Word Classes in Vietnamese

1956 ◽  
Vol 18 (3) ◽  
pp. 534-544 ◽  
Author(s):  
P. J. Honey
Keyword(s):  
Phonological Structure ◽  
Word Classes ◽  
Set Up ◽  
Level Of Analysis

The phonological structure of the Vietnamese word as used in the system of Vietnamese word classes established in this paper may be stated in terms of syllables. The syllable is denned as the element of Vietnamese having the prosody of one, but not more than one, of the system of six tones set up for the analysis of the Vietnamese language at the phonological level. The syllabic unit is used to refer to an element of text at the grammatical level of analysis corresponding to the syllable at the phonological level. A study of Vietnamese texts enables the following statements to be made:

scholarly journals The ‘nouniness’ of attributive adjectives and ‘verbiness’ of predicative adjectives: evidence from phonology

2020 ◽  
pp. 1-23
Author(s):  
WILLEM B. HOLLMANN
Keyword(s):  
American English ◽  
Psycholinguistic Research ◽  
Substantial Body ◽  
Phonological Structure ◽  
Word Classes ◽  
Entire Word ◽  
Radical Construction ◽  
Overlapping Classes ◽  
Theoretical Issues ◽  
Attributive Adjectives

This article investigates prototypically attributive versus predicative adjectives in English in terms of the phonological properties that have been associated especially with nouns versus verbs in a substantial body of psycholinguistic research (e.g. Kelly 1992) – often ignored in theoretical linguistic work on word classes. Inspired by Berg's (2000, 2009) ‘cross-level harmony constraint’, the hypothesis I test is that prototypically attributive adjectives not only align more with nouns than with verbs syntactically, semantically and pragmatically, but also phonologically – and likewise for prototypically predicative adjectives and verbs. I analyse the phonological structure of frequent adjectives from the Corpus of Contemporary American English (COCA), and show that the data do indeed support the hypothesis. Berg's ‘cross-level harmony constraint’ may thus apply not only to the entire word classes noun, verb and adjective, but also to these two adjectival subclasses. I discuss several theoretical issues that emerge. The facts are most readily accommodated in a usage-based model, such as Radical Construction Grammar (Croft 2001), where these adjectives are seen as forming two distinct but overlapping classes. Drawing also on recent research by Boyd & Goldberg (2011) and Hao (2015), I explore the possible nature and emergence of these classes in some detail.

scholarly journals Individualism-Collectivism as the Dimension Distinguishing the Western from the Eastern Culture

2018 ◽  
Vol 6 (7) ◽  
pp. 31 ◽  
Author(s):  
DaYeon Her ◽  
HyunGyung Joo
Keyword(s):  
Ethnic Groups ◽  
Qualitative Approach ◽  
Future Research ◽  
The West ◽  
Cultural Products ◽  
Eastern Culture ◽  
Social Ecological ◽  
Set Up ◽  
Social Ecological Variables ◽  
Level Of Analysis

Individualism (IND)-collectivism (COL) has been the most popular dimension separating the West from the East. As the recent findings relating to IND-COL by national and ethnic groups become divergent, however, some investigators are challenging IND-COL as the most representative framework dividing into the West and the East. For this reason, focusing on some issues that are supposed to cause inconsistent findings regarding IND-COL, it requires making IND-COL investigations examined and, in turn, elaborated. In the context of supporting the elaboration, this review tries to provide some suggestions as follows. First, it is necessary to analyze and set up the concept of IND-COL precisely. Second, cultural psychologists need to elaborate instruments and introduce social-ecological variables, cultural products, and qualitative approach. Third, there need to diversify the sampling target. Fourth, future research requires specifying the sampling target more specifically. Fifth, IND-COL studies need to solve the issue due to the level of analysis.

