scholarly journals A New Digital Terrain Model of the Huygens Landing Site on Saturn's Largest Moon, Titan

2020 ◽  
Vol 7 (12) ◽  
Author(s):  
C. Daudon ◽  
A. Lucas ◽  
S. Rodriguez ◽  
S. Jacquemoud ◽  
A. Escalante López ◽  
...  
Keyword(s):  
Digital Terrain Model ◽  
Landing Site ◽  
Terrain Model ◽  
Digital Terrain

scholarly journals Digital terrain model reconstruction and preliminary scientific exploration planning of the Chang'E 3

2014 ◽  
Vol XL-4 ◽  
pp. 149-151
Author(s):  
J. Liu ◽  
X. Ren ◽  
L. Mu ◽  
F. Wang ◽  
W. Wang ◽  
...  
Keyword(s):  
Digital Terrain Model ◽  
Landing Site ◽  
Model Reconstruction ◽  
Terrain Model ◽  
Topographic Features ◽  
Digital Terrain ◽  
Scientific Exploration ◽  
Terrain Models ◽  
Image Pairs ◽  
Yutu Rover

At 13:11 (GMT) December 14, 2013 Chang’e 3 (CE-3) successfully landed at 19.51° W, 44.12° N northwestern Mare Imbrium on the Moon, making it China's first planetary mission to land on a celestial body other than Earth. CE-3 explore comprises a lander and a rover. It carries eight scientific instruments onboard, including the descent camera on the lander, and the panoramic camera on the rover. These cameras imaged the topographic features around the landing site. This paper mainly presents the digital terrain model reconstruction techniques for the panoramic camera. Image pairs obtained during the first lunar day are used to reconstructed 3D Digital Terrain Models of 0.02 m resolution near observation points E and S3. The maps have been extensively used to support Yutu operations and strategic planning of the mission. The preliminary scientific exploration planning of the Yutu rover for the second lunar day has been made.

scholarly journals EVALUATING STEREO DTM QUALITY AT JEZERO CRATER, MARS WITH HRSC, CTX, AND HIRISE IMAGES

2020 ◽  
Vol XLIII-B3-2020 ◽  
pp. 1129-1136
Author(s):  
R. L. Kirk ◽  
R. L. Fergason ◽  
B. Redding ◽  
D. Galuszka ◽  
E. Smith ◽  
...  
Keyword(s):  
High Resolution ◽  
Digital Terrain Model ◽  
Landing Site ◽  
Horizontal Resolution ◽  
Ground Sample ◽  
Gale Crater ◽  
Terrain Model ◽  
Digital Terrain ◽  
Spatial Registration ◽  
Imaging Science

Abstract. We have used a high-precision, high-resolution digital terrain model (DTM) of the NASA Mars 2020 rover Perseverance landing site in Jezero crater based on mosaicked images from the Mars Reconnaissance Orbiter High Resolution Imaging Science Experiment (MRO HiRISE) camera as a reference dataset to evaluate DTMs based on Mars Express High Resolution Stereo Camera (MEX HRSC) and MRO Context camera (CTX) images. Results are consistent with our earlier HRSC-HiRISE comparisons at the Mars Science Laboratory (MSL) Curiosity landing site in Gale crater, confirming that those results were not compromised by the small area compared and potential problems with spatial registration. Specifically, height errors are on the order of half a pixel and correspond to an image matching error of 0.2–0.3 pixel but estimates of horizontal resolution are 10–20 pixels. Products from the HRSC team pipeline at DLR are smoother but more precise vertically than those produced by using the commercial stereo package SOCET SET®. The DLR products are also homogenous in quality, whereas the SOCET products are less smoothed and have higher errors in rougher terrain. Despite this weak variation, our results are consistent with a rule of thumb of 0.2–0.3 pixel matching precision based on many prior studies. Horizontal resolution is significantly coarser than the DTM ground sample distance (GSD), which is typically 3–5 pixels.

