scholarly journals Study of the Painting Methods of Mural Paintings in Ancient Tombs of Goguryeo Using Scanning Electron Microscope

2013 ◽  
Vol 19 (S5) ◽  
pp. 157-161 ◽  
Author(s):  
Kyeongsoon Han ◽  
Sangjin Lee ◽  
Hwasoo Lee
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Energy Dispersive ◽  
Elemental Mapping ◽  
The West ◽  
X Ray ◽  
Mural Paintings ◽  
Scanning Electron

AbstractDisputes on the painting methods of Goguryeo murals can mainly be categorized into whether the murals adapted eastern secco or western fresco; however, the murals have their own unique methods as well. There are different viewpoints among experts on interpreting the painting methods. This study involved the creation of research samples to discover the painting methods under dispute and may help discover the methods based on scanning electron microscopy energy-dispersive X-ray spectroscopy (SEM-EDX) studies. Goguryeo murals introduced pseudo-fresco rather than buon fresco methods. Unlike fresco techniques in the West, Goguryeo painters mixed traditional soft binders and adapted typical secco painting techniques for paintings, borders, and corrections after drying. The disputed issues may be resolved by these techniques, and samples may be produced based on the analyzed data. Therefore, many questions can finally be answered through SEM-EDX elemental mapping.

Synthesis and Analysis of Carbide-Derived Carbon from TiC by Chlorination

2014 ◽  
Vol 602-603 ◽  
pp. 463-466 ◽  
Author(s):  
Jin Jia ◽  
Yuan Yuan Zhu ◽  
Ya Fei Zhang ◽  
Ruo Yu Chen ◽  
Bao Lin Xing ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carbide Derived Carbon ◽  
Scanning Electron ◽  
Shape And Size

Carbide-derived carbons (CDCs) are produced from carbides by removing non-carbon elements in the process of selective etching. In this paper, CDC was prepared from TiC by chlorination at the temperature range of 600~1100°C. In the chlorinating process, carbide-derived carbon with different microstructure was obtained by controlling the reaction temperature. The structures of CDC were revealed with X-ray diffraction and Raman spectroscopy. The morphologies of CDC were analyzed by scanning electron microscope. From X-ray diffraction analysis, the CDC obtained from TiC in this experiment mainly consisted of amorphous carbon. Basing on scanning electron microscopy, carbide-derived carbon from TiC maintained the shape and size of TiC particles. Keywords: Carbide-derived carbons; chlorination; TiC

High Resolution Scanning Electron Microscopy

1991 ◽  
Vol 49 ◽  
pp. 478-479
Author(s):  
David Joy ◽  
James Pawley
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Beam ◽  
Electron Microscope ◽  
High Resolution ◽  
Scanning Electron Microscope ◽  
Electron Probe ◽  
Impact Point ◽  
Interaction Volume ◽  
Scanning Electron

The scanning electron microscope (SEM) builds up an image by sampling contiguous sub-volumes near the surface of the specimen. A fine electron beam selectively excites each sub-volume and then the intensity of some resulting signal is measured. The spatial resolution of images made using such a process is limited by at least three factors. Two of these determine the size of the interaction volume: the size of the electron probe and the extent to which detectable signal is excited from locations remote from the beam impact point. A third limitation emerges from the fact that the probing beam is composed of a finite number of discrete particles and therefore that the accuracy with which any detectable signal can be measured is limited by Poisson statistics applied to this number (or to the number of events actually detected if this is smaller).

PHAX-SCAN: Functional integration of a Scanning Electron Microscope and an energy-dispersive x-ray analyser

1989 ◽  
Vol 47 ◽  
pp. 56-57
Author(s):  
Marc H. Peeters ◽  
Max T. Otten
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
High Speed ◽  
High Performance ◽  
Functional Integration ◽  
Energy Dispersive ◽  
X Rays ◽  
X Ray ◽  
High Speed Analysis ◽  
Scanning Electron

Over the past decades, the combination of energy-dispersive analysis of X-rays and scanning electron microscopy has proved to be a powerful tool for fast and reliable elemental characterization of a large variety of specimens. The technique has evolved rapidly from a purely qualitative characterization method to a reliable quantitative way of analysis. In the last 5 years, an increasing need for automation is observed, whereby energy-dispersive analysers control the beam and stage movement of the scanning electron microscope in order to collect digital X-ray images and perform unattended point analysis over multiple locations.The Philips High-speed Analysis of X-rays system (PHAX-Scan) makes use of the high performance dual-processor structure of the EDAX PV9900 analyser and the databus structure of the Philips series 500 scanning electron microscope to provide a highly automated, user-friendly and extremely fast microanalysis system. The software that runs on the hardware described above was specifically designed to provide the ultimate attainable speed on the system.

