Aero-Engine Efficiencies

1920 ◽  
Vol 3 ◽  
pp. 3-36 ◽  
Author(s):  
A. H. Gibson
Keyword(s):  
Thermal Efficiency ◽  
Mechanical Efficiency ◽  
Heat Energy ◽  
Effective Pressure ◽  
Long Distance ◽  
Brake Mean Effective Pressure ◽  
Induction System ◽  
Aero Engine ◽  
Distance Work ◽  
Valve Area

By the efficiency of a petrol engine, one usually understands the thermal efficiency, or the ratio of the heat returned as work on the crank shaft, to the heat energy in the fuel. This efficiency is vitally important in an aero engine intended for long-distance work, since it directly affects the weight of fuel to be carried.The necessity for a high thermal efficiency on the B.H.P. almost of necessity involves that of a high mechanical efficiency, that is it requires that the losses due to mechanical friction and to pumping losses shall be small.But an engine may have a high thermal efficiency and yet have a comparatively low brake mean effective pressure. It may, owing to too small a valve area or to poor design of the induction system, only be able to draw a small weight charge into the cylinder, although it may use this very efficiently once it is in the cylinder.

Throttleless Premixed-Charge Engines: Concept and Experiment

1994 ◽  
Vol 208 (1) ◽  
pp. 13-24 ◽  
Author(s):  
P D Ronney ◽  
M Shoda ◽  
S T Waida ◽  
E J Durbin
Keyword(s):  
Carbon Monoxide ◽  
Thermal Efficiency ◽  
Equivalence Ratio ◽  
Practical Implementation ◽  
Effective Pressure ◽  
Unburned Hydrocarbon ◽  
Brake Mean Effective Pressure ◽  
Lean Misfire Limit

A method of controlling the brake mean effective pressure (b.m.e.p.) of a premixed-charge engine is proposed which does not require the use of a throttle and does not exhibit significant throttling losses. In this method, a combination of adjustment of the mixture equivalence ratio and preheating of the mixture is used to control the b.m.e.p. The preheating serves two purposes: it reduces the density of the mixture and it broadens the lean misfire limit. Experiments on the performance of engines controlled with this strategy are compared with conventional throttled engines. As much as 16 per cent improvement in thermal efficiency was observed at the same b.m.e.p. The untreated NOx emissions are found to be much lower in the throttleless engine at the same b.m.e.p. while carbon monoxide (CO) and unburned hydrocarbon (UHC) emissions are comparable to but somewhat higher than throttled engines. Practical implementation of the concept is discussed.

scholarly journals PENGARUH PENGATURAN WAKTU INJEKSI DAN DURASI INJEKSI TERHADAP BRAKE MEAN EFFECTIVE PRESSURE DAN THERMAL EFFICIENCY PADA MESIN DIESEL DUAL FUEL

2017 ◽  
Vol 17 (2) ◽  
pp. 67-74
Author(s):  
Ahmad Arif ◽  
Nuzul Hidayat ◽  
M Yasep Setiawan
Keyword(s):  
Internal Combustion Engine ◽  
Thermal Efficiency ◽  
Combustion Engine ◽  
Internal Combustion ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Effective Pressure ◽  
Brake Mean Effective Pressure

CNG merupakan bahan bakar gas yang potensial untuk internal combustion engine karena lebih ekonomis dan ramah lingkungan. Dalam penelitian ini dilakukan pengujian pengaruh pengaturan waktu injeksi dan durasi injeksi CNG terhadap brake mean effective pressure dan thermal efficiency pada mesin diesel dual fuel berbahan bakar solar dan CNG. Penelitian ini dilakukan secara eksperimental dengan menginjeksikan CNG ke intake manifold yang dikontrol ECU. Metode yang digunakan untuk mengetahui nilai pengaturan optimum adalah dengan mapping waktu injeksi dan durasi injeksi CNG melalui software Vemstune pada komputer. Waktu injeksi diatur pada 35°, 40° dan 45° ATDC dan durasi injeksi sebesar 25, 23 dan 21 ms. Pengujian dilakukan dengan putaran mesin konstan 1500 rpm dan pembebanan dari 500 sampai 4000 watt dengan interval 500 watt. Hasil penelitian menunjukkan bahwa perubahan brake mean effective pressure antara single fuel dan dual fuel relatif kecil karena perubahan arus dan tegangan yang dihasilkan genertor juga kecil. Sedangkan thermal efficiency optimal terdapat pada pengaturan waktu injeksi 35o ATDC dan durasi injeksi 25 ms, yaitu terjadi penurunan thermal efficiency rata-rata sebanyak 31,51% daripada single fuel.