scholarly journals The MASCOT landing area on asteroid (162173) Ryugu: Stereo-photogrammetric analysis using images of the ONC onboard the Hayabusa2 spacecraft

2019 ◽  
Vol 632 ◽  
pp. L4 ◽  
Author(s):  
F. Preusker ◽  
F. Scholten ◽  
S. Elgner ◽  
K.-D. Matz ◽  
S. Kameda ◽  
...  
Keyword(s):  
High Resolution ◽  
Control Point ◽  
Digital Terrain Model ◽  
Landing Site ◽  
Surface Model ◽  
Data Sets ◽  
Camera System ◽  
Terrain Model ◽  
Digital Terrain ◽  
Camera Orientation

A high-resolution 3D surface model, map-projected to a digital terrain model (DTM), and precisely ortho-rectified context images (orthoimages) of MASCOT landing site area are important data sets for the scientific analysis of relevant data that have been acquired with MASCOT’s image camera system MASCam and other instruments (e.g., the radiometer MARA and the magnetometer MASMag). We performed a stereo-photogrammetric (SPG) analysis of 1050 images acquired from the Hayabusa2 Optical Navigation Camera system (ONC) during the asteroid characterization phase and the MASCOT release phase in early October 2018 to construct a photogrammetric control point network of asteroid (162173) Ryugu. We validated existing rotational parameters for Ryugu and improved the camera orientation (position and pointing) of the ONC images to decimeter accuracy using SPG bundle block adjustment. We produced a high-resolution DTM of the entire MASCOT landing site area. Finally, based on this DTM, a set of orthoimages from the highest-resolution ONC images around MASCOT’s final rest position complements the results of this analysis.

scholarly journals The Effect of LiDAR Sampling Density on DTM Accuracy for Areas with Heavy Forest Cover

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 265
Author(s):  
Mihnea Cățeanu ◽  
Arcadie Ciubotaru
Keyword(s):  
Forest Cover ◽  
Initial Point ◽  
Ground Surface ◽  
Digital Terrain Model ◽  
Morphological Data ◽  
Sampling Density ◽  
Terrain Model ◽  
Digital Terrain ◽  
Point Density ◽  
The Impact

Laser scanning via LiDAR is a powerful technique for collecting data necessary for Digital Terrain Model (DTM) generation, even in densely forested areas. LiDAR observations located at the ground level can be separated from the initial point cloud and used as input for the generation of a Digital Terrain Model (DTM) via interpolation. This paper proposes a quantitative analysis of the accuracy of DTMs (and derived slope maps) obtained from LiDAR data and is focused on conditions common to most forestry activities (rough, steep terrain with forest cover). Three interpolation algorithms were tested: Inverse Distance Weighted (IDW), Natural Neighbour (NN) and Thin-Plate Spline (TPS). Research was mainly focused on the issue of point data density. To analyze its impact on the quality of ground surface modelling, the density of the filtered data set was artificially lowered (from 0.89 to 0.09 points/m2) by randomly removing point observations in 10% increments. This provides a comprehensive method of evaluating the impact of LiDAR ground point density on DTM accuracy. While the reduction of point density leads to a less accurate DTM in all cases (as expected), the exact pattern varies by algorithm. The accuracy of the LiDAR-derived DTMs is relatively good even when LiDAR sampling density is reduced to 0.40–0.50 points/m2 (50–60 % of the initial point density), as long as a suitable interpolation algorithm is used (as IDW proved to be less resilient to density reductions below approximately 0.60 points/m2). In the case of slope estimation, the pattern is relatively similar, except the difference in accuracy between IDW and the other two algorithms is even more pronounced than in the case of DTM accuracy. Based on this research, we conclude that LiDAR is an adequate method for collecting morphological data necessary for modelling the ground surface, even when the sampling density is significantly reduced.

scholarly journals DTM-based analysis of the spatial distribution of topolineaments