Convergence in Policy Outcomes: Social Security Systems in Perspective

1994 ◽  
Vol 14 (2) ◽  
pp. 147-174 ◽  
Author(s):  
Einar Overbye
Keyword(s):  
Social Security ◽  
Final Section ◽  
Policy Outcomes ◽  
Industrialized Countries ◽  
Social Security Systems ◽  
Security Systems ◽  
Anglo American ◽  
Set Up ◽  
Level Of Analysis ◽  
The Welfare State

ABSTRACTA central question in the welfare state debate has been whether or not social policies in industrialized countries converge. Originally linked to the logic of industrialism perspective, this idea has been criticized by researchers focusing on differences in timing and differences in the institutional set up of social security schemes across countries. Nonetheless, I argue that social security arrangements in European as well as Anglo-American countries may gradually become more similar. Using pension politics as the primary example, the article locates similar social and political mechanisms at work in different countries, pushing toward convergence in policy outcomes, despite persistent variation in institutional arrangements. In the final section of the article, I extract a model from the analysis, aimed at explaining political change while maintaining a connection between the micro and macro level of analysis.

The Effects of Drying Techniques on Clay-Rich Soil Texture

1974 ◽  
Vol 32 ◽  
pp. 466-467
Author(s):  
T. G. Naymik
Keyword(s):  
Critical Point ◽  
Liquid Nitrogen ◽  
Liquid Nitrogen Temperature ◽  
Drying Methods ◽  
Air Drying ◽  
Freeze Dried ◽  
Critical Point Drying ◽  
Set Up ◽  
The Relationship ◽  
Quartz Grains

Three techniques were incorporated for drying clay-rich specimens: air-drying, freeze-drying and critical point drying. In air-drying, the specimens were set out for several days to dry or were placed in an oven (80°F) for several hours. The freeze-dried specimens were frozen by immersion in liquid nitrogen or in isopentane at near liquid nitrogen temperature and then were immediately placed in the freeze-dry vacuum chamber. The critical point specimens were molded in agar immediately after sampling. When the agar had set up the dehydration series, water-alcohol-amyl acetate-CO2 was carried out. The objectives were to compare the fabric plasmas (clays and precipitates), fabricskeletons (quartz grains) and the relationship between them for each drying technique. The three drying methods are not only applicable to the study of treated soils, but can be incorporated into all SEM clay soil studies.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

Eels Under Standing Wave Conditions

1982 ◽  
Vol 40 ◽  
pp. 492-495
Author(s):  
O.L. Krivanek ◽  
J. TaftØ
Keyword(s):  
Standing Wave ◽  
Wave Conditions ◽  
Set Up ◽  
A Site ◽  
Complex Crystal

It is well known that a standing electron wavefield can be set up in a crystal such that its intensity peaks at the atomic sites or between the sites or in the case of more complex crystal, at one or another type of a site. The effect is usually referred to as channelling but this term is not entirely appropriate; by analogy with the more established particle channelling, electrons would have to be described as channelling either through the channels or through the channel walls, depending on the diffraction conditions.

Low-Loss Images in a Stem/Tem Microscope

1976 ◽  
Vol 34 ◽  
pp. 496-497 ◽  
Author(s):  
David C. Joy ◽  
Dennis M. Maher
Keyword(s):  
High Resolution ◽  
Surface Topography ◽  
Beam Direction ◽  
Low Loss ◽  
Specimen Holder ◽  
Glancing Angle ◽  
High Resolution Images ◽  
Set Up ◽  
Conventional Manner ◽  
Objective Type

High-resolution images of the surface topography of solid specimens can be obtained using the low-loss technique of Wells. If the specimen is placed inside a lens of the condenser/objective type, then it has been shown that the lens itself can be used to collect and filter the low-loss electrons. Since the probeforming lenses in TEM instruments fitted with scanning attachments are of this type, low-loss imaging should be possible.High-resolution, low-loss images have been obtained in a JEOL JEM 100B fitted with a scanning attachment and a thermal, fieldemission gun. No modifications were made to the instrument, but a wedge-shaped, specimen holder was made to fit the side-entry, goniometer stage. Thus the specimen is oriented initially at a glancing angle of about 30° to the beam direction. The instrument is set up in the conventional manner for STEM operation with all the lenses, including the projector, excited.