The methodological approach for the determination of the pressure of artificial raindrops as a question of the theory of splash soil erosion

2020 ◽  
pp. 24-28
Author(s):  
Mihail Zver'kov
Keyword(s):  
Block Diagram ◽  
Methodological Approach ◽  
Control Measures ◽  
Soil Conditions ◽  
Effective Pressure ◽  
Long Distance ◽  
Splash Erosion ◽  
Rain Drops ◽  
Artificial Rain ◽  
The Impact

To the article the results of the theoretical and experimental researches are given on questions of estimates of the dynamic rate effect of raindrop impact on soil. The aim of this work was to analyze the current methods to determine the rate of artificial rain pressure on the soil for the assessment of splash erosion. There are the developed author’s method for calculation the pressure of artificial rain on the soil and the assessment of splash erosion. The study aims to the justification of evaluation methods and the obtaining of quantitative characteristics, prevention and elimination of accelerated (anthropogenic) erosion, the creation and the realization of the required erosion control measures. The paper considers the question of determining the pressure of artificial rain on the soil. At the moment of raindrops impact, there is the tension in the soil, which is called vertical effective pressure. It is noted that the impact of rain drops in the soil there are stresses called vertical effective pressure. The equation for calculation of vertical effective pressure is proposed in this study using the known spectrum of raindrops. Effective pressure was 1.4 Pa for the artificial rain by sprinkler machine «Fregat» and 5.9 Pa for long distance sprinkler DD-30. The article deals with a block diagram of the sequence for determining the effective pressure of rain drops on the soil. This diagram was created by the author’s method of calculation of the effective pressure of rain drops on the soil. The need for an integrated approach to the description of the artificial rain impact on the soil is noted. Various parameters characterizing drop erosion are considered. There are data about the mass of splashed soil in the irrigation of various irrigation machinery and installations. For example, the rate (mass) of splashed soil was 0.28…0.78 t/ha under irrigation sprinkler apparatus RACO 4260–55/701C in the conditions of the Ryazan region. The method allows examining the environmental impact of sprinkler techniques for analyzes of the pressure, caused by raindrops, on the soil. It can also be useful in determining the irrigation rate before the runoff for different types of sprinkler equipment and soil conditions.

Numerical Studies of Novel Aero Engine Secondary Combustors for Low-NOx Emissions

2020 ◽  
Author(s):  
Andrew Rolt ◽  
Victor Martínez Bueno ◽  
Mirko Romanelli ◽  
Xiaoxiao Sun ◽  
Pierre Gauthier ◽  
...  
Keyword(s):  
Thermal Efficiency ◽  
Pressure Ratio ◽  
Flow Region ◽  
Nox Emissions ◽  
Low Oxygen ◽  
Engine Operation ◽  
Horizon 2020 ◽  
Novel Technologies ◽  
Numerical Studies ◽  
Aero Engine

Abstract Gas turbine thermal efficiency and fuel burn are very dependent on turbine entry temperature and overall pressure ratio (OPR). Unfortunately, increases in these two parameters compromise other key aspects of engine operation and tend to increase emissions of nitrogen oxides (NOx). The European Horizon 2020 ULTIMATE project researched advanced-cycle aero engines with synergistic combinations of novel technologies to increase thermal efficiency without increasing emissions. One candidate technology was the addition of secondary combustion to increase the mean temperature of heat addition to improve thermal efficiency while limiting the primary combustor flame temperatures and NOx formation. However, an overall reduction in NOx also requires the secondary combustor to be a low-NOx design. This paper describes numerical studies carried out on novel aero engine secondary combustor concepts developed in two MSc-thesis research projects. The studies have explored the potential of oxy-poor-flame combustion concepts. These annular combustor designs featured two distinct regions: (i) the vortex zone, which promotes recirculation of combustion products, a prerequisite for low-oxygen combustion, and (ii) a through-flow region where part of the incoming flow bypasses the vortex before the flows mix again. These studies have demonstrated the advantages and some limitations of the proposed designs and emissions assessments in comparison with previous secondary combustor studies. They suggest very low NOx is achievable with oxy-poor combustion, but will be more difficult if the incoming oxygen levels are above 10%. More-accurate assessments will require LES modelling and inclusion of the primary combustor in the simulations. However, if the low overall NOx emissions would include relatively higher levels of nitrous oxide (N2O) then this might raise concerns with respect to global warming.