2020 ◽  
Vol 12 (1) ◽  
pp. 1185-1199
Author(s):  
Mirosław Kamiński
Keyword(s):  
Laser Scanning ◽  
Digital Terrain Model ◽  
Research Area ◽  
Tectonic Structures ◽  
Empirical Bayesian ◽  
Scanning Method ◽  
Empirical Bayesian Kriging ◽  
Terrain Model ◽  
Digital Terrain ◽  
Airborne Laser

AbstractThe research area is located on the boundary between two Paleozoic structural units: the Radom–Kraśnik Block and the Mazovian–Lublin Basin in the southeastern Poland. The tectonic structures are separated by the Ursynów–Kazimierz Dolny fault zone. The digital terrain model obtained by the ALS (Airborne Laser Scanning) method was used. Classification and filtration of an elevation point cloud were performed. Then, from the elevation points representing only surfaces, a digital terrain model was generated. The model was used to visually interpret the course of topolineaments and their automatic extraction from DTM. Two topolineament systems, trending NE–SW and NW–SE, were interpreted. Using the kernel density algorithm, topolineament density models were generated. Using the Empirical Bayesian Kriging, a thickness model of quaternary deposits was generated. A relationship was observed between the course of topolineaments and the distribution and thickness of Quaternary formations. The topolineaments were compared with fault directions marked on tectonic maps of the Paleozoic and Mesozoic. Data validation showed consistency between topolineaments and tectonic faults. The obtained results are encouraging for further research.

scholarly journals Production, Validation and Morphometric Analysis of a Digital Terrain Model for Lake Trichonis Using Geospatial Technologies and Hydroacoustics

2021 ◽  
Vol 10 (2) ◽  
pp. 91
Author(s):  
Triantafyllia-Maria Perivolioti ◽  
Antonios Mouratidis ◽  
Dimitrios Terzopoulos ◽  
Panagiotis Kalaitzis ◽  
Dimitrios Ampatzidis ◽  
...  
Keyword(s):  
Morphometric Analysis ◽  
Ad Hoc ◽  
Regional Scale ◽  
Digital Terrain Model ◽  
Relevant Information ◽  
Relative Difference ◽  
Systematic Observation ◽  
Qualitative And Quantitative ◽  
Terrain Model ◽  
Digital Terrain

Covering an area of approximately 97 km2 and with a maximum depth of 58 m, Lake Trichonis is the largest and one of the deepest natural lakes in Greece. As such, it constitutes an important ecosystem and freshwater reserve at the regional scale, whose qualitative and quantitative properties ought to be monitored. Depth is a crucial parameter, as it is involved in both qualitative and quantitative monitoring aspects. Thus, the availability of a bathymetric model and a reliable DTM (Digital Terrain Model) of such an inland water body is imperative for almost any systematic observation scenario or ad hoc measurement endeavor. In this context, the purpose of this study is to produce a DTM from the only official cartographic source of relevant information available (dating back approximately 70 years) and evaluate its performance against new, independent, high-accuracy hydroacoustic recordings. The validation procedure involves the use of echosoundings coupled with GPS, and is followed by the production of a bathymetric model for the assessment of the discrepancies between the DTM and the measurements, along with the relevant morphometric analysis. Both the production and validation of the DTM are conducted in a GIS environment. The results indicate substantial discrepancies between the old DTM and contemporary acoustic data. A significant overall deviation of 3.39 ± 5.26 m in absolute bottom elevation differences and 0.00 ± 7.26 m in relative difference residuals (0.00 ± 2.11 m after 2nd polynomial model corrector surface fit) of the 2019 bathymetric dataset with respect to the ~1950 lake DTM and overall morphometry appear to be associated with a combination of tectonics, subsidence and karstic phenomena in the area. These observations could prove useful for the tectonics, geodynamics and seismicity with respect to the broader Corinth Rift region, as well as for environmental management and technical interventions in and around the lake. This dictates the necessity for new, extensive bathymetric measurements in order to produce an updated DTM of Lake Trichonis, reflecting current conditions and tailored to contemporary accuracy standards and state-of-the-art research in various disciplines in and around the lake.

