scholarly journals Tubule density at different sample sites around the Stratum medium of horse hoof horn

2004 ◽  
Vol 32 ◽  
pp. 173-175
Author(s):  
L Hopegood ◽  
D Abraham ◽  
C Shervey
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Unit Area ◽  
Microscopic Analysis ◽  
Grid Method ◽  
Significant Difference ◽  
Novel Method ◽  
Resistance To Wear ◽  
Equine Hoof

Microscopic analysis shows that equine hoof wall is composed of distinct phases of tubular and intertubular horn. The tubule density (TD) of hoof horn is found by ascertaining the number of tubules per unit area and is believed to relate to mechanical properties, resistance to wear, “quality”, hardness and moisture content. The straight grid previously used to ascertain the TD of hoof horn may omit certain tubules on both the inner and outer hoof wall as the wall itself is curved. This present study examined whether there was a significant difference in results for TD between using the conventional straight grid method and a novel method using a curved grid. TD was also compared across three sample sites. An analysis of TD from four equal sections (zones) across the hoof wall was also carried out.The left fore feet of 10 randomly selected slaughterhouse horses and ponies were used to provide hoof samples.

scholarly journals Effect of age and height position on physical and mechanical properties of rubber wood (Hevea brasiliensis) of Bangladesh

2015 ◽  
Vol 49 (2) ◽  
pp. 79-84
Author(s):  
MSM Majumdar ◽  
AK Das ◽  
MI Shams ◽  
MQ Chowdhury
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Hevea Brasiliensis ◽  
Physical And Mechanical Properties ◽  
Strength Properties ◽  
Age Group ◽  
Age Classes ◽  
Age Class ◽  
Rubber Wood ◽  
Significant Difference

The physical and mechanical properties of rubber (Hevea brasiliensis) wood of Bangladesh of 20, 25 and 30-year age groups were studied. The moisture content of rubber wood was 63% and volumetric shrinkage was 7.43%. The green density and air-dry (12% moisture content) density of rubber wood from 30 years age class was 570 and 590 l.c./m3. Significant difference in moisture content, shrinkage and density was found among the different age classes and height positions. However, longitudinal shrinkage did not vary among the age classes. The MOE and MOR values (air dried) of rubber wood from 30 years age class was 9200 and 65.33 MPa. In most conditions, significant difference with age class and height positions was observed for mechanical properties. The maximum values were found at the bottom position of 30 years age group. On the other hand, the lowest values were observed in the top position of 20 years age group. The strength properties were lower than teak (Tectona grandis), but some strength properties were higher than mahogany (Switenia macrophylla). DOI: http://dx.doi.org/10.3329/bjsir.v49i2.22000 Bangladesh J. Sci. Ind. Res. 49(2), 79-84, 2014

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Gliricidia Sepium ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G. sepium at three intervals according to age groups ( three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years ofage as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

BERYLCO 25S

Alloy Digest ◽  
1952 ◽  
Vol 1 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Good Resistance ◽  
Subzero Temperatures ◽  
Endurance Strength ◽  
Wear And Corrosion ◽  
Resistance To Wear

Abstract Berylco 25S alloy is the high-performance beryllium-copper spring material of 2 percent nominal beryllium content. It responds to precipitation-hardening for maximum mechanical properties. It has high elastic and endurance strength, good electrical and thermal conductivity, excellent resistance to wear and corrosion, high corrosion-fatigue strength, good resistance to moderately elevated temperatures, and no embrittlement or loss of normal ductility at subzero temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-3. Producer or source: Beryllium Corporation.

scholarly journals Symmetric Nature of Stress Distribution in the Elastic-Plastic Range of Pinus L. Pine Wood Samples Determined Experimentally and Using the Finite Element Method (FEM)

Symmetry ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 39
Author(s):  
Łukasz Warguła ◽  
Dominik Wojtkowiak ◽  
Mateusz Kukla ◽  
Krzysztof Talaśka
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Stress Distribution ◽  
Moisture Content ◽  
Tool Geometry ◽  
Wood Fibers ◽  
Data Set ◽  
Plastic Deformations ◽  
Pine Wood ◽  
Elastic Plastic

This article presents the results of experimental research on the mechanical properties of pine wood (Pinus L. Sp. Pl. 1000. 1753). In the course of the research process, stress-strain curves were determined for cases of tensile, compression and shear of standardized shapes samples. The collected data set was used to determine several material constants such as: modulus of elasticity, shear modulus or yield point. The aim of the research was to determine the material properties necessary to develop the model used in the finite element analysis (FEM), which demonstrates the symmetrical nature of the stress distribution in the sample. This model will be used to analyze the process of grinding wood base materials in terms of the peak cutting force estimation and the tool geometry influence determination. The main purpose of the developed model will be to determine the maximum stress value necessary to estimate the destructive force for the tested wood sample. The tests were carried out for timber of around 8.74% and 19.9% moisture content (MC). Significant differences were found between the mechanical properties of wood depending on moisture content and the direction of the applied force depending on the arrangement of wood fibers. Unlike other studies in the literature, this one relates to all three stress states (tensile, compression and shear) in all significant directions (anatomical). To verify the usability of the determined mechanical parameters of wood, all three strength tests (tensile, compression and shear) were mapped in the FEM analysis. The accuracy of the model in determining the maximum destructive force of the material is equal to the average 8% (for tensile testing 14%, compression 2.5%, shear 6.5%), while the average coverage of the FEM characteristic with the results of the strength test in the field of elastic-plastic deformations with the adopted ±15% error overlap on average by about 77%. The analyses were performed in the ABAQUS/Standard 2020 program in the field of elastic-plastic deformations. Research with the use of numerical models after extension with a damage model will enable the design of energy-saving and durable grinding machines.

