Comparative local economic benefits of conventional and alternative cropping systems

1989 ◽  
Vol 4 (2) ◽  
pp. 75-83 ◽  
Author(s):  
William Lockeretz
Keyword(s):  
Cover Crops ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Economic Benefits ◽  
Local Economy ◽  
Economic Life ◽  
High Input ◽  
Corn Production ◽  
Productive Potential

AbstractI reexamined five previously published studies that compared the economics of high input conventional crop production systems in various regions to the economics of lower input alternatives that use green manures, cover crops, and more diversified rotations, but no inorganic fertilizers and little or no synthetic pesticides. The original analyses were extended to include estimates of each production system's contribution to the local economy, both directly through farmers' payments for labor and interest, and indirectly through the payrolls and profits of enterprises serving farmers. A similar comparison was also made for high input irrigated and lower input nonirrigated corn production. On a per acre basis, the high input systems' local economic benefits were equal to or greater than those of the lower input systems. However, they were lower as a fraction of total value of production in all but one case, since production was always higher for the higher input systems. Correspondingly, with all but one of the higher input systems, a greater portion of the value of production left the local economy to pay for purchased inputs. This becomes significant if the production system is not sustainable, so that the total productive potential of the area's agricultural resources is finite when integrated over their entire economic life. In such circumstances, the results imply that under the conventional system the local economy will capture a smaller share of the total productive value of those resources.

scholarly journals Impact of Cover Crops on the Soil Microbiome of Tree Crops

2020 ◽  
Vol 8 (3) ◽  
pp. 328 ◽  
Author(s):  
Antonio Castellano-Hinojosa ◽  
Sarah L. Strauss
Keyword(s):  
Cover Crops ◽  
Sustainable Management ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Soil Nutrient ◽  
Conventional Tillage ◽  
Soil Microbiome ◽  
Nitrogen And Phosphorus ◽  
Tree Crops

Increased concerns associated with interactions between herbicides, inorganic fertilizers, soil nutrient availability, and plant phytotoxicity in perennial tree crop production systems have renewed interest in the use of cover crops in the inter-row middles or between trees as an alternative sustainable management strategy for these systems. Although interactions between the soil microbiome and cover crops have been examined for annual cropping systems, there are critical differences in management and growth in perennial cropping systems that can influence the soil microbiome and, therefore, the response to cover crops. Here, we discuss the importance of cover crops in tree cropping systems using multispecies cover crop mixtures and minimum tillage and no-tillage to not only enhance the soil microbiome but also carbon, nitrogen, and phosphorus cycling compared to monocropping, conventional tillage, and inorganic fertilization. We also identify potentially important taxa and research gaps that need to be addressed to facilitate assessments of the relationships between cover crops, soil microbes, and the health of tree crops. Additional evaluations of the interactions between the soil microbiome, cover crops, nutrient cycling, and tree performance will allow for more effective and sustainable management of perennial cropping systems.

Movement and Germination of Weed Seeds in Ridge-Till Crop Production Systems

Weed Science ◽  
1988 ◽  
Vol 36 (1) ◽  
pp. 56-59 ◽  
Author(s):  
Frank Forcella ◽  
Michael J. Lindstrom
Keyword(s):  
Zea Mays ◽  
Glycine Max ◽  
Crop Yield ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Yield Losses ◽  
Corn Production ◽  
Continuous Corn ◽  
Weed Seeds

The dynamics of buried weed seeds in ridge-tilled corn (Zea maysL.) and soybeans [Glycine max(L.) Merr.] were studied in Minnesota. Soils subjected to continuous corn production harbored at least twice as many buried weed seeds as soils under corn/soybean rotations. Truncation of ridges at the time of crop sowing removed 31 to 37% of the buried weed seeds from ridges of continuous corn, and 80 to 100% of those from ridges of the corn/soybean rotations. From 14 to 36% of weed seeds originally in ridges were lost through germination either on the ridge or in the furrow. Ridging soil at layby stimulated germination of numerous weed seeds. The resulting population of small weeds eventually produced up to 1000 seeds/m2in continuous corn but only about 100 seeds/m2in corn/soybean rotations, thoroughly replenishing the soil seed reserve in both cropping systems. After 7 to 8 yr of good to excellent weed control with herbicides, crop yield losses in the absence of herbicides were 10 to 27% in continuous corn, and 0% for corn and 6 to 10% for soybeans in corn/soybean rotations.