UHV-TEM studies of laser-induced damage

1991 ◽  
Vol 49 ◽  
pp. 632-633
Author(s):  
T.S. Savage ◽  
R. Ai ◽  
D. Dunn ◽  
L.D. Marks
Keyword(s):  
Surface Science ◽  
Rapid Heating ◽  
Local Heating ◽  
Routine Practice ◽  
Transmission Electron ◽  
Northwestern University ◽  
Laser Induced Damage ◽  
Set Up ◽  
Focusing Lens ◽  
Diffusion Of Impurities

The use of lasers for surface annealing, heating and/or damage has become a routine practice in the study of materials. Lasers have been closely looked at as an annealing technique for silicon and other semiconductors. They allow for local heating from a beam which can be focused and tuned to different wavelengths for specific tasks. Pulsed dye lasers allow for short, quick bursts which can allow the sample to be rapidly heated and quenched. This short, rapid heating period may be important for cases where diffusion of impurities or dopants may not be desirable.At Northwestern University, a Candela SLL - 250 pulsed dye laser, with a maximum power of 1 Joule/pulse over 350 - 400 nanoseconds, has been set up in conjunction with a Hitachi UHV-H9000 transmission electron microscope. The laser beam is introduced into the surface science chamber through a series of mirrors, a focusing lens and a six inch quartz window.

A simple way for producing holographic filters suitable for image improvement

1978 ◽  
Vol 36 (1) ◽  
pp. 226-227
Author(s):  
K.-H. Herrmann ◽  
E. Reuber ◽  
P. Schiske
Keyword(s):  
Transfer Functions ◽  
Diffraction Order ◽  
Lateral Position ◽  
Simple Method ◽  
Spatial Frequencies ◽  
Resolution Electron ◽  
Wiener Filters ◽  
Image Improvement ◽  
Optical Reconstruction ◽  
Set Up

Aposteriori deblurring of high resolution electron micrographs of weak phase objects can be performed by holographic filters [1,2] which are arranged in the Fourier domain of a light-optical reconstruction set-up. According to the diffraction efficiency and the lateral position of the grating structure, the filters permit adjustment of the amplitudes and phases of the spatial frequencies in the image which is obtained in the first diffraction order.In the case of bright field imaging with axial illumination, the Contrast Transfer Functions (CTF) are oscillating, but real. For different imageforming conditions and several signal-to-noise ratios an extensive set of Wiener-filters should be available. A simple method of producing such filters by only photographic and mechanical means will be described here.A transparent master grating with 6.25 lines/mm and 160 mm diameter was produced by a high precision computer plotter. It is photographed through a rotating mask, plotted by a standard plotter.

3-D optical transfer in excitation field synthesis microscopes

1995 ◽  
Vol 53 ◽  
pp. 64-65
Author(s):  
Vijay Krishnamurthi ◽  
Brent Bailey ◽  
Frederick Lanni
Keyword(s):  
Standing Wave ◽  
Spatial Information ◽  
3D Structure ◽  
Complete Recovery ◽  
Weighting Factor ◽  
Optical Transfer Function ◽  
Excitation Field ◽  
Optical Transfer ◽  
Set Up ◽  
Focus Plane

Excitation field synthesis (EFS) refers to the use of an interference optical system in a direct-imaging microscope to improve 3D resolution by axially-selective excitation of fluorescence within a specimen. The excitation field can be thought of as a weighting factor for the point-spread function (PSF) of the microscope, so that the optical transfer function (OTF) gets expanded by convolution with the Fourier transform of the field intensity. The simplest EFS system is the standing-wave fluorescence microscope, in which an axially-periodic excitation field is set up through the specimen by interference of a pair of collimated, coherent, s-polarized beams that enter the specimen from opposite sides at matching angles. In this case, spatial information about the object is recovered in the central OTF passband, plus two symmetric, axially-shifted sidebands. Gaps between these bands represent "lost" information about the 3D structure of the object. Because the sideband shift is equal to the spatial frequency of the standing-wave (SW) field, more complete recovery of information is possible by superposition of fields having different periods. When all of the fields have an antinode at a common plane (set to be coincident with the in-focus plane), the "synthesized" field is peaked in a narrow infocus zone.

Sign in / Sign up

Export Citation Format

Share Document