Novel Method to Improve the Microstructure and Mechanical Properties of 45 Steel

2021 ◽  
Author(s):  
Tao Gu ◽  
Shuaixin Zhang ◽  
Yuhong Zhao ◽  
Yurong Yang ◽  
Huafeng Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Microstructure And Mechanical Properties ◽  
Novel Method

scholarly journals Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1616
Author(s):  
Vincenzo Titone ◽  
Antonio Correnti ◽  
Francesco Paolo La Mantia
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Moisture Content ◽  
Mechanical Testing ◽  
Hydrolytic Degradation ◽  
Slight Reduction ◽  
Biodegradable Polyester ◽  
Molding Process ◽  
Elongation At Break ◽  
Effect Of Moisture

This work is focused on the influence of moisture content on the processing and mechanical properties of a biodegradable polyester used for applications in injection molding. The pellets of the biodegradable polyester were exposed under different relative humidity conditions at a constant temperature before being compression molded. The compression-molded specimens were again placed under the above conditions before the mechanical testing. With all these samples, it is possible to determine the effect of moisture content on the processing and mechanical properties separately, as well as the combined effect of moisture content on the mechanical properties. The results obtained showed that the amount of absorbed water—both before processing and before mechanical testing—causes an increase in elongation at break and a slight reduction of the elastic modulus and tensile strength. These changes have been associated with possible hydrolytic degradation during the compression molding process and, in particular, with the plasticizing action of the moisture absorbed by the specimens.

scholarly journals Comparison of Mechanical Properties of PMMA Disks for Digitally Designed Dentures

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1745
Author(s):  
Tamaki Hada ◽  
Manabu Kanazawa ◽  
Maiko Iwaki ◽  
Awutsadaporn Katheng ◽  
Shunsuke Minakuchi
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Water Sorption ◽  
Water Solubility ◽  
Flexural Modulus ◽  
Manufacturing Method ◽  
Heat Curing ◽  
Significant Difference ◽  
Cad Cam ◽  
Curing Method

In this study, the physical properties of a custom block manufactured using a self-polymerizing resin (Custom-block), the commercially available CAD/CAM PMMA disk (PMMA-disk), and a heat-polymerizing resin (Conventional PMMA) were evaluated via three different tests. The Custom-block was polymerized by pouring the self-polymerizing resin into a special tray, and Conventional PMMA was polymerized with a heat-curing method, according to the manufacturer’s recommended procedure. The specimens of each group were subjected to three-point bending, water sorption and solubility, and staining tests. The results showed that the materials met the requirements of the ISO standards in all tests, except for the staining tests. The highest flexural strength was exhibited by the PMMA-disk, followed by the Custom-block and the Conventional PMMA, and a significant difference was observed in the flexural strengths of all the materials (p < 0.001). The Custom-block showed a significantly higher flexural modulus and water solubility. The water sorption and discoloration of the Custom-block were significantly higher than those of the PMMA-disk, but not significantly different from those of the Conventional PMMA. In conclusion, the mechanical properties of the three materials differed depending on the manufacturing method, which considerably affected their flexural strength, flexural modulus, water sorption and solubility, and discoloration.

Investigation on the mechanical properties of press-hardened boron steel sheets using the conductive heating technique

2020 ◽  
Vol 234 (8) ◽  
pp. 1084-1098
Author(s):  
O Kocar ◽  
H Livatyalı
Keyword(s):  
Mechanical Properties ◽  
High Speed ◽  
Boron Steel ◽  
Fast Heating ◽  
Heating Method ◽  
Conductive Heating ◽  
Press Hardening ◽  
High Speed Impact ◽  
Significant Difference ◽  
Structural Parts

An aluminized 22MnB5 (Boron) steel sheet, used for structural parts in the automotive industry, was subjected to press-hardening followed by austenitizing, both in a conventional furnace and via the conductive (electric resistance) heating method, an innovative technique based on the Joule’s principle for fast heating of the sheet metal. Conductive heating presents a number of advantages over the in-furnace heating method. These include a more efficient use of energy, as well as the requirement of less time and space for heating, thus lowering costs. After press-hardening was performed using both methods, the microstructural and mechanical characterizations of both specimens were examined for optical microscopy, hardness, tensile strength, and high-speed impact tests. The results showed that the press-hardening process transformed the ferritic–pearlitic microstructure in the as-received state into martensite after die quenching and caused a substantial increase in hardness and strength at the expense of ductility and impact toughness. On the other hand, no significant difference was observed in either the microstructure or mechanical properties with respect to the heating method used. The results obtained in the present investigation concur with the findings of current literature.

Sign in / Sign up

Export Citation Format

Share Document