Cover Crops for San Joaquin Valley Row Crop Production Systems

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 494e-494
Author(s):  
J.P. Mitchell ◽  
T.S. Prather ◽  
K.J. Hembree ◽  
P.B. Goodell ◽  
D.M. May ◽  
...  
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Late Summer ◽  
Dry Weight ◽  
San Joaquin Valley ◽  
Crop Species ◽  
Windows Of Opportunity

There is currently considerable interest in the use of cover crops to improve the productivity and sustainability of agroecosystems in California. Adoption of cover crops into San Joaquin Valley row cropping systems has been slow, however, largely because growth characteristics of potentially suitable cover crop species and mixtures have not been identified for the tight windows of opportunity that exist within the region's intensive rotations, and because of uncertainy about the amount of water required to grow a cover crop. In 1995–96 and 1997–98, we screened 15 potential late-summer and winter cover crop species and mixtures planted monthly from 1 Aug. through 1 Nov. and harvested at 30-day intervals through March. In 1995–96, Sorghum-sudan produced 36,543 lb dry matter/acre and was the highest-producing late-summer species in a December-harvested August planting. Triticale and Merced rye were highest-producing winter species, yielding 19,277 and 10,155 lb dry weight/acre, respectively, during the 5-month period from October to March.

scholarly journals Precision agriculture and geospatial techniques for sustainable disease control

2021 ◽  
Author(s):  
Daniel P. Roberts ◽  
Nicholas M. Short ◽  
James Sill ◽  
Dilip K. Lakshman ◽  
Xiaojia Hu ◽  
...  
Keyword(s):  
Big Data ◽  
Disease Control ◽  
Crop Production ◽  
Plant Disease ◽  
Production Systems ◽  
Cropping Systems ◽  
Data Driven ◽  
Agricultural Community ◽  
Plant Disease Control ◽  
Crop Germplasm

AbstractThe agricultural community is confronted with dual challenges; increasing production of nutritionally dense food and decreasing the impacts of these crop production systems on the land, water, and climate. Control of plant pathogens will figure prominently in meeting these challenges as plant diseases cause significant yield and economic losses to crops responsible for feeding a large portion of the world population. New approaches and technologies to enhance sustainability of crop production systems and, importantly, plant disease control need to be developed and adopted. By leveraging advanced geoinformatic techniques, advances in computing and sensing infrastructure (e.g., cloud-based, big data-driven applications) will aid in the monitoring and management of pesticides and biologicals, such as cover crops and beneficial microbes, to reduce the impact of plant disease control and cropping systems on the environment. This includes geospatial tools being developed to aid the farmer in managing cropping system and disease management strategies that are more sustainable but increasingly complex. Geoinformatics and cloud-based, big data-driven applications are also being enlisted to speed up crop germplasm improvement; crop germplasm that has enhanced tolerance to pathogens and abiotic stress and is in tune with different cropping systems and environmental conditions is needed. Finally, advanced geoinformatic techniques and advances in computing infrastructure allow a more collaborative framework amongst scientists, policymakers, and the agricultural community to speed the development, transfer, and adoption of these sustainable technologies.

scholarly journals iHSD Mill Efficacy on the Seeds of Australian Cropping System Weeds