scholarly journals Comparison of Physics-Based, Semi-empirical and Neural Network-based Models for Model-based Combustion Control in a 3.0 L Diesel Engine

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3423 ◽  
Author(s):  
Hu ◽  
d’Ambrosio ◽  
Finesso ◽  
Manelli ◽  
Marzano ◽  
...  
Keyword(s):  
Neural Network ◽  
Steady State ◽  
Diesel Engine ◽  
Effective Pressure ◽  
Combustion Control ◽  
Ann Model ◽  
Control Applications ◽  
Model Based ◽  
Brake Mean Effective Pressure ◽  
Semi Empirical

A comparison of four different control-oriented models has been carried out in this paper for the simulation of the main combustion metrics in diesel engines, i.e., combustion phasing, peak firing pressure, and brake mean effective pressure. The aim of the investigation has been to understand the potential of each approach in view of their implementation in the engine control unit (ECU) for onboard combustion control applications. The four developed control-oriented models, namely the baseline physics-based model, the artificial neural network (ANN) physics-based model, the semi-empirical model, and direct ANN model, have been assessed and compared under steady-state conditions and over the Worldwide Harmonized Heavy-duty Transient Cycle (WHTC) for a Euro VI FPT F1C 3.0 L diesel engine. Moreover, a new procedure has been introduced for the selection of the input parameters. The direct ANN model has shown the best accuracy in the estimation of the combustion metrics under both steady-state/transient operating conditions, since the root mean square errors are of the order of 0.25/1.1 deg, 0.85/9.6 bar, and 0.071/0.7 bar for combustion phasing, peak firing pressure, and brake mean effective pressure, respectively. Moreover, it requires the least computational time, that is, less than 50 s when the model is run on a rapid prototyping device. Therefore, it can be considered the best candidate for model-based combustion control applications.

Comparison of Diesel Engine Efficiency and Combustion Characteristics Between Different Bore Engines

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
Jue Li ◽  
Timothy J. Jacobs ◽  
Tushar Bera ◽  
Michael A. Parkes
Keyword(s):  
Diesel Engine ◽  
Combustion Engine ◽  
Volume Ratio ◽  
Mechanical Efficiency ◽  
Combustion Characteristics ◽  
Stroke Length ◽  
Engine Load ◽  
Engine Efficiency ◽  
Brake Mean Effective Pressure ◽  
The Difference

This study investigates the effects of engine bore size on diesel engine performance and combustion characteristics, including in-cylinder pressure, ignition delay, burn duration, and fuel conversion efficiency, using experiments between two diesel engines of different bore sizes. This study is part of a larger effort to discover how fuel property effects on combustion, engine efficiency, and emissions may change for differently sized engines. For this specific study, which is centered only on diagnosing the role of engine bore size on engine efficiency for a typical fuel, the engine and combustion characteristics are investigated at various injection timings between two differently sized engines. The two engines are nearly identical, except bore size, stroke length, and consequently displacement. Although most of this diagnosis is done with experimental results, a one-dimensional model is also used to calculate turbulence intensities with respect to geometric factors; these results help to explain observed differences in heat transfer characteristics of the two engines. The results are compared at the same brake mean effective pressure (BMEP) and show that engine bore size has a significant impact on the indicated efficiency. It is found that the larger bore engine has a higher indicated efficiency than the smaller displaced engine. Although the larger engine has higher turbulence intensities, longer burn durations, and higher exhaust temperature, the lower surface area to volume ratio and lower reaction temperature leads to lower heat losses to the cylinder walls. The difference in the heat loss to the cylinder walls between the two engines is found to increase with increasing engine load. In addition, due to the smaller volume-normalized friction loss, the larger sized engine also has higher mechanical efficiency. In the net, since the brake efficiency is a function of indicated efficiency and mechanical efficiency, the larger sized engine has higher brake efficiency with the difference in brake efficiency between the two engines increasing with increasing engine load. In the interest of efficiency, larger bore designs for a given displacement (i.e., shorter strokes or few number of cylinders) could be a means for future efficiency gains.