scholarly journals Modeling Streamflow and Sediment Loads with a Photogrammetrically Derived UAS Digital Terrain Model: Empirical Evaluation from a Fluvial Aggregate Excavation Operation

Drones ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 20
Author(s):  
Joseph P. Hupy ◽  
Cyril O. Wilson
Keyword(s):  
Soil Erosion ◽  
Point Cloud ◽  
Empirical Evaluation ◽  
Digital Terrain Model ◽  
Surface Flow ◽  
Sediment Loading ◽  
Terrain Model ◽  
Digital Terrain ◽  
Statistical Measures ◽  
Geospatial Datasets

Soil erosion monitoring is a pivotal exercise at macro through micro landscape levels, which directly informs environmental management at diverse spatial and temporal scales. The monitoring of soil erosion can be an arduous task when completed through ground-based surveys and there are uncertainties associated with the use of large-scale medium resolution image-based digital elevation models for estimating erosion rates. LiDAR derived elevation models have proven effective in modeling erosion, but such data proves costly to obtain, process, and analyze. The proliferation of images and other geospatial datasets generated by unmanned aerial systems (UAS) is increasingly able to reveal additional nuances that traditional geospatial datasets were not able to obtain due to the former’s higher spatial resolution. This study evaluated the efficacy of a UAS derived digital terrain model (DTM) to estimate surface flow and sediment loading in a fluvial aggregate excavation operation in Waukesha County, Wisconsin. A nested scale distributed hydrologic flow and sediment loading model was constructed for the UAS point cloud derived DTM. To evaluate the effectiveness of flow and sediment loading generated by the UAS point cloud derived DTM, a LiDAR derived DTM was used for comparison in consonance with several statistical measures of model efficiency. Results demonstrate that the UAS derived DTM can be used in modeling flow and sediment erosion estimation across space in the absence of a LiDAR-based derived DTM.

scholarly journals Ultra-High-Resolution 1 m/pixel CaSSIS DTM Using Super-Resolution Restoration and Shape-from-Shading: Demonstration over Oxia Planum on Mars

2021 ◽  
Vol 13 (11) ◽  
pp. 2185
Author(s):  
Yu Tao ◽  
Sylvain Douté ◽  
Jan-Peter Muller ◽  
Susan J. Conway ◽  
Nicolas Thomas ◽  
...  
Keyword(s):  
High Resolution ◽  
3D Reconstruction ◽  
Imaging System ◽  
Processing System ◽  
Digital Terrain Model ◽  
Super Resolution ◽  
Landing Site ◽  
Shape From Shading ◽  
Stereo Pair ◽  
Terrain Model

We introduce a novel ultra-high-resolution Digital Terrain Model (DTM) processing system using a combination of photogrammetric 3D reconstruction, image co-registration, image super-resolution restoration, shape-from-shading DTM refinement, and 3D co-alignment methods. Technical details of the method are described, and results are demonstrated using a 4 m/pixel Trace Gas Orbiter Colour and Stereo Surface Imaging System (CaSSIS) panchromatic image and an overlapping 6 m/pixel Mars Reconnaissance Orbiter Context Camera (CTX) stereo pair to produce a 1 m/pixel CaSSIS Super-Resolution Restoration (SRR) DTM for different areas over Oxia Planum on Mars—the future ESA ExoMars 2022 Rosalind Franklin rover’s landing site. Quantitative assessments are made using profile measurements and the counting of resolvable craters, in comparison with the publicly available 1 m/pixel High-Resolution Imaging Experiment (HiRISE) DTM. These assessments demonstrate that the final resultant 1 m/pixel CaSSIS DTM from the proposed processing system has achieved comparable and sometimes more detailed 3D reconstruction compared to the overlapping HiRISE DTM.

Sign in / Sign up

Export Citation Format

Share Document