2017 ◽  
Vol 32 (2) ◽  
pp. 103-108 ◽  
Author(s):  
Michael J. Walsh ◽  
John C. Broster ◽  
Stephen B. Powles
Keyword(s):  
Moisture Content ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Cropping System ◽  
High Efficacy ◽  
Weed Seed ◽  
Rigid Ryegrass ◽  
Mill Speed ◽  
Wheat Chaff

AbstractIn Australia, widespread evolution of multi-resistant weed populations has driven the development and adoption of harvest weed seed control (HWSC). However, due to incompatibility of commonly used HWSC systems with highly productive conservation cropping systems, better HWSC systems are in demand. This study aimed to evaluate the efficacy of the integrated Harrington Seed Destructor (iHSD) mill on the seeds of Australia’s major crop weeds during wheat chaff processing. Also examined were the impacts of chaff type and moisture content on weed seed destruction efficacy. Initially, the iHSD mill speed of 3,000 rpm was identified as the most effective at destroying rigid ryegrass seeds present in wheat chaff. Subsequent testing determined that the iHSD mill was highly effective (>95% seed kill) on all Australian crop weeds examined. Rigid ryegrass seed kill was found to be highest for lupin chaff and lowest in barley, with wheat and canola chaff intermediate. Similarly, wheat chaff moisture reduced rigid ryegrass seed kill when moisture level exceeded 12%. The broad potential of the iHSD mill was evident, in that the reductions in efficacy due to wide-ranging differences in chaff type and moisture content were relatively small (≤10%). The results from these studies confirm the high efficacy and widespread suitability of the iHSD for use in Australian crop production systems. Additionally, as this system allows the conservation of all harvest residues, it is the best HWSC technique for conservation cropping systems.

scholarly journals Productivity and Profitability of Four Crop Rotations under Limited Irrigation

2020 ◽  
Vol 36 (1) ◽  
pp. 1-9
Author(s):  
Alan J Schlegel ◽  
Yared Assefa ◽  
Daniel O’Brien
Keyword(s):  
Crop Rotation ◽  
Water Use ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Grain Sorghum ◽  
Wheat Crop ◽  
Corn Yield ◽  
Supplementary Irrigation ◽  
Corn Grain

Abstract. Selection of optimal crops and cropping systems for most efficient water use specific for local environments can improve global water security. Limited irrigation with ground water is one alternative to alleviate crops from low amount or unevenly distributed water in the growing seasons in semi-arid regions. The main objectives of this research were to quantify yield-water use relationships of three limited irrigated crops, determine effect of crop selection on profitability with limited irrigation, and identify profitable and alternative crop production systems. A field study was conducted at the Kansas State University Southwest Research-Extension Center near Tribune, Kansas, from 2012 through 2017. There were four treatments in the study, two 1-yr systems of continuous corn ( L.) (C-C) and continuous grain sorghum (L.) (GS-GS) and two 2-yr rotations of corn-grain sorghum (C-GS) and corn-winter wheat ( L.) (C-W). Overall corn yield after wheat (C-W) was about 1.4 Mg (ha)-1 greater than C-C. Corn and sorghum yields were similar grown as monoculture or in rotation with each other. Available soil water at corn planting and during the growing season were 20 to 40 mm (240 cm profile-1) less in the C-GS rotation compared with C-C and C-W rotations. Corn yield increased as water use (yield-water use) increased in C-W rotation but yield-water use relationships tended to be negative in C-C and C-GS rotations. Grain sorghum yield increased with water use in both rotations but at a greater rate in GS-GS compared with C-GS. Despite greater corn grain yield in C-W, our economic analysis showed that wheat was the least profitable of the three crops causing the C-W rotation to be least profitable. In this study, the most profitable limited irrigation crop rotation was corn-grain sorghum (C-GS). Keywords: Corn-sorghum-wheat, Crop rotation, Limited irrigation, Profitability, Supplementary irrigation, Sustainability.

scholarly journals Soil-Biodegradable Plastic Mulches Undergo Minimal in-Soil Degradation in a Perennial Raspberry System after 18 Months

