Combustion method and apparatus for solid wastes using combustion residue as fuel

2002 ◽  
Vol 43 (4) ◽  
pp. 271
Author(s):  
T. Arato
Keyword(s):  
Combustion Method ◽  
Solid Wastes ◽  
Combustion Residue

scholarly journals Influence of Biomass Combustion Method on Properties of Solid Fuel Residues

2020 ◽  
Vol 328 ◽  
pp. 04001
Author(s):  
Juraj Trnka ◽  
Jozef Jandačka ◽  
Michal Holubčík
Keyword(s):  
Solid Fuel ◽  
Combustion Process ◽  
Great Influence ◽  
Combustion Method ◽  
Dust Particles ◽  
Biomass Combustion ◽  
Gaseous Emissions ◽  
Different Types ◽  
Combustion Residue ◽  
The Impact

The correct course of the combustion process has a great influence on several output parameters. In addition to the impact on the performance and efficiency of the device, the impact on the formation and properties of gaseous emissions and solid residue is particularly noticeable. The solid combustion residue, in particular in the form of ash, remains trapped as the final product after combustion in the incinerator or may be released to the outside environment. Improperly, combustion can form two negative extremes. The first extreme is the formation of too fine dust particles of ash and solid pollutants escaping into the air as dangerous emission substances for human and other organism’s health. The second is the failure to burn larger pieces of fuel or sinter them into clumps, which can subsequently damage the combustion device or reduce the efficiency of combustion. This article aims to examine the various factors influencing the impact of combustion in different types of combustion plants on the properties of the resulting solid fuel residues and further possibilities of their use and effects on the environment.

Using Solid Wastes of Tikrit City to Produce Electric Energy

2015 ◽  
Vol 1 (1) ◽  
pp. 39-48
Author(s):  
Muzher Mahdi Ibrahem ◽  
Khalid Ahmed Salih
Keyword(s):  
Electric Energy ◽  
Solid Wastes

Characteristics of Domestic Solid Wastes In The Judiciary of TuzKhurmatu, Iraq

2017 ◽  
Author(s):  
Shno Mustafa Ali ◽  
Younis Mustafa Ali ◽  
Mariwan Ridha Faris
Keyword(s):  
Solid Wastes

CLEAN UTILIZATION OF MUNICIPAL SOLID WASTES AND ALTERNATIVE FUELS DERIVED FROM IT

2020 ◽  
Vol 5 (4) ◽  
pp. 202-209
Author(s):  
Alexander Topal ◽  
◽  
Iryna Holenko ◽  
Luidmyla Haponych ◽  
◽  
...  
Keyword(s):  
Thermal Treatment ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Alternative Fuels ◽  
Solid Wastes ◽  
Municipal Solid Wastes ◽  
Local Conditions ◽  
Ecological Requirements ◽  
Clean Technologies

For the municipal solid waste (MSW) to be used in a proper way, it is necessary to implement clean technologies capable of thermal treatment of MSW and RDF in order to produce heat and electricity while meeting current ecological requirements. Nowadays, a number of technologies for MSW/RDF thermal treating are being used worldwide. Among them, the most proven technologies, applicable for industrial introduction, have been considered while analyzing their advantages/ disadvantages accounting for local conditions of Ukraine.

Combustion Driven by Fragment-based Ab Initio Molecular Dynamics Simulation

2019 ◽  
Author(s):  
Liqun Cao ◽  
Jinzhe Zeng ◽  
Mingyuan Xu ◽  
Chih-Hao Chin ◽  
Tong Zhu ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Ab Initio ◽  
Large Scale ◽  
Methane Combustion ◽  
Combustion Method ◽  
Dynamics Simulation ◽  
Ab Initio Molecular Dynamics ◽  
Computational Time ◽  
Combustion Mechanism ◽  
Daily Lives

