Avinash–Shukla mass limit for the maximum dust mass supported against gravity by electric fields

2010 ◽  
Vol 76 (3-4) ◽  
pp. 493-500 ◽  
Author(s):  
K. AVINASH

AbstractThe existence of a new class of astrophysical objects, where gravity is balanced by the shielded electric fields associated with the electric charge on the dust, is shown. Further, a mass limit MA for the maximum dust mass that can be supported against gravitational collapse by these fields is obtained. If the total mass of the dust in the interstellar cloud MD > MA, the dust collapses, while if MD < MA, stable equilibrium may be achieved. Heuristic arguments are given to show that the physics of the mass limit is similar to the Chandrasekar's mass limit for compact objects and the similarity of these dust configurations with neutron and white dwarfs is pointed out. The effect of grain size distribution on the mass limit and strong correlation effects in the core of such objects is discussed. Possible location of these dust configurations inside interstellar clouds is pointed out.

2019 ◽  
Vol 15 (S356) ◽  
pp. 383-384
Author(s):  
Seman Abaraya ◽  
Tolu Biressa

AbstractCompact objects are of great interest in astrophysical research. There are active research interests in understanding better various aspects of formation and evolution of these objects. In this paper we addressed some problems related to the compact objects mass limit. We employed Einstein field equations (EFEs) to derive the equation of state (EoS). With the assumption of high densities and low temperature of compact sources, the derived equation of state is reduced to polytropic kind. Studying the polytropic equations we obtained similar physical implications, in agreement to previous works. Using the latest version of Mathematica-11 in our numerical analysis, we also obtained similar results except slight differences in accuracy.


2007 ◽  
Vol 128 ◽  
pp. 219-224 ◽  
Author(s):  
P.P. Kostrobiy ◽  
Bogdan M. Markovych ◽  
Yuri Suchorski

An external electrostatic field of the order of a few tens of a volt per nanometer causes significant changes in the electron density distribution near a metal surface. Because of differing electronic distributions and varying responses of electrons to the applied field for various metals, the resulting local field distribution in the close vicinity of the surface should depend on the electronic properties of the particular metal, even for flat surfaces. Field-free and field-modified electron density distributions for different metal surfaces were calculated using the functional integration method. This approach enables the exchange-correlation effects to be correctly considered and makes it possible to account for the proper field-effect for broad field ranges without using the perturbation theory. The results of calculations are compared with the field-ion microscopic observations.


1986 ◽  
Vol 116 ◽  
pp. 271-273 ◽  
Author(s):  
Hans Zinnecker

Stellar coalescence is suggested as a possible mechanism for doubling the upper stellar mass limit from ∼100M⊙ to ∼200M⊙ in a moderately dense cluster of a few hundred young massive stars (∼105 M⊙ pc−3). The merger will be between the two components of the dominant central tight binary formed in the core of the cluster by the N-body evolution. This process may occur in some giant extragalactic HII regions.


1994 ◽  
Vol 147 ◽  
pp. 443-462
Author(s):  
W.B. Hubbard

AbstractAstrophysical objects of low mass, ranging from giant planets to extreme dwarf main-sequence stars, have a number of physical characteristics in common due to properties of their equations of state. Their luminosities are low (much less than the solar luminosity L⊙) and their evolutionary timescales are typically measured in Gyr. So far there are few observational examples of these objects, although they are undoubtedly numerous in the galaxy. The lower mass limit is set by the object’s ability to retain hydrogen during accumulation (about the mass of Saturn), while the upper mass limit is set by the lifting of electron degeneracy by high internal temperature. Objects confined within this broad range, which extends up to about 0.1 M⊙, are governed by the thermodynamics of liquid metallic hydrogen. In this paper, we discuss the implications of this feature of their interior structure for their radii, interior temperatures, thermonuclear energy generation rates, and luminosities. We conclude with a brief assessment of the confrontation between observations and theory in galactic clusters and in the solar system.


Molecules ◽  
2019 ◽  
Vol 24 (22) ◽  
pp. 4083
Author(s):  
Andrea Ruiu ◽  
Mireille Vonlanthen ◽  
Sandra M. Rojas-Montoya ◽  
Israel González-Méndez ◽  
Ernesto Rivera

A new class of pyrene-based dendrimers, characterized by the presence of a 1,4,7,10-Tetraazacyclododecane (cyclen) unit as the core, was studied by SSF (steady-state fluorescence) and SPC (single-photon counting fluorescence). The photophysical behavior of these dendrimers was studied in THF, DMF and DMSO solution. The typical signals for pyrene-labeled molecules were recorded in each solvent, showing the representative fluorescence spectra: the corresponding emissions of monomer and excimer of the pyrene chromophore are observed. Unexpectedly, the typical quenching of tertiary amine on the pyrene emission was not observed in these dendrimers. Quenching studies were performed by adding up to 3 equivalents of trifluoroacetic acid (TFA). To our knowledge, this is the first report of pyrene’s unquenching behavior by a tertiary amine.


