineral nature and grain-size of the rocks. In upper parts of the crust, fluids are able to carry chemical elements over large distances and influence the deformation mechanisms. Micrographs of several microstructural types as well as deformation maps for olivine and calcite are given at the end of this chapter.


Sign in / Sign up

Export Citation Format

Share Document