Performance Analysis of Pongamia Biodiesel as an Alternative Fuel for CI Engine

2019 ◽  
Vol 895 ◽  
pp. 139-143
Author(s):  
A. Anand ◽  
B.S. Nithyananda ◽  
G.V. Naveen Prakash
Keyword(s):  
Diesel Engine ◽  
Energy Use ◽  
Methyl Esters ◽  
Mechanical Efficiency ◽  
Alternative Fuel ◽  
Transportation Fuels ◽  
Brake Mean Effective Pressure ◽  
Ci Engine ◽  
Economical Growth ◽  
Pongamia Methyl Ester

India is a fastest growing major economy in 2018, with a growth rate of 7.4 per cent GDP. Energy use in developing countries like India has risen more than fourfold over the past three decades and is expected to continue increasing rapidly in the future. Energy is essential for a economical growth of any county. Biofuels derived from renewable resources will become a alternative supplement for the conventional energy sources in meeting the increasing requirements for transportation fuels. In the present paper, effort are made to evaluate the pongamia biodiesel of 20% Blend (PB20) with neat diesel as an alternative fuel for CI engine. The pongamia oil is converted into pongamia methyl esters (Biodiesel) using two step process Esterification and Transesterification. The fuel properties of raw pongamia methyl ester and blend (PB20) are evaluated as per ASTM/BIS standards to check their feasibility as an alternative fuel. The prepared blend is used to run the computerized CRDI diesel engine at different load conditions. From the experimental investigation made, PB20 has a potential to be as an alternative fuel for diesel engine. The performance of PB20 with respect to Brake Thermal Efficiency (BTHE), Mechanical Efficiency, Brake Mean Effective Pressure (BMEP) and Specific Fuel Consumption (SFC) is comparatively low when compared to neat diesel. The P-Ɵ and P-V diagram shows that the combustion of PB20 is as similar to that of neat diesel.

Piston Temperatures in a Sleeve Valve Oil Engine

1937 ◽  
Vol 135 (1) ◽  
pp. 35-71 ◽  
Author(s):  
H. Wright Baker
Keyword(s):  
Cast Iron ◽  
Engine Speed ◽  
Effective Pressure ◽  
Final Temperature ◽  
Piston Head ◽  
Brake Mean Effective Pressure ◽  
Head Section ◽  
Normal Water ◽  
Time Required ◽  
Valve Engine

The paper describes tests on a Mirrlees-Ricardo sleeve valve engine of inches bore, running at speeds up to 1,400 r.p.m. The pistons used were: (1) a simple piston of cast iron; (2) a piston with tapered head section, cast in “L8” alloy; and (3) a heavily ribbed and strutted piston of “Y” alloy. A robust form of thermocouple gear which has been devised is described in the paper, and the probable errors are discussed. The temperatures attained by a number of points in each piston are shown for various conditions. The effect of the sleeve is much less than might be expected. The rates of heat reception by the central and outer portions of the piston head differ considerably owing to the vortex type of combustion chamber used. Values of these rates have been estimated for different loads and speeds. The alloy pistons become warm in about half the time required by the cast iron piston. Piston temperature appears to be a linear function of engine speed, the alloy pistons showing an increase of 42 deg. C. at the centre when the speed was increased from 800 to 1,400 r.p.m. at constant brake mean effective pressure. The temperatures of the lower edges of ribs of moderate depth were only 10–18 deg. C. cooler than the under surface of an unribbed piston. Distortion of the pin seatings due to the expansion of the struts must be very slight. With normal water circulation and a constant temperature of water supply, piston temperatures in this engine are almost independent of the final temperature of the water.

