An evaluation of three ultrasonic machines for predicting the body composition of live pigs of the same breed, sex and live weight

1982 ◽  
Vol 35 (2) ◽  
pp. 165-169 ◽  
Author(s):  
J. C. Alliston ◽  
A. J. Kempster ◽  
M. G. Owen ◽  
M. Ellis

ABSTRACTMeasurements of the m. longissimus and overlying fat at the last rib were taken on 39 live entire male pigs using three ultrasonic machines of differing complexity: Sonatest (simple A-mode machine), Scanogram (modified linear scanner) and Danscanner (‘real time’ scanner). Each machine had a different operator and interpreter. The pigs were from two lines of Large White, one selected for efficiency of lean-tissue gain (20 pigs) and the other a genetic control line (19 pigs). They were measured in the week prior to slaughter at approximately 90 kg live weight (91·4 (s.e. 4·4) kg).The analysis was pooled within line and the precision of carcass lean prediction at constant live weight examined for the three machines. Standard deviation of lean in carcass at equal live weight was 16·2 g/kg.A single fat thickness measurement taken by the Sonatest gave the most precise prediction (residual s.d. = 12·9 g/kg). Marginally poorer relationships were recorded for a similar measurement taken by the Scanogram (13·5 g/kg) and Danscanner (13·3 g/kg). Precision was not improved from the use of additional fat thickness measurements or, in the case of the scanning machines, from the addition of fat area over the m. longissimus or the area of the muscle itself. The results confirm that the Scanogram and Danscanner do not offer significant advantages over the simpler and cheaper Sonatest in the circumstances considered.

1981 ◽  
Vol 96 (2) ◽  
pp. 301-307 ◽  
Author(s):  
A. J. Kempster ◽  
A. Cuthbertson ◽  
D. W. Jones ◽  
M. G. Owen

SUMMARYResults are reported from four separate trials carried out to determine the precision of the Sonatest (simple A-mode ultrasonic machine) and the Scanogram (modified linear scanner) for predicting the body composition of live cattle. Cattle in the four trials differed in breed, sex and origin, and the data provided an opportunity to determine the consistency of results in different circumstances. A total of 210 cattle were involved.Fat thickness measurements (Sonatest and Scanogram) and fat and M. longissimus areas (Scanogram only) were taken at the 10th and 13th ribs and at the position of the 3rd lumbar vertebra. Their precision as predictors of carcass tissues percentages was examined when they were used in addition to live weight at evaluation.There was little consistency between trials in the positions and measurements which gave the most precise prediction. The lowest within-breed residual standard deviations of carcass lean percentage obtained with fat thickness measurements taken by Sonatest were in the range 2·5–2·7 and there was little advantage in using additional measurements in multiple regression.Fat areas taken by Scanogram were more precise predictors (within-breed residual standard deviations were close to 2·0). Precision was improved marginally to about 1·8 by using combinations of fat areas but M. longissimus areas were of little additional value.