2010 ◽  
Vol 129-131 ◽  
pp. 1366-1371 ◽  
Author(s):  
S.R. Ning ◽  
Jun Gao ◽  
Y.G. Wang

During the past decade a new class of magnetic materials-amorphous metals, has been under development. This material offers the potential of reducing the core losses of motors dramatically due to its excellent magnetic performance. Thus, the incentive is tremendous to develop cost-competitive motors utilizing amorphous alloys. However, there were some deficiency of a relatively high brittleness and a low stacking factor, which makes it difficult to stamp or cut the material to the shapes that motors required. This paper will briefly review some of the important process technical of magnetic amorphous alloys cores and will describe the results of applying this material in all kind of test motors.


Author(s):  
V.E. Dreyzin ◽  
◽  
Mohammed Al Kadhimi Ali Noori ◽  
V.E. Bondyrev ◽  
◽  
...  

In this paper, we propose a sensor for the density and composition of the upper atmosphere (ionosphere), designed for installation on nanosatellites. The relevance and existing problems of direct instrumental studies of the ionosphere at altitudes of 150-500 km are shown. Of the existing types of vacuum meters, the most suitable for autonomous operation at these altitudes are ionization vacuum meters with inverse magnetron primary converters with a cold cathode. However, the existing industrial types of such vacuum meters are unsuitable for operation in the ionosphere due to high concentration of charged particles in the air, resulting in large distortions of the readings. In addition, they have large weight and size characteristics and energy consumption, which exclude the possibility of their installation on nanosatellites. To solve these problems, a mathematical model of the electrophysical processes, occurring in the core of such a converter, was developed which significantly reduced its weight and size characteristics and energy consumption. And to eliminate the influence of charged particles, it is equipped with an electron-ion trap, which additionally made it possible to measure the concentration of electrons and ions in the environment. The design of such a combined converter is described, and calculations of the electric and magnetic fields in the core of the vacuum gauge converter and the electric fields in the interelectrode space of the trap are performed. A method for calculating the current values of such a combined converter has been developed, which makes it possible to estimate the required measurement ranges of the sensor measuring channels. The results obtained allow us to proceed with its experimental design.


Author(s):  
D. Stuerga ◽  
H. Renaudin ◽  
F. Henri ◽  
M. Delmotte ◽  
M. Lallemant
Keyword(s):  

2019 ◽  
Vol 632 ◽  
pp. A90 ◽  
Author(s):  
S. Charpinet ◽  
P. Brassard ◽  
G. Fontaine ◽  
V. Van Grootel ◽  
W. Zong ◽  
...  

Context. The TESS satellite was launched in 2018 to perform high-precision photometry from space over almost the whole sky in a search for exoplanets orbiting bright stars. This instrument has opened new opportunities to study variable hot subdwarfs, white dwarfs, and related compact objects. Targets of interest include white dwarf and hot subdwarf pulsators, both carrying high potential for asteroseismology. Aims. We present the discovery and detailed asteroseismic analysis of a new g-mode hot B subdwarf (sdB) pulsator, EC 21494−7018 (TIC 278659026), monitored in TESS first sector using 120-s cadence. Methods. The TESS light curve was analyzed with standard prewhitening techniques, followed by forward modeling using our latest generation of sdB models developed for asteroseismic investigations. By simultaneously best-matching all the observed frequencies with those computed from models, we identified the pulsation modes detected and, more importantly, we determined the global parameters and structural configuration of the star. Results. The light curve analysis reveals that EC 21494−7018 is a sdB pulsator counting up to 20 frequencies associated with independent g-modes. The seismic analysis singles out an optimal model solution in full agreement with independent measurements provided by spectroscopy (atmospheric parameters derived from model atmospheres) and astrometry (distance evaluated from Gaia DR2 trigonometric parallax). Several key parameters of the star are derived. Its mass (0.391 ± 0.009 M⊙) is significantly lower than the typical mass of sdB stars and suggests that its progenitor has not undergone the He-core flash; therefore this progenitor could originate from a massive (≳2 M⊙) red giant, which is an alternative channel for the formation of sdBs. Other derived parameters include the H-rich envelope mass (0.0037 ± 0.0010 M⊙), radius (0.1694 ± 0.0081 R⊙), and luminosity (8.2 ± 1.1 L⊙). The optimal model fit has a double-layered He+H composition profile, which we interpret as an incomplete but ongoing process of gravitational settling of helium at the bottom of a thick H-rich envelope. Moreover, the derived properties of the core indicate that EC 21494−7018 has burnt ∼43% (in mass) of its central helium and possesses a relatively large mixed core (Mcore = 0.198 ± 0.010 M⊙), in line with trends already uncovered from other g-mode sdB pulsators analyzed with asteroseismology. Finally, we obtain for the first time an estimate of the amount of oxygen (in mass; X(O)core = 0.16+0.13−0.05) produced at this stage of evolution by an helium-burning core. This result, along with the core-size estimate, is an interesting constraint that may help to narrow down the still uncertain 12C(α, γ)16O nuclear reaction rate.


Sign in / Sign up

Export Citation Format

Share Document