Combustion is a kind of important reaction that affects people's daily lives and the development of aerospace. Exploring the reaction mechanism contributes to the understanding of combustion and the more efficient use of fuels. Ab initio quantum mechanical (QM) calculation is precise but limited by its computational time for large-scale systems. In order to carry out reactive molecular dynamics (MD) simulation for combustion accurately and quickly, we develop the MFCC-combustion method in this study, which calculates the interaction between atoms using QM method at the level of MN15/6-31G(d). Each molecule in systems is treated as a fragment, and when the distance between any two atoms in different molecules is greater than 3.5 Å, a new fragment involved two molecules is produced in order to consider the two-body interaction. The deviations of MFCC-combustion from full system calculations are within a few kcal/mol, and the result clearly shows that the calculated energies of the different systems using MFCC-combustion are close to converging after the distance thresholds are larger than 3.5 Å for the two-body QM interactions. The methane combustion was studied with the MFCC-combustion method to explore the combustion mechanism of the methane-oxygen system.

Synthesis of Nanoporous Ceramic Materials for the Filtration of Liquids and Gases by the Technological Combustion Method

2020 ◽  
Vol 61 (6) ◽  
pp. 725-731
Author(s):  
M. I. Alymov ◽  
V. I. Uvarov ◽  
R. D. Kapustin ◽  
A. O. Kirillov ◽  
V. E. Loryan
Keyword(s):  
Combustion Method ◽  
Ceramic Materials

New Systems for the Digestion of Solid Wastes

1992 ◽  
Vol 25 (7) ◽  
pp. 319-326 ◽  
Author(s):  
A. Wellinger ◽  
U. Baserga ◽  
K. Egger
Keyword(s):  
Dry Matter ◽  
Gas Production ◽  
Matter Content ◽  
Solid Wastes ◽  
Dry Matter Content ◽  
Feeding System ◽  
Shear Forces ◽  
Tank Reactor ◽  
Strong Shear ◽  
First Results

Two new systems for the digestion of solid wastes at thermophilic temperatures were developped and are currently being investigated at our research institute. The first system (ANCOM) was designed to process straw-rich cattle manure with a natural dry matter content of 18% to 22%. First results demonstrated a good specific gas production of 1.2 m3 biogas per m3 digester volume and day (54% methane) corresponding to a gas yield of 400 l per kg VS. A second digester system was developed to treat fruit, garden and vegetable (FGV-) waste. Because FGV-waste tends to float, a stirred tank reactor was designed in cooperation with an engineering firm. The reactor includes a distinguished new stirring system taking up strong shear forces and a hydraulic feeding system which guarantees that even during recirculation of the material, the hygenized digested substrate leaving the digester is not brought in contact with the fresh incoming material. First results measured at an HRT of 40 days demonstrated a specific gas production of 2.7 m3 per m3 fermenter and day.

Conditioning of oily sludges with municipal solid wastes incinerator fly ash

1997 ◽  
Vol 35 (8) ◽  
pp. 231-238 ◽  
Author(s):  
Tay Joo Hwa ◽  
S. Jeyaseelan
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Specific Resistance ◽  
Sewage Treatment ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Solid Wastes ◽  
Municipal Solid Wastes ◽  
Capillary Suction ◽  
Optimum Dosage

Conditioning of sludges improves dewatering characteristics and reduces the quantity of sludge to be handled. Anaerobic digested sludge collected from a sewage treatment plant contained 1.8% to 8% oil. The increase of specific resistance and capillary suction time (CST) with increasing oil content observed in these samples indicates the interference of oil in dewatering. It has been found that addition of municipal solid wastes incinerator fly ash decreases the specific resistances and capillary suction times of oily sludges rapidly up to 3% dosage. Beyond 3% fly ash, the decrease is less significant and the solids content in the sludge cake increases. This optimum dosage remains the same for sludges with varying oil contents from 1.8% to 12%. The total suspended solids of filtrate decreases with fly ash dosage but the toxic concentrations of heavy metals increases considerably. However at the optimum dosage of 3%, concentrations of heavy metals are within the limits for discharging into the sewers. The correlations of CST with the dewatering characteristics such as specific resistance, filter yield and corrected filter yield are established. These correlations can be used to obtain a quick prediction on dewaterability.

Sign in / Sign up

Export Citation Format

Share Document