2020 ◽  
Vol 60 ◽  
pp. 5-11
Author(s):  
I. V. Verbuch ◽  
H. V. Bratkovska

Goal. To accelerate the selection process and create populations of pigs with high level of productivity to assess the most effective modern methods breeding value of large white pigs in the SE "DG" Pasichna "Institute of Feed and Agriculture Podillya NAAS" Starosinyavsky district of Khmelnytsky region on the basis of a combined assessment of repair young for their own productivity and assessment meat qualities by MD Berezovsky and B. Tyler and the most promising method BLUP. Methods. Comparison, zootechnical and biometric analyzes. Results. The breeding value of pigs of large white breed of the breeding farm of SE "Pasichna" ICSGP NAAS "Starosinyavsky district of Khmelnytsky region by modern effective methods, namely: BLUP. According to the average indicators of the combined assessment of own productivity of animals at control fattening, taking into account their live weight on the date of birth and weaning, average daily gain, live weight and age of 100 kg, body length and fat thickness, boars significantly outweighed pigs. Compared with pigs, their live weight at the date of birth and weaning (at the age of 30 days) was higher by 0.1 and 0.81 kg. The age of reaching a live weight of 100 kg exceeded by 5.43 days, the average daily gain of 0.016 kg. Live weight and body length of pigs on the date of fat thickness measurement was greater by 4.04 kg and 1.03 cm. Lifetime fat thickness at three measurement points at the level of 6–7 thoracic vertebrae, on the buttocks and in the midpoint of the back between withers and buttocks was thinner by 0.92; 0.94 and 1.06 mm. Evaluation indices of fattening and meat qualities by growth energy and fat thickness (Ia) and average daily gain and fat thickness (Iv) in boars indicate their higher level by 2.07 and 7.67 points compared to pigs and are equal to, respectively, 95.12 ± 1.95 and 152.96 ± 2.38 points. The coefficient of variability (Cv, %) of indicators of own productivity and estimated indices of fattening and meat qualities of repair boars ranged from 1.92% (body length on the date of fat thickness measurement, cm) to 15.12% (age of live weight 100 kg, days), repair pigs – from 4.63% (body length on the date of fat thickness measurement, cm) to 28.19% (index of assessment for growth energy and fat thickness, (Ia), points). The best average values of indicators of breeding value of animals are found on the basis of modern, most promising method BLUP, because it is considered in terms of mathematics, statistics and selection is the most accurate, well-founded, has the best theoretical basis and the lowest error variance. The average value of the BLUP index (parent lines) for boars of large white breed is 101.71 ± 1.681, pigs – 96.94 ± 0.724 points. At the same time, boars outweighed pigs by 4.77 points. The most positive correlation between live weight of piglets at weaning with their body length (r = 0.16), average daily gain (r = 0.19) and fat thickness (r = 0.24), the average correlation between the indices of fattening and meat qualities according to MD Berezovsky and B. Tyler (r = 0.56) P > 0.99 and the weak correlation between live weight of piglets at weaning and the BLUR index (r = 0,21) P > 0.99. It should be noted that there are almost no correlations between the fattening and meat quality indices of pigs and the BLUP index. Conclusions. In the conditions of breeding and specialized farms for the production of commercial pork in the region, to determine the breeding value of animals for further reproduction of their own herd and sale to other breeding farms of Ukraine, to systematically assess repair young animals for their own productivity and clear qualities of pigs and the most perfect BLUP index.


1983 ◽  
Vol 101 (1) ◽  
pp. 241-248 ◽  
Author(s):  
J. P. Chadwick ◽  
A. J. Kempster

SUMMARYFat thickness measurements, taken over the M. longissimus between the 6th and 13th ribs by the automatic-recording probes, SFK Meat-Fat probe (MF), Hennessy and Chong Fat Depth Indicator (FDI) and Ulster probe (UP), and a simple ruler probe (RP), were compared with one another and a visual fat score (VSC) in terms of the precision with which carcass lean and subcutaneous fat percentages were predicted. The comparisons were made in four separate trials with RP and VSC common to all of them. A total of 182 carcasses were involved; 130 of these were probed both hot and cold. Comparisons were made among carcasses of the same weight.VSC was the best single predictor in most circumstances. Fat thickness measurements taken on the cold carcass provided a more precise prediction than those taken on the hot carcass. There was an interaction between the relative precision of the MF and RP probes and the condition of the carcass: the former generally gave the more precise prediction on cold carcasses and the latter on hot carcasses. Measurements taken by FDI tended to be better predictors than those taken by RP on both hot and cold carcasses. The use of two fat thickness measurements gave an improvement in precision over the best individual fat thickness measurements. There was also an improvement in precision in most circumstances when a fat thickness measurement was used in addition to VSC.There was little indication that specific fat measurements were particularly precise predictors when taken by specific probes, and no fat measurement was consistently the best predictor. A measurement taken 7·5 cm from the dorsal mid line at the 6th rib occurred most commonly in pairs of measurements giving the most precise prediction.