Horticulturae ◽  
2020 ◽  
Vol 6 (3) ◽  
pp. 47
Author(s):  
Huan Zhang ◽  
Markus Flury ◽  
Carol Miles ◽  
Hang Liu ◽  
Lisa DeVetter
Keyword(s):  
Production System ◽  
Crop Production ◽  
Production Systems ◽  
Cropping Systems ◽  
Biodegradable Plastic ◽  
Perennial Crop ◽  
Soil Burial Test ◽  
Soil Burial ◽  
Soil Exposure

Soil-biodegradable plastic mulches (BDMs) are made from biodegradable materials that can be bio-based, synthetic, or a blend of these two types of polymers, which are designed to degrade in soil through microbial activities. The purpose of BDMs is to reduce agricultural plastic waste by replacing polyethylene (PE) mulch, which is not biodegradable. Most studies have evaluated the breakdown of BDMs within annual production systems, but knowledge of BDM breakdown in perennial systems is limited. The objective of this study was to evaluate the deterioration and degradation of BDMs in a commercial red raspberry (Rubus ideaus L.) production system. Deterioration was low (≤11% percent soil exposure; PSE) for all mulches until October 2017 (five months after transplanting, MAT). By March 2018 (10 MAT), deterioration reached 91% for BDMs but remained low for PE mulch (4%). Mechanical strength also was lower for BDMs than PE mulch. In a soil burial test in the raspberry field, 91% of the BDM area remained after 18 months. In-soil BDM degradation was minimal, although the PSE was high. Since mulch is only applied once in a perennial crop production system, and the lifespan of the planting may be three or more years, it is worth exploring the long-term degradation of BDMs in perennial cropping systems across diverse environments.

Review: Redesigning Canadian prairie cropping systems for profitability, sustainability, and resilience

2015 ◽  
Vol 95 (6) ◽  
pp. 1049-1072 ◽  
Author(s):  
Joanne R. Thiessen Martens ◽  
Martin H. Entz ◽  
Mark D. Wonneck
Keyword(s):  
Cover Crops ◽  
Environmental Sustainability ◽  
Crop Production ◽  
Cropping Systems ◽  
Farming Systems ◽  
Agroforestry Systems ◽  
Organic Production ◽  
Agricultural Systems ◽  
Canadian Prairie ◽  
Research Education

Thiessen Martens, J. R., Entz, M. H. and Wonneck, M. D. 2015. Review: Redesigning Canadian prairie cropping systems for profitability, sustainability, and resilience. Can. J. Plant Sci. 95: 1049–1072. Redesign of agricultural systems according to ecological principles has been proposed for the development of sustainable systems. We review a wide variety of ecologically based crop production practices, including crop varieties and genetic diversity, crop selection and rotation, cover crops, annual polyculture, perennial forages, perennial grains, agroforestry systems, reducing tillage, use of animal manures and green manures, soil biological fertility, organic production systems, integrated crop–livestock systems, and purposeful design of farm landscapes (farmscaping), and discuss their potential role in enhancing the profitability, environmental sustainability, and resilience of Canadian prairie cropping systems. Farming systems that most closely mimic natural systems through appropriate integration of diverse components, within a context of supportive social and economic structures, appear to offer the greatest potential benefits, while creating a framework in which to place all other farming practices. Our understanding of ecological relationships within agricultural systems is currently lacking, and a major shift in research, education, and policy will be required to purposefully and proactively redesign Canadian prairie agricultural systems for long-term sustainability.

scholarly journals An Evaluation of Summer Cover Crops for Use in Vegetable Production Systems in North Carolina

