Vapor Phase Conversion Synthesis of Higher Manganese Silicide (MnSi1.75) Nanowire Arrays for Thermoelectric Applications

2013 ◽  
Vol 25 (4) ◽  
pp. 632-638 ◽  
Author(s):  
Ankit Pokhrel ◽  
Zachary P. Degregorio ◽  
Jeremy M. Higgins ◽  
Steven N. Girard ◽  
Song Jin
Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1880
Author(s):  
Chin-Li Shen ◽  
Shu-Meng Yang ◽  
Kuo-Chang Lu

In this work, we report a novel and efficient silicidation method to synthesize higher manganese silicide (HMS) nanowires with interesting characterization and physical properties. High density silicon nanowire arrays fabricated by chemical etching reacted with MnCl2 precursor through a unique double tube chemical vapor deposition (CVD) system, where we could enhance the vapor pressure of the precursor and provide stable Mn vapor with a sealing effect. It is crucial that the method enables the efficient formation of high quality higher manganese silicide nanowires without a change in morphology and aspect ratio during the process. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to characterize the HMS nanowires. High-resolution TEM studies confirm that the HMS nanowires were single crystalline Mn27Si47 nanowires of Nowotny Chimney Ladder crystal structures. Magnetic property measurements show that the Mn27Si47 nanowire arrays were ferromagnetic at room temperature with a Curie temperature of over 300 K, highly depending on the relationship between the direction of the applied electric field and the axial direction of the standing nanowire arrays. Field emission measurements indicate that the 20 μm long nanowires possessed a field enhancement factor of 3307. The excellent physical properties of the HMS nanowires (NWs) make them attractive choices for applications in spintronic devices and field emitters.


Author(s):  
Gabin Grégoire ◽  
Mohammed Zeghouane ◽  
Curtis Goosney ◽  
Nebile Isik Goktas ◽  
Philipp Staudinger ◽  
...  

2019 ◽  
Vol 19 (3) ◽  
pp. 1699-1703 ◽  
Author(s):  
Si-Young Son ◽  
Yeon-Jin Baek ◽  
Ji-Hyun Beck ◽  
Jong-Bae Kim ◽  
Seung-Ho Yang ◽  
...  

Author(s):  
Shijie Leow ◽  
Andrew J. Koehler ◽  
Lauren E. Cronmiller ◽  
Xiangchen Huo ◽  
Gabriella D. Lahti ◽  
...  

Vapor phase conversion of 3-hydroxybutyric and crotonic acid to propylene in a continuous-flow reactor over silica–alumina and niobium catalysts demonstrates a new strategy for producing renewable fuels and chemicals from wastewater carbon.


1948 ◽  
Vol 26b (8) ◽  
pp. 581-591 ◽  
Author(s):  
R. V. V. Nicholls ◽  
Maurice Morton

Optimum conditions for the vapor phase conversion of 1,1-diphenylethane to styrene and benzene over activated Morden bentonite have been found to be a temperature of 600 °C., rapid feed rates, and the use of water vapor as diluent. Ethylbenzene has been found in the reaction products as a hydrogenation product. Styrene content has been found to be dependent directly upon vapor velocity while the conversion efficiency was found to be related directly to the use of water vapor as an inhibitor of carbon deposition on the catalyst.


Sign in / Sign up

Export Citation Format

Share Document