1979 ◽  
Vol 29 (2) ◽  
pp. 175-181 ◽  
Author(s):  
A. J. Kempster ◽  
A. Cuthbertson ◽  
M. G. Owen ◽  
J. C. Alliston

ABSTRACTMeasurements of the m. longissimus and overlying fat at the last rib were taken on the live pig using ultrasonic machines of differing complexity: Sonatest (simple A-mode machine), Scanogram and His Observer (modified linear scanners), and Danscanner (‘real time’ scanner). These measurements were examined as predictors of the corresponding carcass measurements and percentage lean in the carcass.Sonatest and Scanogram were compared using 143 purebred and crossbred pigs of different types. The analysis was pooled within breed-type and sex. The standard deviation for percentage lean was 3·94. Residual standard deviations for predicting percentage lean from live weight and best fat thickness were 2·72 (Sonatest) and 2·56 (Scanogram). Addition of m. longissimus depth (Sonatest) and m. longissimus area (Scanogram) reduced these to 2·69 and 2·29 respectively. The use of two or more fat measurements provided no extra precision over a single fat measurement.Scanogram and His Observer were compared using a subset of 38 pigs. Scanogram was a better predictor of percentage lean using a single fat measurement but when a combination of measurements was used, there was little difference between the machines.Scanogram and Danscanner were compared using a subset of 27 pigs. The standard deviation of percentage lean was 3·57. Residual standard deviations for predicting percentage lean from live weight, best fat depth and m. longissimus area were 2·18 (Scanogram), and 2·03 (Danscanner). Fat areas had similar predictive precision to fat thickness measurements.


1981 ◽  
Vol 33 (3) ◽  
pp. 319-324 ◽  
Author(s):  
A. J. Kempster ◽  
J. P. Chadwick ◽  
D. W. Jones ◽  
A. Cuthbertson

ABSTRACTThe Hennessy and Chong Fat Depth Indicator and the Ulster Probe automatic recording instruments developed for measuring fat thickness were tested against the optical probe for use in pig carcass classification and grading.Fat thickness measurements were taken using each probe 60 mm from the dorsal mid-line over the m. longissimus at the positions of the 3rd/4th lumbar vertebrae, 3rd/4th last ribs and last rib on a total of 110 hot carcasses covering the range of market weights in Great Britain. The standard deviation of carcass lean proportion at equal carcass weight was 35·4 g/kg.The instruments differed little in the precision of carcass lean proportion prediction: residual standard deviation (g/kg) for the multiple regression with carcass weight and the best individual fat measurement for each probe were: last rib optical probe, 22·1; last rib Ulster Probe, 22·7; and 3rd/4th last rib Fat Depth Indicator, 21/6. Residual standard deviation (g/kg) for carcass lean proportion prediction from carcass weight and all three fat measurements in multiple regression were 21·3 optical probe, 21·3 Ulster Probe and 201 Fat Depth Indicator.Similar mean fat measurements were obtained from the optical probe and Fat Depth Indicator, and for these instruments, but to a lesser extent for the Ulster Probe, the regression relationships with each other and with fat thickness measurements taken on the cut surface of the cold carcass were also similar.The differences recorded in precision are unlikely to be sufficiently important to influence the choice of one probe rather than another.


1989 ◽  
Vol 48 (1) ◽  
pp. 203-212 ◽  
Author(s):  
C. T. Whittemore ◽  
H. Yang

ABSTRACTThe physical and chemical composition of sows was determined at first mating (no. = 6), weaning the first litter (12) and 14 days after weaning the fourth litter (24). The sows were from 108 Large White/Landrace Fl hybrid gilts allocated in a factorial arrangement according to two levels of subcutaneous fatness at parturition (12 v. 22 mm P2), two levels of lactation feeding (3 v. 7 kg) and two sizes of sucking litter (six v. 10). Treatments significantly influenced the composition of dissected carcass fat and chemical lipid, but not composition of dissected lean and chemical protein. The final body protein mass of well fed sows at the termination of parity 4 was 41 kg, and the total content of gross energy (GE) in excess of 3000 MJ, with an average of 12·4 MJ GE per kg live weight; equivalent values for the less well fed sows were 33 kg and 9·4 MJ GE per kg live weight respectively. The weights of chemical lipid and protein could be predicted from the equations: lipid (kg) = -20·4 (s.e. 4·5) + 0·21 (s.e. 0·02) live weight + 1·5 (s.e. 0·2) P2; protein (kg) = -2·3 (s.e. 1·6) + 0·19 (s.e. 0·01) live weight - 0·22 (s.e. 0·07) P2. On average, sows lost 9 kg lipid and 3 kg protein in the course of the 28-day lactation; these being proportionately about 0·16 and 0·37 of the live-weight losses respectively. Maternal energy requirement for maintenance was estimated as 0·50 MJ digestible energy (DE) per kg M0·75, while the efficiency of use of DE for energy retention was 0·28.