HortScience ◽  
2000 ◽  
Vol 35 (4) ◽  
pp. 600-603 ◽  
Author(s):  
Nancy G. Creamer ◽  
Keith R. Baldwin
Keyword(s):  
Cover Crops ◽  
Aboveground Biomass ◽  
Production Systems ◽  
Pennisetum Glaucum ◽  
Cropping Systems ◽  
Foxtail Millet ◽  
Vegetable Production ◽  
Vegetable Crops ◽  
Lablab Purpureus ◽  
Sorghum Sudangrass

Summer cover crops can produce biomass, contribute nitrogen to cropping systems, increase soil organic matter, and suppress weeds. Through fixation of atmospheric N2 and uptake of soil residual N, they also contribute to the N requirement of subsequent vegetable crops. Six legumes {cowpea (Vigna unguiculata L.), sesbania (Sesbania exaltata L.), soybean (Glycine max L.), hairy indigo (Indigofera hirsutum L.), velvetbean [Mucuna deeringiana (Bort.) Merr.], and lablab (Lablab purpureus L.)}; two nonlegume broadleaved species [buckwheat (Fagopyrum esculentum Moench) and sesame (Sesamum indicum L.)]; and five grasses {sorghum-sudangrass [Sorghum bicolor (L) Moench × S. sudanense (P) Stapf.], sudangrass [S. sudanense (P) Stapf.], Japanese millet [Echinochloa frumentacea (Roxb.) Link], pearl millet [Pennisetum glaucum (L). R. Br.], and German foxtail millet [Setaria italica (L.) Beauv.)]}, were planted in raised beds alone or in mixtures in 1995 at Plymouth, and in 1996 at Goldsboro, N.C. Biomass production for the legumes ranged from 1420 (velvetbean) to 4807 kg·ha-1 (sesbania). Low velvetbean biomass was attributed to poor germination in this study. Nitrogen in the aboveground biomass for the legumes ranged from 32 (velvetbean) to 97 kg·ha-1 (sesbania). All of the legumes except velvetbean were competitive with weeds. Lablab did not suppress weeds as well as did cover crops producing higher biomass. Aboveground biomass for grasses varied from 3918 (Japanese millet) to 8792 kg·ha-1 (sorghum-sudangrass). While N for the grasses ranged from 39 (Japanese millet) to 88 kg·ha-1 (sorghum-sudangrass), the C: N ratios were very high. Additional N would be needed for fall-planted vegetable crops to overcome immobilization of N. All of the grass cover crops reduced weeds as relative to the weedy control plot. Species that performed well together as a mixture at both sites included Japanese millet/soybean and sorghum-sudangrass/cowpea.

scholarly journals An Examination of the Economics of Sustainable and Conventional Horticulture

2000 ◽  
Vol 10 (4) ◽  
pp. 687-691
Author(s):  
Robin G. Brumfield
Keyword(s):  
Crop Production ◽  
Production Systems ◽  
Economic Benefits ◽  
Production Costs ◽  
Organic System ◽  
Price Premiums ◽  
Organic Systems ◽  
Long Term Study ◽  
Adverse Impacts ◽  
The Cost

Since World War II, U.S. agriculture has reduced production costs by substituting petrochemicals for labor. Adverse impacts from chemical intensive agriculture include increased pest levels, groundwater and surface water contamination, soil erosion, and concerns about harmful levels of pesticide residues. Sustainable farming programs such as integrated crop management (ICM) and organic farming encourage farmers to use systems that reduce the adverse impacts of chemical agriculture. However, before farmers adopt an alternative system, they must determine that economic benefits from the alternative farming activities exceed the costs incurred. Unfortunately, relatively few studies have compared the cost of organic crop production with conventional production systems. Results of these studies are mixed. In some studies, organic systems are more profitable than conventional systems with organic price premiums, but are not economically viable without price premiums. In one long-term study, the organic system was more profitable than a conventional one if the cost of family labor was ignored, but less profitable if it was included. In some studies, net returns were higher for ICM than for conventional or organic systems, but in others, they were higher. Results also vary on a crop by crop basis.

Sign in / Sign up

Export Citation Format

Share Document