Application of Over-Expansion Cycle to a Larger Gasoline Engine With Late-Closing of Intake Valves

2002 ◽  
Author(s):  
Seiichi Shiga ◽  
Kenji Nishida ◽  
Shizuo Yagi ◽  
Youichi Miyashita ◽  
Yoshiharu Yuzawa ◽  
...  
Keyword(s):  
Compression Ratio ◽  
Thermal Efficiency ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Mechanical Efficiency ◽  
Expansion Ratio ◽  
Brake Thermal Efficiency ◽  
Gasoline Engines ◽  
Cylinder Test ◽  
Test Engine

This paper presents further investigation into the effect of over-expansion cycle with late-closing of intake valves on the engine performance in gasoline engines. A larger single-cylinder test engine with the stroke volume of 650 cc was used with four kinds of expansion ratio (geometrical compression ratio) from 10 to 25 and four sets of intake valve closure (I.V.C.) timings from 0 to 110 deg C.A. ABDC. Late-closing has an effect of decreasing the pumping work due to the reduction of intake vacuum, althogh higher expansion ratio increases the friction work due to the average cylinder pressure level. Combining the higher expansion ratio with the late-closing determines the mechanical efficiency on the basis of these two contrastive effects. The indicated thermal efficiency is mostly determined by the expansion ratio and little affected by the nominal compression ratio. The value of the indicated thermal efficiency reaches to 48% at most which is almost comparable with the value of diesel engines. The improvement of both indicated and brake thermal efficiency reaches to 16% which is much higher than ever reported by the authors. A simple thermodynamic calculation could successfully explain the behavior of the indicated thermal efficiency. The brake thermal efficiency could also be improved due to the increase in both mechanical and indicated efficiencies.

Effects of EGR and Boost Pressure on Reactivity Controlled Compression Ignition (RCCI) Engine at High Load Operating Conditions

2014 ◽  
Author(s):  
Yifeng Wu ◽  
Rolf D. Reitz
Keyword(s):  
Peak Pressure ◽  
Pressure Rise ◽  
High Load ◽  
Operating Conditions ◽  
Boost Pressure ◽  
Compression Ignition ◽  
Effective Pressure ◽  
Reactivity Controlled Compression Ignition ◽  
Brake Mean Effective Pressure ◽  
Diesel Injection

Reactivity Controlled Compression Ignition (RCCI) at engine high load operating conditions is investigated in this study. The effects of EGR and boost pressure on RCCI combustion were studied by using a multi-dimensional computational fluid dynamics (CFD) code. The model was first compared with a previous CFD model, which has been validated against steady-state experimental data of gasoline-diesel RCCI in a multi-cylinder light duty engine. An RCCI piston with a compression ratio of 15:1 was then proposed to improve the combustion and emissions at high load. The simulation results showed that 18 bar indicated mean effective pressure (IMEP) could be achieved with gasoline-diesel RCCI at an EGR rate of 35 % and equivalence ratio of 0.96, while the peak pressure rise rate (PPRR) and engine combustion efficiency could both be controlled at reasonable levels. Simulations using both early and late direct-injection (DI) of diesel fuel showed that RCCI combustion at high load is very sensitive to variations of the exhaust gas recirculation (EGR) amount. Higher IMEP is obtained by using early diesel injection, and it is less sensitive to EGR variation compared to late diesel injection. Reduced unburned hydrocarbon (HC), carbon monoxide (CO), soot and slightly more nitrogen oxides (NOx) emissions were seen for early diesel injection. HC, CO and soot emissions were found to be more sensitive to EGR variation at late diesel injection timings. However, there was little difference in terms of peak pressure, efficiencies, PPRR and phasing under varying EGR rates. The effect of boost pressure on RCCI at high load operating conditions was also studied at different EGR rates. It was found that combustion and emissions were improved, and the sensitivity of the combustion and emission to EGR was reduced with higher boost pressures. In addition, cases with similar combustion phasing and reasonable PPRR were analyzed by using an experimentally validated GT-Power model. The results indicated that although higher IMEP was generated at higher boost pressures, the brake mean effective pressure (BMEP) was similar compared to that obtained with lower boost pressures due to higher pumping losses.

Sign in / Sign up

Export Citation Format

Share Document