SCANNING ELECTRON MICROSCOPE: POSSIBILITIES FOR STUDYING KIDNEY DISEASES

2020 ◽  
pp. 176-182
Author(s):  
Mamaeva S.N. ◽  
Vinokurov R.R. ◽  
Munkhalova Ya.A. ◽  
Dyakonova D.P. ◽  
Platonova V.A. ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Red Blood Cells ◽  
Blood Cells ◽  
Filtration Rate ◽  
Kidney Diseases ◽  
First Time ◽  
Scanning Electron

Currently, due to the intensive development of high-tech science-intensive medical and research devices, more and more attention is paid to the development of diagnostics of rare and difficult to diagnose diseases. It is known that among numerous nephropathies, hematuria may be the only symptom of kidney and urinary tract diseases, which complicates their diagnosis and treatment. In order to develop new approaches for the diagnosis of nephropathies, the authors have been studying the morphology of red blood cells in the blood and urine of children and adults using a scanning electron microscope for several years. The paper presents the results of studies of children with various kidney diseases, including IgA-nephropathy, and chronic glomerulonephritis. Scanning electron microscopy was used for the first time to detect nanoparticles on the surface of red blood cells, the size of which is comparable to the size of viruses, which became the basis for one of the authors ' assumptions, namely, the possible transport of certain types of viruses by red blood cells. Thus, some kidney diseases could be considered virus-associated. This paper presents for the first time the results of determining the glomerular filtration rate of both kidneys separately in the study of separate kidney function and of the study of urine smears obtained during catheterization of the ureters in patients with hydronephrosis of one of the kidneys by scanning electron microscopy. As in previous studies, nanoparticles were found on the surface of red blood cells, which leads to the conclusion about the possible viral nature of the disease of the considered patient. In addition, smear images obtained using a microscope showed a significant difference in the elements of the right and left kidneys urine, which did not contradict the data on the study of glomerular filtration rate. According to the authors, the capabilities of the scanning electron microscope can be applied in fundamental research of kidney diseases at the cellular and molecular levels, forming new ideas about their origin, as well as on the basis of which new methods of non-invasive diagnostics can be built.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

The External Morphology of the Eggs of Culex (Culex) saltanensis (Diptera: Culicidae) Under Scanning Electron Microscopy

2020 ◽  
Author(s):  
J R Santos-Mallet ◽  
T D Balthazar ◽  
A A Oliveira ◽  
W A Marques ◽  
A Q Bastos ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Optical Microscopy ◽  
Osmium Tetroxide ◽  
Neotropical Region ◽  
External Morphology ◽  
Metal Supports ◽  
Scanning Electron

Abstract The aim of the present study was to describe the morphology of the eggs of Culex (Culex) saltanensis Dyar that occurs in the Neotropical region. Eggs of the Cx. (Cux.) saltanensis were collected at the Mata Atlântica FIOCRUZ campus, fixed in 1% osmium tetroxide, prepared for mounting on metal supports, observed under a scanning electron microscope, and described morphologically. The eggs had a coniform shape with a length of approximately 0.5 mm (505–510 µm) and a width in the median portion of 117 µm (113–123 µm). Upper portion is lined with tubers of irregular shape and varying sizes (0.64–1.31 µm), located on a cross-linked matrix forming bands observed under optical microscopy. The micropyle is encased in a necklace of approximately 6.6-µm plates arranged in a flower-like shape. Comparing Cx. (Cux.) saltanensis eggs with several species of different genera, important divergent characteristics can be observed. However, this study points to the need for new descriptions of eggs of species belonging to the same subgenus in order to analyze if there will be differences between them. Culex (Cux.) saltanensis eggs have particular characteristics not observed in eggs of other Culicidae genera.

Sign in / Sign up

Export Citation Format

Share Document