Author(s):  
A J Kempster ◽  
J P Chadwick ◽  
D W Jones

Fat thickness measurements taken laterally over the M. longissimus in the caudal rib region normally provide a more precise prediction of carcass lean content than other measurements suitable for use in classification and grading schemes. Such measurements are currently taken using the Danish optical probe (intrascope) in the national pig carcass classification scheme operated by MLC.


1980 ◽  
Vol 95 (2) ◽  
pp. 251-259 ◽  
Author(s):  
A. S. Davies ◽  
G. Pearson ◽  
J. R. Carr

SUMMARYAn anatomical study compared the effects of sex and a twofold nutritional difference in growth rate between 20 and 100 kg live weight, on 63 entire males, castrated male and female Large White × Landrace pigs. While the effect of growth rate was significant for overall fat deposition in the carcasses of all three sexes, it was greatest for the entire male. In contrast, sex and nutritional effects on the distribution of fat and on the proportion and distribution of muscle and bone were small.


2021 ◽  
Vol 13 ◽  
pp. 126-132
Author(s):  
E. B. Soniya

Observations were made on 79 Nigerian indigenous (NI) and 24 Large White pigs.There was. a, three-month delay, in growth acceleration in NI pigs as compared with LW pigs. Growth acceleration started at 7 and 4 months for NI and LW respectively. Over all ages studied, NI differed markedly from LW in live weight, body length, height, depth and ham dimen­sions but this difference was much less between males than between females_ In NI ;boars serially slaughtered, live and carcass weights doubled between 7 and 10 months of age while dressing percent and carcass length reached peak values at 10 months. Carcass backfat measurements were higher and more consistent at the shoulder than at the loin or rump. Com­bined longitudinal and dissection studies are needed to elucidate the growth curve, the true genetic potential for growth and the body fat deposition pattern in the NI pigs.


1987 ◽  
Vol 108 (1) ◽  
pp. 39-45 ◽  
Author(s):  
A. Fortin ◽  
J. D. Wood ◽  
O. P. Whelehan

SummaryThe development and proportions of muscle, fat and bone were studied in 341 entire male and female Iron Age (European Wild Pig × Tamworth), Pietrain and Large White pigs ranging in live weight from 12 to 370 kg. The number of pigs was: Large White, 138 entire males and 112 females; Pietrain, 41 entire males and 31 females; Iron Age, eight entire males and 11 females. The breeds and sexes were compared in terms of the allometric growth coefficients of tissues (b) and of tissue weights at constant side weight and constant weight of total side bone.At the geometric mean for side weight (26·5 kg), Pietrain carcasses had the most muscle (16 kg), followed by Large White (15kg) and Iron Age (11 kg), but the least fat (6 kg). Large White and Iron Age carcasses had 7 and 12 kg of fat, respectively. Relative to side weight, the earliest maturing tissue, bone, was particularly slow growing in Iron Age pigs (b = 0·627) and relatively fast growing in Large Whites (b = 0·801). The opposite was true for fat, the latest maturing tissue, and consequently Iron Age (b = 1·345) and Large White (b = 1·164) pigs were identified as early and late maturing, respectively. Pietrains had a higher growth coefficient for fat relative to side weight (b = 1·249) and lower growth coefficient for bone (b = 0·713) than Large Whites. The difference in percentage fat between Pietrains and Large Whites decreased slightly between 65 and 120 kg live weight. In terms of tissue growth patterns, Pietrains therefore demonstrated early maturing characteristics compared with Large Whites, and it is possible that a low voluntary feed intake under ad libitum feeding conditions prevents them from expressing these characteristics in terms of percentage of fat in the side. Pietrains had a particularly high muscle:bone ratio (6·2 at the mean side weight) compared with Large White (5·2) and Iron Age pigs (5·3).The difference in carcass composition between entire males and females was breeddependent. Entire male carcasses were slightly leaner overall and had a lower muscle: bone ratio than those of females, but tissue allometric growth patterns were similar in the two sexes.


Sign in / Sign up

Export Citation Format

Share Document